[PATCH] arm64: allwinner: a64: pine64: Use dcdc1 regulator for mmc0

[Jagan Teki]

From: Jagan Teki <ja...@amarulasolutions.com>

Since current tree support AXP803 regulators, replace
fixed regulator with AXP803 dcdc1 regulator.

Tested on pine64.

Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts 
b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 122b5d8..604cdae 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -62,13 +62,6 @@
        chosen {
                stdout-path = "serial0:115200n8";
        };
-
-       reg_vcc3v3: vcc3v3 {
-               compatible = "regulator-fixed";
-               regulator-name = "vcc3v3";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-       };
 };
 
 &ehci0 {
@@ -109,7 +102,7 @@
 &mmc0 {
        pinctrl-names = "default";
        pinctrl-0 = <&mmc0_pins>;
-       vmmc-supply = <&reg_vcc3v3>;
+       vmmc-supply = <&reg_dcdc1>;
        cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
        cd-inverted;
        disable-wp;
-- 
2.7.4