Hi Daniel, On Mon, Aug 21, 2017 at 12:06:17PM +0200, Daniel Lezcano wrote:
[...] > Hi Leo, > > a cleanest solution would be either: > > - add the 3 missing thermal sensors in the DT and default to the id 2 Yeah, so do you think below change works for you? ---8<--- ARM64: dts: hisilicon: add missed thermal sensors for Hi6220 The thermal driver tries to register four sensors but the DT only binds one sensor (sensor ID 2) with thermal zone, as result the thermal driver reports failure for missed thermal sensor binding. This patch adds missed thermal sensor for Hi6220, so can dismiss the booting failure log. diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index eacbe0d..44c2bc7 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -833,6 +833,18 @@ thermal-zones { + local: local { + polling-delay = <0>; + polling-delay-passive = <0>; + thermal-sensors = <&tsensor 0>; + }; + + cls1: cls1 { + polling-delay = <0>; + polling-delay-passive = <0>; + thermal-sensors = <&tsensor 1>; + }; + cls0: cls0 { polling-delay = <1000>; polling-delay-passive = <100>; @@ -862,6 +874,12 @@ }; }; }; + + gpu: gpu { + polling-delay = <0>; + polling-delay-passive = <0>; + thermal-sensors = <&tsensor 3>; + }; }; > or > > - remove all the code assuming 4 sensors and deal with the one unique > sensor I personally prefer to avoid doing this, if only register one unique sensor this will let us have no flexiblity for trying multiple sensors on this platform. [...] Thanks, Leo Yan