This patch add Document for Rockchip Soc RK3288 LVDS,
This based on the patches from Mark yao and Heiko Stuebner.
Signed-off-by: Sandy Huang <h...@rock-chips.com>
Signed-off-by: Mark yao <mark....@rock-chips.com>
Signed-off-by: Heiko Stuebner <he...@sntech.de>
---
Changes according to Rob Herring's review.
.../bindings/display/rockchip/rockchip-lvds.txt | 99 ++++++++++++++++++++++
1 file changed, 99 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
diff --git
a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
new file mode 100644
index 0000000..da6939e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
@@ -0,0 +1,99 @@
+Rockchip RK3288 LVDS interface
+================================
+
+Required properties:
+- compatible: matching the soc type, one of
+ - "rockchip,rk3288-lvds";
+
+- reg: physical base address of the controller and length
+ of memory mapped region.
+- clocks: must include clock specifiers corresponding to entries in the
+ clock-names property.
+- clock-names: must contain "pclk_lvds"
+
+- avdd1v0-supply: regulator phandle for 1.0V analog power
+- avdd1v8-supply: regulator phandle for 1.8V analog power
+- avdd3v3-supply: regulator phandle for 3.3V analog power
+
+- rockchip,grf: phandle to the general register files syscon
+- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output
interface
+
+Optional properties:
+- pinctrl-names: must contain a "lcdc" entry.
+- pinctrl-0: pin control group to be used for this controller.
+
+Required nodes:
+
+The lvds has two video ports as described by
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+Their connections are modeled using the OF graph bindings specified in
+ Documentation/devicetree/bindings/graph.txt.
+
+- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
+- video port 1 for either a panel or subsequent encoder
+
+the lvds panel described by
+ Documentation/devicetree/bindings/display/panel/simple-panel.txt
+
+Panel required properties:
+- ports for remote LVDS output
+
+Panel optional properties:
+- data-mapping: should be "vesa-24","jeida-24" or "jeida-18".
+This describes decribed by:
+ Documentation/devicetree/bindings/display/panel/panel-lvds.txt
+
+Example:
+
+lvds_panel: lvds-panel {
+ compatible = "auo,b101ean01";
+ enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+ data-mapping = "jeida-24";
+
+ ports {
+ panel_in_lvds: endpoint {
+ remote-endpoint = <&lvds_out_panel>;
+ };
+ };
+};
+
+For Rockchip RK3288:
+
+ lvds: lvds@ff96c000 {
+ compatible = "rockchip,rk3288-lvds";
+ rockchip,grf = <&grf>;
+ reg = <0xff96c000 0x4000>;
+ clocks = <&cru PCLK_LVDS_PHY>;
+ clock-names = "pclk_lvds";
+ pinctrl-names = "lcdc";
+ pinctrl-0 = <&lcdc_ctl>;
+ avdd1v0-supply = <&vdd10_lcd>;
+ avdd1v8-supply = <&vcc18_lcd>;
+ avdd3v3-supply = <&vcca_33>;
+ rockchip,output = "rgb";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lvds_in: port@0 {
+ reg = <0>;
+
+ lvds_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_lvds>;
+ };
+ lvds_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_lvds>;
+ };
+ };
+
+ lvds_out: port@1 {
+ reg = <1>;
+
+ lvds_out_panel: endpoint {
+ remote-endpoint = <&panel_in_lvds>;
+ };
+ };
+ };
+ };
--
2.7.4
