On Sun, Aug 06, 2017 at 11:24:02AM -0700, matthew.gerl...@linux.intel.com wrote:
> From: Matthew Gerlach <matthew.gerl...@linux.intel.com>
>
> Device Tree bindinds for Altera ASMI Parallel II IP Core.
s/bindinds/bindings/
>
> Signed-off-by: Matthew Gerlach <matthew.gerl...@linux.intel.com>
> ---
> .../devicetree/bindings/mtd/altera-asmip2.txt | 22
> ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mtd/altera-asmip2.txt
>
> diff --git a/Documentation/devicetree/bindings/mtd/altera-asmip2.txt
> b/Documentation/devicetree/bindings/mtd/altera-asmip2.txt
> new file mode 100644
> index 0000000..3380366
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/altera-asmip2.txt
> @@ -0,0 +1,22 @@
> +* Altera ASMI Parallel II IP Core
> +
> +Required properties:
> +- compatible : Should be "altr,asmi_parallel2".
s/_/-/
> +- reg : A tuple consisting of a physical address and length.
> +
> +Optional subnodes:
> +Subnodes of the Altera ASMI Paralllel II IP Core are spi slave nodes.
But this is not a general purpose SPI controller?
> +- reg : chip select value
> +- label : optional user friendly label
> +
> +Example:
> +
> +qspi: spi@a0001000 {
> + compatible = "altr,asmi_parallel2";
> + reg = <0xa0001000 0x10>;
> +
> + flash@0 {
This should have a compatible.
> + reg = <0>;
> + label = "FPGA Image";
> + };
> +};
> --
> 2.7.4
>
