On (25/04/07 08:08), Randy Dunlap didst pronounce:
> On Tue, 24 Apr 2007 14:04:28 -0700 [EMAIL PROTECTED] wrote:
>
> >
> > The patch titled
> > Handle kernelcore= boot parameter in common code to avoid boot problem
> > on IA64
> > has been added to the -mm tree. Its filename is
> >
> > handle-kernelcore=-boot-parameter-in-common-code-to-avoid-boot-problem-on-ia64.patch
> >
> > *** Remember to use Documentation/SubmitChecklist when testing your code ***
> >
> > See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
> > out what to do about this
> >
> > ------------------------------------------------------
> > Subject: Handle kernelcore= boot parameter in common code to avoid boot
> > problem on IA64
> > From: Yasunori Goto <[EMAIL PROTECTED]>
> >
> > When "kernelcore" boot option is specified, kernel can't boot up on ia64
> > because of an infinite loop. In addition, the parsing code can be handled
> > in an architecture-independent manner.
>
> Is this boot option documented anywhere in the kernel source tree?
>
Documentation/kernel-parameters.txt
>
> > This patch patches uses common code to handle the kernelcore= parameter.
> > It is only available to architectures that support arch-independent
> > zone-sizing (i.e. define CONFIG_ARCH_POPULATES_NODE_MAP). Other
> > architectures will ignore the boot parameter.
> >
> > This effectively removes the following arch-specific patches;
> >
> > ia64-specify-amount-of-kernel-memory-at-boot-time.patch
> > ppc-and-powerpc-specify-amount-of-kernel-memory-at-boot-time.patch
> > x86_64-specify-amount-of-kernel-memory-at-boot-time.patch
> > x86-specify-amount-of-kernel-memory-at-boot-time.patch
> >
> > Signed-off-by: Yasunori Goto <[EMAIL PROTECTED]>
> > Signed-off-by: Mel Gorman <[EMAIL PROTECTED]>
> > Acked-by: Andy Whitcroft <[EMAIL PROTECTED]>
> > Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
> > ---
> >
> > arch/i386/kernel/setup.c | 1 -
> > arch/ia64/kernel/efi.c | 2 --
> > arch/powerpc/kernel/prom.c | 1 -
> > arch/ppc/mm/init.c | 2 --
> > arch/x86_64/kernel/e820.c | 1 -
> > include/linux/mm.h | 1 -
> > mm/page_alloc.c | 3 +++
> > 7 files changed, 3 insertions(+), 8 deletions(-)
> >
> > diff -puN
> > arch/i386/kernel/setup.c~handle-kernelcore=-boot-parameter-in-common-code-to-avoid-boot-problem-on-ia64
> > arch/i386/kernel/setup.c
> > ---
> > a/arch/i386/kernel/setup.c~handle-kernelcore=-boot-parameter-in-common-code-to-avoid-boot-problem-on-ia64
> > +++ a/arch/i386/kernel/setup.c
> > @@ -195,7 +195,6 @@ static int __init parse_mem(char *arg)
> > return 0;
> > }
> > early_param("mem", parse_mem);
> > -early_param("kernelcore", cmdline_parse_kernelcore);
> >
> > #ifdef CONFIG_PROC_VMCORE
> > /* elfcorehdr= specifies the location of elf core header
> > diff -puN
> > arch/ia64/kernel/efi.c~handle-kernelcore=-boot-parameter-in-common-code-to-avoid-boot-problem-on-ia64
> > arch/ia64/kernel/efi.c
> > ---
> > a/arch/ia64/kernel/efi.c~handle-kernelcore=-boot-parameter-in-common-code-to-avoid-boot-problem-on-ia64
> > +++ a/arch/ia64/kernel/efi.c
> > @@ -423,8 +423,6 @@ efi_init (void)
> > mem_limit = memparse(cp + 4, &cp);
> > } else if (memcmp(cp, "max_addr=", 9) == 0) {
> > max_addr = GRANULEROUNDDOWN(memparse(cp + 9, &cp));
> > - } else if (memcmp(cp, "kernelcore=",11) == 0) {
