On Sun, 2017-08-06 at 10:06 +0800, Ryder Lee wrote:
> Hi Honghui,
>
> If you plan to send next version, then I would suggest some minor
> changes.
>
> On Fri, 2017-08-04 at 20:06 +0800, honghui.zh...@mediatek.com wrote:
> > +#define PCIE_CRSTB BIT(3)
> > +#define PCIE_PERSTB BIT(8)
> > +#define PCI_LINKDOWN_RST_EN GENMASK(15, 13)
>
> PCIE_LINKDOWN_RST_EN
Thanks, I will change it in the next version.
>
> > +#define PCIE_LINK_STATUS_V2 0x804
> > +#define PCIE_PORT_LINKUP_V2 BIT(10)
> > +
> > +
> > +static int mtk_pcie_hw_rd_cfg(struct mtk_pcie_port *port, u32 bus, u32
> > devfn,
> > + int where, int size, u32 *val)
> > +{
> > + int reg, shift = 8 * (where & 3);
>
> int reg => u32
sharp eyes, thanks.
>
> > + /* Write PCIe Configuration Transaction Header for cfgrd */
> > + writel(CFG_HEADER_DW0(CFG_WRRD_TYPE_0, CFG_RD_FMT),
> > + port->base + PCIE_CFG_HEADER0);
> > + writel(CFG_HEADER_DW1(where, size), port->base + PCIE_CFG_HEADER1);
> > + writel(CFG_HEADER_DW2(where, PCI_FUNC(devfn), PCI_SLOT(devfn), bus),
> > + port->base + PCIE_CFG_HEADER2);
> > +
> > + /* Trigger h/w to transmit Cfgrd TLP */
> > + reg = readl(port->base + PCIE_APP_TLP_REQ);
> > + writel(reg | APP_CFG_REQ, port->base + PCIE_APP_TLP_REQ);
> > +
> > + /* Check completion status */
> > + if (mtk_pcie_check_cfg_cpld(port))
> > + return PCIBIOS_SET_FAILED;
> > +
> > + /* Read cpld payload of Cfgrd */
> > + *val = readl(port->base + PCIE_CFG_RDATA);
> > +
> > + switch (size) {
> > + case 4:
> > + break;
> > + case 3:
> > + *val = (*val >> shift) & 0xffffff;
> > + break;
> > + case 2:
> > + *val = (*val >> shift) & 0xffff;
> > + break;
> > + case 1:
> > + *val = (*val >> shift) & 0xff;
> > + break;
> > + default:
> > + return PCIBIOS_BAD_REGISTER_NUMBER;
> > + }
>
> Do we really need case 3? I guess case 1, 2 or 4 should be enough.
>
I will change this as the following snippet:
if (size == 1)
*val = (*val >> (8 * (where & 3))) & 0xff;
else if (size == 2)
*val = (*val >> (8 * (where & 3))) & 0xffff;
thanks.
> > + return PCIBIOS_SUCCESSFUL;
> > +}
> > +
> > +static int mtk_pcie_hw_wr_cfg(struct mtk_pcie_port *port, u32 bus, u32
> > devfn,
> > + int where, int size, u32 val)
> > +{
> > + /* Write PCIe Configuration Transaction Header for Cfgwr */
> > + writel(CFG_HEADER_DW0(CFG_WRRD_TYPE_0, CFG_WR_FMT),
> > + port->base + PCIE_CFG_HEADER0);
> > + writel(CFG_HEADER_DW1(where, size), port->base + PCIE_CFG_HEADER1);
> > + writel(CFG_HEADER_DW2(where, PCI_FUNC(devfn), PCI_SLOT(devfn), bus),
> > + port->base + PCIE_CFG_HEADER2);
> > +
> > + /* Write cfgwr data */
> > + val = val << 8 * (where & 3);
> > + writel(val, port->base + PCIE_CFG_WDATA);
> > +
> > + /* Trigger h/w to transmit Cfgwr TLP */
> > + val = readl(port->base + PCIE_APP_TLP_REQ);
> > + val |= APP_CFG_REQ;
> > + writel(val, port->base + PCIE_APP_TLP_REQ);
> > +
> > + /* Check completion status */
> > + return mtk_pcie_check_cfg_cpld(port);
> > +}
> > +
> > +static int mtk_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
> > + int where, int size, u32 *val)
> > +{
> > + struct mtk_pcie_port *port = NULL, *iter, *tmp;
> > + struct mtk_pcie *pcie = bus->sysdata;
> > + u32 bn = bus->number;
> > + int ret;
> > +
> > + list_for_each_entry_safe(iter, tmp, &pcie->ports, list)
> > + if (iter->index == PCI_SLOT(devfn)) {
> > + port = iter;
> > + break;
> > + }
> > +
> > + if (!port) {
> > + *val = ~0;
> > + return PCIBIOS_DEVICE_NOT_FOUND;
> > + }
>
> list_for_each_entry(), since you don't really remove or free something.
