Add scaler module configuration support to be able to apply scaling.

Signed-off-by: Todor Tomov <todor.to...@linaro.org>
---
 drivers/media/platform/qcom/camss-8x16/camss-vfe.c | 59 +++++++++++++++++-----
 1 file changed, 46 insertions(+), 13 deletions(-)

diff --git a/drivers/media/platform/qcom/camss-8x16/camss-vfe.c 
b/drivers/media/platform/qcom/camss-8x16/camss-vfe.c
index c6b230b..cc1fc68 100644
--- a/drivers/media/platform/qcom/camss-8x16/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss-8x16/camss-vfe.c
@@ -198,13 +198,16 @@
 #define VFE_0_DEMUX_ODD_CFG_PATTERN_UYVY       0xc9ca
 #define VFE_0_DEMUX_ODD_CFG_PATTERN_VYUY       0xcac9
 
+#define VFE_0_SCALE_ENC_Y_CFG                  0x75c
+#define VFE_0_SCALE_ENC_Y_H_IMAGE_SIZE         0x760
+#define VFE_0_SCALE_ENC_Y_H_PHASE              0x764
+#define VFE_0_SCALE_ENC_Y_V_IMAGE_SIZE         0x76c
+#define VFE_0_SCALE_ENC_Y_V_PHASE              0x770
 #define VFE_0_SCALE_ENC_CBCR_CFG               0x778
 #define VFE_0_SCALE_ENC_CBCR_H_IMAGE_SIZE      0x77c
 #define VFE_0_SCALE_ENC_CBCR_H_PHASE           0x780
-#define VFE_0_SCALE_ENC_CBCR_H_PAD             0x78c
 #define VFE_0_SCALE_ENC_CBCR_V_IMAGE_SIZE      0x790
 #define VFE_0_SCALE_ENC_CBCR_V_PHASE           0x794
-#define VFE_0_SCALE_ENC_CBCR_V_PAD             0x7a0
 
 #define VFE_0_CLAMP_ENC_MAX_CFG                        0x874
 #define VFE_0_CLAMP_ENC_MAX_CFG_CH0            (0xff << 0)
@@ -670,6 +673,20 @@ static void vfe_set_demux_cfg(struct vfe_device *vfe, 
struct vfe_line *line)
        writel_relaxed(odd_cfg, vfe->base + VFE_0_DEMUX_ODD_CFG);
 }
 
+static inline u8 vfe_calc_interp_reso(u16 input, u16 output)
+{
+       if (input / output >= 16)
+               return 0;
+
+       if (input / output >= 8)
+               return 1;
+
+       if (input / output >= 4)
+               return 2;
+
+       return 3;
+}
+
 static void vfe_set_scale_cfg(struct vfe_device *vfe, struct vfe_line *line)
 {
        u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
@@ -678,35 +695,51 @@ static void vfe_set_scale_cfg(struct vfe_device *vfe, 
struct vfe_line *line)
        u8 interp_reso;
        u32 phase_mult;
 
+       writel_relaxed(0x3, vfe->base + VFE_0_SCALE_ENC_Y_CFG);
+
+       input = line->fmt[MSM_VFE_PAD_SINK].width;
+       output = line->compose.width;
+       reg = (output << 16) | input;
+       writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_H_IMAGE_SIZE);
+
+       interp_reso = vfe_calc_interp_reso(input, output);
+       phase_mult = input * (1 << (13 + interp_reso)) / output;
+       reg = (interp_reso << 20) | phase_mult;
+       writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_H_PHASE);
+
+       input = line->fmt[MSM_VFE_PAD_SINK].height;
+       output = line->compose.height;
+       reg = (output << 16) | input;
+       writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_V_IMAGE_SIZE);
+
+       interp_reso = vfe_calc_interp_reso(input, output);
+       phase_mult = input * (1 << (13 + interp_reso)) / output;
+       reg = (interp_reso << 20) | phase_mult;
+       writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_V_PHASE);
+
        writel_relaxed(0x3, vfe->base + VFE_0_SCALE_ENC_CBCR_CFG);
 
        input = line->fmt[MSM_VFE_PAD_SINK].width;
-       output = line->fmt[MSM_VFE_PAD_SRC].width / 2;
+       output = line->compose.width / 2;
        reg = (output << 16) | input;
        writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_H_IMAGE_SIZE);
 
-       interp_reso = 3;
+       interp_reso = vfe_calc_interp_reso(input, output);
        phase_mult = input * (1 << (13 + interp_reso)) / output;
        reg = (interp_reso << 20) | phase_mult;
        writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_H_PHASE);
 
-       reg = input;
-       writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_H_PAD);
-
        input = line->fmt[MSM_VFE_PAD_SINK].height;
-       output = line->fmt[MSM_VFE_PAD_SRC].height;
+       output = line->compose.height;
        if (p == V4L2_PIX_FMT_NV12 || p == V4L2_PIX_FMT_NV21)
-               output = line->fmt[MSM_VFE_PAD_SRC].height / 2;
+               output = line->compose.height / 2;
        reg = (output << 16) | input;
        writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_V_IMAGE_SIZE);
 
-       interp_reso = 3;
+       interp_reso = vfe_calc_interp_reso(input, output);
        phase_mult = input * (1 << (13 + interp_reso)) / output;
        reg = (interp_reso << 20) | phase_mult;
        writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_V_PHASE);
-
-       reg = input;
-       writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_V_PAD);
 }
 
 static void vfe_set_clamp_cfg(struct vfe_device *vfe)
-- 
2.7.4

Reply via email to