On Tue, Aug 15, 2017 at 11:49:19AM +0800, Sandy Huang wrote:
> This patch add Document for Rockchip Soc RK3288 LVDS,
> This based on the patches from Mark yao and Heiko Stuebner.
>
> Signed-off-by: Sandy Huang <h...@rock-chips.com>
> Signed-off-by: Mark yao <mark....@rock-chips.com>
> Signed-off-by: Heiko Stuebner <he...@sntech.de>
> ---
> Changes according to Mark Yao reviews.
>
> .../bindings/display/rockchip/rockchip-lvds.txt | 105
> +++++++++++++++++++++
> 1 file changed, 105 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
>
> diff --git
> a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
> b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
> new file mode 100644
> index 0000000..c153411
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
> @@ -0,0 +1,105 @@
> +Rockchip RK3288 LVDS interface
> +================================
> +
> +Required properties:
> +- compatible: matching the soc type, one of
> + - "rockchip,rk3288-lvds";
> +
> +- reg: physical base address of the controller and length
> + of memory mapped region.
> +- clocks: must include clock specifiers corresponding to entries in the
> + clock-names property.
> +- clock-names: must contain "pclk_lvds"
> +
> +- avdd1v0-supply: regulator phandle for 1.0V analog power
> +- avdd1v8-supply: regulator phandle for 1.8V analog power
> +- avdd3v3-supply: regulator phandle for 3.3V analog power
> +
> +- rockchip,grf: phandle to the general register files syscon
> +
> +Optional properties:
> +- pinctrl-names: must contain a "lcdc" entry.
> +- pinctrl-0: pin control group to be used for this controller.
> +
> +Required nodes:
> +
> +The lvds has two video ports as described by
> + Documentation/devicetree/bindings/media/video-interfaces.txt.
> +Their connections are modeled using the OF graph bindings specified in
> + Documentation/devicetree/bindings/graph.txt.
> +
> +- video port 0 for the VOP inputs
> +- video port 1 for either a panel or subsequent encoder
> +
> +the lvds panel described by
> + Documentation/devicetree/bindings/display/panel/simple-panel.txt
> +
> +Panel required properties:
> +- rockchip,data-width : should be <18> or <24>;
> +- rockchip,output: should be "rgb", "lvds" or "duallvds",
> + This describes the output face.
These either aren't needed or shouldn't be Rockchip specific. Probably
the former because no one else has them so far.
> +- ports for remote LVDS output
> +
> +Panel optional properties:
> +- rockchip,data-mapping: should be "vesa" or "jeida",
> + This describes how the color bits are laid out in the
> + serialized LVDS signal.
There's a common property for this.
> +Example:
> +
> +lvds_panel: lvds-panel {
> + status = "okay";
> + compatible = "simple-panel";
Not a valid compatible. simple-panel is more a driver, than a binding.
> + enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
> + rockchip,data-mapping = "jeida";
> + rockchip,data-width = <24>;
> + rockchip,output = "rgb";
> +
> + ports {
> + panel_in_lvds: endpoint {
> + remote-endpoint = <&lvds_out_panel>;
> + };
> + };
> +};
> +
> +For Rockchip RK3288:
> +
> + lvds: lvds@ff96c000 {
> + compatible = "rockchip,rk3288-lvds";
> + rockchip,grf = <&grf>;
> + reg = <0xff96c000 0x4000>;
> + clocks = <&cru PCLK_LVDS_PHY>;
> + clock-names = "pclk_lvds";
> + pinctrl-names = "lcdc";
> + pinctrl-0 = <&lcdc_ctl>;
> + avdd1v0-supply = <&vdd10_lcd>;
> + avdd1v8-supply = <&vcc18_lcd>;
> + avdd3v3-supply = <&vcca_33>;
> + rockchip,data-mapping = "jeida";
> + rockchip,data-width = <24>;
> + rockchip,output = "rgb";
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + lvds_in: port@0 {
> + reg = <0>;
> +
> + lvds_in_vopb: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&vopb_out_lvds>;
> + };
> + lvds_in_vopl: endpoint@1 {
> + reg = <1>;
> + remote-endpoint = <&vopl_out_lvds>;
> + };
> + };
> +
> + lvds_out: port@1 {
> + reg = <1>;
> +
> + lvds_out_panel: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> + };
> --
> 2.7.4
>
>
