Add rockchip,usbgrf property to support the registers of usb-phy
that are distributed in grf and usbgrf on some special Rockchip
SoCs (e.g RV1108).
Signed-off-by: Frank Wang <frank.w...@rock-chips.com>
---
Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
index 84d59b0..69041373 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
@@ -18,6 +18,10 @@ Optional properties:
usb-phy output 480m and xin24m.
Refer to clk/clock-bindings.txt for generic clock
consumer properties.
+ - rockchip,usbgrf : phandle to the syscon managing the "usb general
+ register files". When set driver will request its
+ phandle as one companion-grf for some special SoCs
+ (e.g RV1108).
Required nodes : a sub-node is required for each port the phy provides.
The sub-node name is used to identify host or otg port,
--
2.0.0
