On Fri, Aug 18, 2017 at 04:14:45PM +0800, yinbo....@nxp.com wrote: > From: "yinbo.zhu" <yinbo....@nxp.com> > > Fix the issue that usb is not detected on ls1088ardb > > Signed-off-by: yinbo.zhu <yinbo....@nxp.com> > Signed-off-by: Ran Wang <ran.wan...@nxp.com>
You are sending an updated patch. Please have the version number in subject prefix ... > --- ... and a change history here. There are a lot of good examples on the list. Please have a check. > arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++ > arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 20 ++++++++++++++++++++ > 2 files changed, 28 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > index 213abb7..6c3c3bc 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > @@ -118,6 +118,14 @@ > status = "okay"; > }; > > +&usb0 { > + status = "okay"; > +}; > + > +&usb1 { > + status = "okay"; > +}; > + > &esdhc { > status = "okay"; > }; I had already put this on previous version - please sort these labelled nodes alphabetically. That said, &usb should go after &sata. Shawn