> > - cmdline_parse_kernelcore(cp+11);
> > } else if (memcmp(cp, "min_addr=", 9) == 0) {
> > min_addr = GRANULEROUNDDOWN(memparse(cp + 9, &cp));
> > } else {
> > diff -puN
> > arch/powerpc/kernel/prom.c~handle-kernelcore=-boot-parameter-in-common-code-to-avoid-boot-problem-on-ia64
> > arch/powerpc/kernel/prom.c
> > ---
> > a/arch/powerpc/kernel/prom.c~handle-kernelcore=-boot-parameter-in-common-code-to-avoid-boot-problem-on-ia64
> > +++ a/arch/powerpc/kernel/prom.c
> > @@ -432,7 +432,6 @@ static int __init early_parse_mem(char *
> > return 0;
> > }
> > early_param("mem", early_parse_mem);
> > -early_param("kernelcore", cmdline_parse_kernelcore);
> >
> > /*
> > * The device tree may be allocated below our memory limit, or inside the
> > diff -puN
> > arch/ppc/mm/init.c~handle-kernelcore=-boot-parameter-in-common-code-to-avoid-boot-problem-on-ia64
> > arch/ppc/mm/init.c
> > ---
> > a/arch/ppc/mm/init.c~handle-kernelcore=-boot-parameter-in-common-code-to-avoid-boot-problem-on-ia64
> > +++ a/arch/ppc/mm/init.c
> > @@ -214,8 +214,6 @@ void MMU_setup(void)
> > }
> > }
> >
> > -early_param("kernelcore", cmdline_parse_kernelcore);
> > -
> > /*
> > * MMU_init sets up the basic memory mappings for the kernel,
> > * including both RAM and possibly some I/O regions,
> > diff -puN
> > arch/x86_64/kernel/e820.c~handle-kernelcore=-boot-parameter-in-common-code-to-avoid-boot-problem-on-ia64
> > arch/x86_64/kernel/e820.c
> > ---
> > a/arch/x86_64/kernel/e820.c~handle-kernelcore=-boot-parameter-in-common-code-to-avoid-boot-problem-on-ia64
> > +++ a/arch/x86_64/kernel/e820.c
> > @@ -618,7 +618,6 @@ static int __init parse_memopt(char *p)
> > return 0;
> > }
> > early_param("mem", parse_memopt);
> > -early_param("kernelcore", cmdline_parse_kernelcore);
> >
> > static int userdef __initdata;
> >
> > diff -puN
> > include/linux/mm.h~handle-kernelcore=-boot-parameter-in-common-code-to-avoid-boot-problem-on-ia64
> > include/linux/mm.h
> > ---
> > a/include/linux/mm.h~handle-kernelcore=-boot-parameter-in-common-code-to-avoid-boot-problem-on-ia64
> > +++ a/include/linux/mm.h
> > @@ -988,7 +988,6 @@ extern unsigned long find_max_pfn_with_a
> > extern void free_bootmem_with_active_regions(int nid,
> > unsigned long max_low_pfn);
> > extern void sparse_memory_present_with_active_regions(int nid);
> > -extern int cmdline_parse_kernelcore(char *p);
> > #ifndef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
> > extern int early_pfn_to_nid(unsigned long pfn);
> > #endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
> > diff -puN
> > mm/page_alloc.c~handle-kernelcore=-boot-parameter-in-common-code-to-avoid-boot-problem-on-ia64
> > mm/page_alloc.c
> > ---
> > a/mm/page_alloc.c~handle-kernelcore=-boot-parameter-in-common-code-to-avoid-boot-problem-on-ia64
> > +++ a/mm/page_alloc.c
> > @@ -3542,6 +3542,9 @@ int __init cmdline_parse_kernelcore(char
> >
> > return 0;
> > }
> > +
> > +early_param("kernelcore", cmdline_parse_kernelcore);
> > +
> > #endif /* CONFIG_ARCH_POPULATES_NODE_MAP */
> >
> > /**
> > _
>
>
> ---
> ~Randy
> *** Remember to use Documentation/SubmitChecklist when testing your code ***
--
--
Mel Gorman
Part-time Phd Student Linux Technology Center
University of Limerick IBM Dublin Software Lab
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
