* v2:
1. Discussion is going on with HW team to fix the offset issue in next chip
version so removed the RCG patch
2. Made “fix 16 bit alpha support calculation” generic to support all cases.
3. Clubbed the [1] and Patch [2] for "support for dynamic updating the PLL"
a. The PLL_LATCH_INTERFACE bit is not available in every Alpha PLL and it
will be turned off after default power on. If the PLL user want to turn
off the LATCH_INTERFACE then they can directly set this bit in
PLL_USER_CTL_U during alpha_pll_configure and clear the dynamic update
flag bit
b. The latching procedure is only required if PLL is enabled
c. The handling is different according to PLL_UPDATE_BYPASS bit
4. Added the patch for “2 bit PLL post divider”
[1] https://www.spinics.net/lists/linux-arm-msm/msg24569.html
[2] https://www.spinics.net/lists/kernel/msg2566714.html
* v1:
https://www.spinics.net/lists/kernel/msg2566710.html
Abhishek Sahu (12):
clk: qcom: flag for 64 bit CONFIG_CTL
clk: qcom: support for alpha mode configuration
clk: qcom: use offset from alpha pll node
clk: qcom: fix 16 bit alpha support calculation
clk: qcom: support for dynamic updating the PLL
clk: qcom: add flag for VCO operation
clk: qcom: support for Huayra PLL
clk: qcom: support for Brammo PLL
clk: qcom: support for 2 bit PLL post divider
clk: qcom: add read-only alpha pll post divider operations
clk: qcom: add read-only divider operations
clk: qcom: add parent map for regmap mux
drivers/clk/qcom/clk-alpha-pll.c | 507 +++++++++++++++++++++++++++-------
drivers/clk/qcom/clk-alpha-pll.h | 49 +++-
drivers/clk/qcom/clk-rcg.h | 10 -
drivers/clk/qcom/clk-regmap-divider.c | 29 ++
drivers/clk/qcom/clk-regmap-divider.h | 1 +
drivers/clk/qcom/clk-regmap-mux.c | 6 +
drivers/clk/qcom/clk-regmap-mux.h | 2 +
drivers/clk/qcom/common.h | 11 +-
drivers/clk/qcom/gcc-ipq8074.c | 6 +-
drivers/clk/qcom/gcc-msm8994.c | 12 +-
drivers/clk/qcom/gcc-msm8996.c | 12 +-
drivers/clk/qcom/mmcc-msm8996.c | 48 ++--
12 files changed, 554 insertions(+), 139 deletions(-)
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of
Code Aurora Forum, hosted by The Linux Foundation
