On 08/06/2017 08:24 PM, matthew.gerl...@linux.intel.com wrote: > From: Matthew Gerlach <matthew.gerl...@linux.intel.com>
Thanks for the descriptive commit message. Could you explain what this patch is all about ? > Signed-off-by: Matthew Gerlach <matthew.gerl...@linux.intel.com> [...] > diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile > index c5f171d..1c79324 100644 > --- a/drivers/mtd/spi-nor/Makefile > +++ b/drivers/mtd/spi-nor/Makefile > @@ -1,4 +1,5 @@ > obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o > +obj-$(CONFIG_SPI_ALTERA_ASMIP2) += altera-asmip2.o > obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o > obj-$(CONFIG_SPI_ATMEL_QUADSPI) += atmel-quadspi.o > obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o > @@ -9,4 +10,4 @@ obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o > obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o > obj-$(CONFIG_SPI_INTEL_SPI_PCI) += intel-spi-pci.o > obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM) += intel-spi-platform.o > -obj-$(CONFIG_SPI_STM32_QUADSPI) += stm32-quadspi.o > \ No newline at end of file > +obj-$(CONFIG_SPI_STM32_QUADSPI) += stm32-quadspi.o Drop this hunk > diff --git a/drivers/mtd/spi-nor/altera-asmip2.c > b/drivers/mtd/spi-nor/altera-asmip2.c > new file mode 100644 > index 0000000..2095f2e > --- /dev/null > +++ b/drivers/mtd/spi-nor/altera-asmip2.c > @@ -0,0 +1,474 @@ > +/* > + * Copyright (C) 2017 Intel Corporation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along > with > + * this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/iopoll.h> > +#include <linux/module.h> > +#include <linux/mtd/altera-asmip2.h> > +#include <linux/mtd/mtd.h> > +#include <linux/mtd/spi-nor.h> > +#include <linux/of_device.h> > + > +#define QSPI_ACTION_REG 0 > +#define QSPI_ACTION_RST BIT(0) > +#define QSPI_ACTION_EN BIT(1) > +#define QSPI_ACTION_SC BIT(2) > +#define QSPI_ACTION_CHIP_SEL_SFT 4 > +#define QSPI_ACTION_DUMMY_SFT 8 > +#define QSPI_ACTION_READ_BACK_SFT 16 > + > +#define QSPI_FIFO_CNT_REG 4 > +#define QSPI_FIFO_DEPTH 0x200 > +#define QSPI_FIFO_CNT_MSK 0x3ff > +#define QSPI_FIFO_CNT_RX_SFT 0 > +#define QSPI_FIFO_CNT_TX_SFT 12 Indent the value with a tab at least ... > +#define QSPI_DATA_REG 0x8 > + > +#define QSPI_POLL_TIMEOUT 10000000 In what units is this ? > +#define QSPI_POLL_INTERVAL 5 > + > +struct altera_asmip2 { > + void __iomem *csr_base; > + u32 num_flashes; > + struct device *dev; > + struct altera_asmip2_flash *flash[ALTERA_ASMIP2_MAX_NUM_FLASH_CHIP]; > + struct mutex bus_mutex; > +}; > + > +struct altera_asmip2_flash { > + struct spi_nor nor; > + struct altera_asmip2 *q; > + u32 bank; > +}; > + > +static int altera_asmip2_write_reg(struct spi_nor *nor, u8 opcode, u8 *val, > + int len) > +{ > + struct altera_asmip2_flash *flash = nor->priv; > + struct altera_asmip2 *q = flash->q; > + u32 reg; > + int ret; > + int i; > + > + if ((len + 1) > QSPI_FIFO_DEPTH) { > + dev_err(q->dev, "%s