>
> I know you need to find port->base to write/read configuration space. I
> think it's better to move this part to another function. You can take a
> look at pci-mvebu.c mvebu_pcie_find_portmvebu().
Sure, I will add the mtk_pcie_find_port interface, then the code is a
bit more readable.
thanks.
>
> > + ret = mtk_pcie_hw_rd_cfg(port, bn, devfn, where, size, val);
> > + if (ret)
> > + *val = ~0;
> > +
> > + return ret;
> > +}
> > +
> > +static int mtk_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
> > + int where, int size, u32 val)
> > +{
> > + struct mtk_pcie_port *port = NULL, *iter, *tmp;
> > + struct mtk_pcie *pcie = bus->sysdata;
> > + u32 bn = bus->number;
> > +
> > + list_for_each_entry_safe(iter, tmp, &pcie->ports, list)
> > + if (iter->index == PCI_SLOT(devfn)) {
> > + port = iter;
> > + break;
> > + }
> > +
> > + if (!port)
> > + return PCIBIOS_DEVICE_NOT_FOUND;
>
> Ditto.
>
> > + return mtk_pcie_hw_wr_cfg(port, bn, devfn, where, size, val);
> > +}
> > +
> > +static struct pci_ops mtk_pcie_ops_v2 = {
> > + .read = mtk_pcie_config_read,
> > + .write = mtk_pcie_config_write,
> > +};
> > +
> > +static int mtk_pcie_startup_ports_v2(struct mtk_pcie_port *port)
> > +{
> > + struct mtk_pcie *pcie = port->pcie;
> > + struct resource *mem = &pcie->mem;
> > + u32 val;
> > + size_t size;
> > + int err;
> > +
> > + /* mt7622 platforms need to enable LTSSM and ASPM from PCIe subsys */
> > + if (pcie->base) {
> > + val = readl(pcie->base + PCIE_SYS_CFG_V2);
> > + val |= PCIE_CSR_LTSSM_EN(port->index) |
> > + PCIE_CSR_ASPM_L1_EN(port->index);
> > + writel(val, pcie->base + PCIE_SYS_CFG_V2);
> > + }
> > +
> > + /* Assert all reset signals */
> > + writel(0, port->base + PCIE_RST_CTRL);
> > +
> > + /*
> > + * Enable PCIe link down reset, if link status changed from link up to
> > + * link down, this will reset MAC control registers and configuration
> > + * space.
> > + */
> > + writel(PCI_LINKDOWN_RST_EN, port->base + PCIE_RST_CTRL);
> > +
> > + /* De-assert PHY, PE, PIPE, MAC and configuration reset */
> > + val = readl(port->base + PCIE_RST_CTRL);
> > + val |= PCIE_PHY_RSTB | PCIE_PERSTB | PCIE_PIPE_SRSTB |
> > + PCIE_MAC_SRSTB | PCIE_CRSTB;
> > + writel(val, port->base + PCIE_RST_CTRL);
> > +
> > + /* PCIe v2.0 need at least 100ms delay to train from Gen1 to Gen2 */
>
> /* 100ms timeout value should be enough for Gen1/2 training */ for
> consistency.
>
> > + err = readl_poll_timeout(port->base + PCIE_LINK_STATUS_V2, val,
> > + !!(val & PCIE_PORT_LINKUP_V2), 20,
> > + 100 * USEC_PER_MSEC);
> > + if (err)
> > + return -ETIMEDOUT;
> > +
> > + /* Set INTx mask */
> > + val = readl(port->base + PCIE_INT_MASK);
> > + val &= ~INTX_MASK;
> > + writel(val, port->base + PCIE_INT_MASK);
> > +
> > + /* Set AHB to PCIe translation windows */
> > + size = mem->end - mem->start;
> > + val = AHB2PCIE_BASEL(mem->start) | AHB2PCIE_SIZE(fls(size));
> > + writel(val, port->base + PCIE_AHB_TRANS_BASE0_L);
> > +
> > + val = AHB2PCIE_BASEH(mem->start);
> > + writel(val, port->base + PCIE_AHB_TRANS_BASE0_H);
> > +
> > + /* Set PCIe to AXI translation memory space.*/
> > + val = fls(0xffffffff) | WIN_ENABLE;
> > + writel(val, port->base + PCIE_AXI_WINDOW0);
> > +
> > + return 0;
> > +}
>
> Ryder
>
