Hello, I've a machine that has been installed with Intel Soft Raid on top of 2 SATA disks. I'm trying to have this work as a RAID-1 array. Bios configuration has been done, using 128K chunk, and the kernel (2.6.20.7) sees perfectly /dev/mapper/isw_xxxxxxxx_RAID1
But, I'm facing two problems : 1 - If i try to create partitions on this device, it does fail (the values are not interpreted correctly) 2 - To avoid 1), I stop the RAID array (dmraid -an), then I do create exactly the same partition set on /dev/sda, and /dev/sdb, and then I reactivate RAID (dmraid -ay). This allows me to see all the /dev/mapper/isw_xxxxxxx_RAID1p1, p2, ... But, running fsck -t ext2 /dev/mapper/isw_xxxxxxx_RAID1p1 ends in a lock when the partition is larger than 10Go (well, it is Ok on the 10Go one, and it locks on the 100Go). Not a real hardlock, I still can switch to a new VC, but it's not more possible to start a new command or to stop fsck. Should I do everything on the physical disks before activating RAID ? Is it a normal behavior ? BTW, I also noticed that such a device doesn't support BLKRRPART ioctl... So it is possible that what I'm doing is wrong... Any idea ? Regards, Paul - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/