bad len %d > %d\n", > + __func__, len + 1, QSPI_FIFO_DEPTH); > + return -EINVAL; > + } > + > + writel(opcode, q->csr_base + QSPI_DATA_REG); > + > + for (i = 0; i < len; i++) { > + writel((u32)val[i], q->csr_base + QSPI_DATA_REG); iowrite32_rep() ? > + } > + > + reg = QSPI_ACTION_EN | QSPI_ACTION_SC; > + > + writel(reg, q->csr_base + QSPI_ACTION_REG); > + > + ret = readl_poll_timeout(q->csr_base + QSPI_FIFO_CNT_REG, reg, > + (((reg >> QSPI_FIFO_CNT_TX_SFT) & > + QSPI_FIFO_CNT_MSK) == 0), QSPI_POLL_INTERVAL, > + QSPI_POLL_TIMEOUT); > + if (ret) > + dev_err(q->dev, "%s timed out\n", __func__); So if the poll fails , you ignore the failure and continue enabling whatever action you enable here ? > + reg = QSPI_ACTION_EN; > + > + writel(reg, q->csr_base + QSPI_ACTION_REG); > + > + return ret; > +} > + > +static int altera_asmip2_read_reg(struct spi_nor *nor, u8 opcode, u8 *val, > + int len) > +{ > + struct altera_asmip2_flash *flash = nor->priv; > + struct altera_asmip2 *q = flash->q; > + u32 reg; > + int ret; > + int i; > + > + if (len > QSPI_FIFO_DEPTH) { > + dev_err(q->dev, "%s bad len %d > %d\n", > + __func__, len, QSPI_FIFO_DEPTH); > + return -EINVAL; > + } > + > + writel(opcode, q->csr_base + QSPI_DATA_REG); > + > + reg = QSPI_ACTION_EN | QSPI_ACTION_SC | > + (len << QSPI_ACTION_READ_BACK_SFT); > + > + writel(reg, q->csr_base + QSPI_ACTION_REG); > + > + ret = readl_poll_timeout(q->csr_base + QSPI_FIFO_CNT_REG, reg, > + ((reg & QSPI_FIFO_CNT_MSK) == len), > + QSPI_POLL_INTERVAL, QSPI_POLL_TIMEOUT); > + > + if (!ret) > + for (i = 0; i < len; i++) { > + reg = readl(q->csr_base + QSPI_DATA_REG); > + val[i] = (u8)(reg & 0xff); ioread32_rep , plus same comments as for the write function > + } > + else > + dev_err(q->dev, "%s timeout\n", __func__); > + > + writel(QSPI_ACTION_EN, q->csr_base + QSPI_ACTION_REG); > + > + return ret; > +} > + > +static ssize_t altera_asmip2_read(struct spi_nor *nor, loff_t from, size_t > len, > + u_char *buf) > +{ > + struct altera_asmip2_flash *flash = nor->priv; > + struct altera_asmip2 *q = flash->q; > + size_t bytes_to_read, i; > + u32 reg; > + int ret; > + > + bytes_to_read = min_t(size_t, len, QSPI_FIFO_DEPTH); > + > + writel(nor->read_opcode, q->csr_base + QSPI_DATA_REG); > + > + writel((from & 0xff000000) >> 24, q->csr_base + QSPI_DATA_REG); > + writel((from & 0x00ff0000) >> 16, q->csr_base + QSPI_DATA_REG); > + writel((from & 0x0000ff00) >> 8, q->csr_base + QSPI_DATA_REG); > + writel((from & 0x000000ff), q->csr_base + QSPI_DATA_REG); Use a for() loop ? > + reg = QSPI_ACTION_EN | QSPI_ACTION_SC | > + (10 << QSPI_ACTION_DUMMY_SFT) | > + (bytes_to_read << QSPI_ACTION_READ_BACK_SFT); > + > + writel(reg, q->csr_base + QSPI_ACTION_REG); > + > + ret = readl_poll_timeout(q->csr_base + QSPI_FIFO_CNT_REG, reg, > + ((reg & QSPI_FIFO_CNT_MSK) == > + bytes_to_read), QSPI_POLL_INTERVAL, > + QSPI_POLL_TIMEOUT); > + if (ret) { > + dev_err(q->dev, "%s timed out\n", __func__); > + bytes_to_read = 0; > + } else > + for (i = 0; i < bytes_to_read; i++) { > + reg = readl(q->csr_base + QSPI_DATA_REG); > + *buf++ = (u8)(reg & 0xff); ioread8_rep or something ? > + } > + > + writel(QSPI_ACTION_EN, q->csr_base + QSPI_ACTION_REG); > + > + return bytes_to_read; > +} > + > +static ssize_t altera_asmip2_write(struct spi_nor *nor, loff_t to, > + size_t len, const u_char *buf) > +{ > + struct altera_asmip2_flash *flash = nor->priv; > + struct altera_asmip2 *q = flash->q; > + size_t bytes_to_write, i; > + u32 reg; > + int ret; > + > + bytes_to_write = min_t(size_t, len, (QSPI_FIFO_DEPTH - 5)); > + > + writel(nor->program_opcode, q->csr_base + QSPI_DATA_REG); > + > + writel((to & 0xff000000) >> 24, q->csr_base + QSPI_DATA_REG); > + writel((to & 0x00ff0000) >> 16, q->csr_base + QSPI_DATA_REG); > + writel((to & 0x0000ff00) >> 8, q->csr_base + QSPI_DATA_REG); > + writel((to & 0x000000ff), q->csr_base + QSPI_DATA_REG); > + > + for (i = 0; i < bytes_to_write; i++) { > + reg = (u32)*buf++; > + writel(reg, q->csr_base + QSPI_DATA_REG); > + } > + > + reg = QSPI_ACTION_EN | QSPI_ACTION_SC; > + > + writel(reg, q->csr_base + QSPI_ACTION_REG); > + > + ret = readl_poll_timeout(q->csr_base + QSPI_FIFO_CNT_REG, reg, > + (((reg >> QSPI_FIFO_CNT_TX_SFT) & > + QSPI_FIFO_CNT_MSK) == 0), QSPI_POLL_INTERVAL, > + QSPI_POLL_TIMEOUT); > + > + if (ret) { > + dev_err(q->dev, > + "%s timed out waiting for fifo to clear\n", > + __func__); > + bytes_to_write = 0; > + } > + > + writel(QSPI_ACTION_EN, q->csr_base + QSPI_ACTION_REG); > + > + return bytes_to_write; > + > +} > + > +static int altera_asmip2_prep(struct spi_nor *nor, enum spi_nor_ops ops) > +{ > + struct altera_asmip2_flash *flash = nor->priv; > + struct altera_asmip2 *q = flash->q; > + > + mutex_lock(&q->bus_mutex); We should factor this mutex stuff into the SPI NOR framework, this pattern is repeating itself way too often. > + return 0; > +} > + > +static void altera_asmip2_unprep(struct spi_nor *nor, enum spi_nor_ops ops) > +{ > + struct altera_asmip2_flash *flash = nor->priv; > + struct altera_asmip2 *q = flash->q; > + > + mutex_unlock(&q->bus_mutex); > +} > + > +static int altera_asmip2_setup_banks(struct device *dev, > + u32 bank, struct device_node *np) > +{ > + const struct spi_nor_hwcaps hwcaps = { > + .mask = SNOR_HWCAPS_READ | > + SNOR_HWCAPS_READ_FAST | > + SNOR_HWCAPS_PP, > + }; > + struct altera_asmip2 *q = dev_get_drvdata(dev); > + struct altera_asmip2_flash *flash; > + struct spi_nor *nor; > + int ret = 0; > + char modalias[40] = {0}; > + > + if (bank > q->num_flashes - 1) > + return -EINVAL; > + > + flash = devm_kzalloc(q->dev, sizeof(*flash), GFP_KERNEL); > + if (!flash) > + return -ENOMEM; > + > + q->flash[bank] = flash; > + flash->q = q; > + flash->bank = bank; > + > + nor = &flash->nor; > + nor->dev = dev; > + nor->priv = flash; > + nor->mtd.priv = nor; > + spi_nor_set_flash_node(nor, np); > + > + /* spi nor framework*/ > + nor->read_reg = altera_asmip2_read_reg; > + nor->write_reg = altera_asmip2_write_reg; > + nor->read = altera_asmip2_read; > + nor->write = altera_asmip2_write; > + nor->prepare = altera_asmip2_prep; > + nor->unprepare = altera_asmip2_unprep; > + > + /* scanning flash and checking dev id */ > +#ifdef CONFIG_OF Why is this here ? > + if (np && (of_modalias_node(np, modalias, sizeof(modalias)) < 0)) > + return -EINVAL; > +#endif > + > + ret = spi_nor_scan(nor, modalias, &hwcaps); > + if (ret) { > + dev_err(nor->dev, "flash not found\n"); > + return ret; > + } > + > + ret = mtd_device_register(&nor->mtd, NULL, 0); > + > + return ret; > +} > + > +static int altera_asmip2_create(struct device *dev, void __iomem *csr_base) > +{ > + struct altera_asmip2 *q; > + u32 reg; > + > + q = devm_kzalloc(dev, sizeof(*q), GFP_KERNEL); > + if (!q) > + return -ENOMEM; > + > + q->dev = dev; > + q->csr_base = csr_base; > + > + mutex_init(&q->bus_mutex); > + > + dev_set_drvdata(dev, q); > + > + reg = readl(q->csr_base + QSPI_ACTION_REG); > + if (!(reg & QSPI_ACTION_RST)) { > + writel((reg | QSPI_ACTION_RST), q->csr_base + QSPI_ACTION_REG); > + dev_info(dev, "%s asserting reset\n", __func__); > + udelay(10); > + } > + > + writel((reg & ~QSPI_ACTION_RST), q->csr_base + QSPI_ACTION_REG); > + udelay(10); > + > + return 0; > +} > + > +static int altera_qspi_add_bank(struct device *dev, > + u32 bank, struct device_node *np) > +{ > + struct altera_asmip2 *q = dev_get_drvdata(dev); > + > + if (q->num_flashes >= ALTERA_ASMIP2_MAX_NUM_FLASH_CHIP) > + return -ENOMEM; > + > + q->num_flashes++; > + > + return altera_asmip2_setup_banks(dev, bank, np); > +} > + > +static int altera_asmip2_remove_banks(struct device *dev) > +{ > + struct altera_asmip2 *q = dev_get_drvdata(dev); > + struct altera_asmip2_flash *flash; > + int i; > + int ret = 0; > + > + if (!q) > + return -EINVAL; > + > + /* clean up for all nor flash */ > + for (i = 0; i < q->num_flashes; i++) { > + flash = q->flash[i]; > + if (!flash) > + continue; > + > + /* clean up mtd stuff */ > + ret = mtd_device_unregister(&flash->nor.mtd); > + if (ret) { > + dev_err(dev, "error removing mtd\n"); > + return ret; > + } > + } > + > + return 0; > +} > + > +static int __probe_with_data(struct platform_device *pdev, > + struct altera_asmip2_plat_data *qdata) > +{ > + struct device *dev = &pdev->dev; > + int ret, i; > + > + ret = altera_asmip2_create(dev, qdata->csr_base); > + > + if (ret) { > + dev_err(dev, "failed to create qspi device %d\n", ret); > + return ret; > + } > + > + for (i = 0; i < qdata->num_chip_sel; i++) { > + ret = altera_qspi_add_bank(dev, i, NULL); > + if (ret) { > + dev_err(dev, "failed to add qspi bank %d\n", ret); > + break; > + } > + } > + > + return ret; > +} > + > +static int altera_asmip2_probe(struct platform_device *pdev) > +{ > + struct device_node *np = pdev->dev.of_node; > + struct device *dev = &pdev->dev; > + struct altera_asmip2_plat_data *qdata; > + struct resource *res; > + void __iomem *csr_base; > + u32 bank; > + int ret; > + struct device_node *pp; > + > + qdata = dev_get_platdata(dev); > + > + if (qdata) > + return __probe_with_data(pdev, qdata); Avoid function names with __ prefix. > + if (!np) { > + dev_err(dev, "no device tree found %p\n", pdev); > + return -ENODEV; > + } You might as well introduce a function to probe with of to be consistent ... or convert between pdata and ofdata and have one function for both. > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + csr_base = devm_ioremap_resource(dev, res); > + if (IS_ERR(csr_base)) { > + dev_err(dev, "%s: ERROR: failed to map csr base\n", __func__); > + return PTR_ERR(csr_base); > + } > + > + ret = altera_asmip2_create(dev, csr_base); > + > + if (ret) { > + dev_err(dev, "failed to create qspi device\n"); > + return ret; > + } > + > + for_each_available_child_of_node(np, pp) { > + of_property_read_u32(pp, "reg", &bank); > + if (bank >= ALTERA_ASMIP2_MAX_NUM_FLASH_CHIP) { > + dev_err(dev, "bad reg value %u >= %u\n", bank, > + ALTERA_ASMIP2_MAX_NUM_FLASH_CHIP); > + goto error; > + } > + > + if (altera_qspi_add_bank(dev, bank, pp)) { > + dev_err(dev, "failed to add bank %u\n", bank); > + goto error; > + } > + } > + > + return 0; > +error: > + altera_asmip2_remove_banks(dev); > + return -EIO; > +} > + > +static int altera_asmip2_remove(struct platform_device *pdev) > +{ > + if (!pdev) { > + dev_err(&pdev->dev, "%s NULL\n", __func__); > + return -EINVAL; Can this really happen ? > + } else { > + return altera_asmip2_remove_banks(&pdev->dev); > + } > +} > + > +static const struct of_device_id altera_asmip2_id_table[] = { > + > + { .compatible = "altr,asmi_parallel2",}, > + {} > +}; > +MODULE_DEVICE_TABLE(of, altera_asmip2_id_table); > + > +static struct platform_driver altera_asmip2_driver = { > + .driver = { > + .name = ALTERA_ASMIP2_DRV_NAME, > + .of_match_table = altera_asmip2_id_table, > + }, > + .probe = altera_asmip2_probe, > + .remove = altera_asmip2_remove, > +}; > +module_platform_driver(altera_asmip2_driver); > + > +MODULE_AUTHOR("Matthew Gerlach <matthew.gerl...@linux.intel.com>"); > +MODULE_DESCRIPTION("Altera ASMI Parallel II"); > +MODULE_LICENSE("GPL v2"); > +MODULE_ALIAS("platform:" ALTERA_ASMIP2_DRV_NAME); > diff --git a/include/linux/mtd/altera-asmip2.h > b/include/linux/mtd/altera-asmip2.h > new file mode 100644 > index 0000000..580c43c > --- /dev/null > +++ b/include/linux/mtd/altera-asmip2.h > @@ -0,0 +1,24 @@ > +/* > + * > + * Copyright 2017 Intel Corporation, Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + */ > +#ifndef __ALTERA_QUADSPI_H > +#define __ALTERA_QUADSPI_H > + > +#include <linux/device.h> > + > +#define ALTERA_ASMIP2_DRV_NAME "altr-asmip2" > +#define ALTERA_ASMIP2_MAX_NUM_FLASH_CHIP 3 > +#define ALTERA_ASMIP2_RESOURCE_SIZE 0x10 > + > +struct altera_asmip2_plat_data { > + void __iomem *csr_base; > + u32 num_chip_sel; > +}; > + > +#endif > -- Best regards, Marek Vasut