Hi Takashi,
On Tue, Aug 22, 2017 at 07:57:09AM +0200, Takashi Iwai wrote:
> This provides a new input driver for supporting the power button on
> Dollar Cove TI PMIC, found on Cherrytrail-based devices.
> The patch is based on the original work by Intel, found at:
> https://github.com/01org/ProductionKernelQuilts
>
> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=193891
> Signed-off-by: Takashi Iwai <ti...@suse.de>
> ---
> drivers/input/keyboard/Kconfig | 7 +++
> drivers/input/keyboard/Makefile | 1 +
> drivers/input/keyboard/dc_ti_pwrbtn.c | 85
> +++++++++++++++++++++++++++++++++++
Not sure if it ends up in drivers/input/keyboard, or drivers/input/misc/
(where most power buttons live) or in platform drivers, still a few
comments below.
> 3 files changed, 93 insertions(+)
> create mode 100644 drivers/input/keyboard/dc_ti_pwrbtn.c
>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 4c4ab1ced235..673748b3cc34 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -756,4 +756,11 @@ config KEYBOARD_BCM
> To compile this driver as a module, choose M here: the
> module will be called bcm-keypad.
>
> +config KEYBOARD_DC_TI_PWRBTN
> + tristate "Dollar Cove TI power button driver"
> + depends on INTEL_SOC_PMIC_DC_TI
> + help
> + Say Y here fi you want to have a power button driver for
> + Dollar Cove TI PMIC.
If keeping in input we customarily call out the module name (see a few
lines above).
> +
> endif
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index d2338bacdad1..fa473d241e5c 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -66,3 +66,4 @@ obj-$(CONFIG_KEYBOARD_TM2_TOUCHKEY) += tm2-touchkey.o
> obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o
> obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
> obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o
> +obj-$(CONFIG_KEYBOARD_DC_TI_PWRBTN) += dc_ti_pwrbtn.o
> diff --git a/drivers/input/keyboard/dc_ti_pwrbtn.c
> b/drivers/input/keyboard/dc_ti_pwrbtn.c
> new file mode 100644
> index 000000000000..a0900a440c92
> --- /dev/null
> +++ b/drivers/input/keyboard/dc_ti_pwrbtn.c
> @@ -0,0 +1,85 @@
> +/*
> + * Power button driver for Dollar Cove TI PMIC
> + * Copyright (C) 2014 Intel Corp
> + * Copyright (c) 2017 Takashi Iwai <ti...@suse.de>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/slab.h>
> +#include <linux/device.h>
> +#include <linux/platform_device.h>
> +#include <linux/input.h>
> +#include <linux/mfd/intel_soc_pmic.h>
> +
> +#define DC_TI_SIRQ_REG 0x3
> +#define SIRQ_PWRBTN_REL (1 << 0)
BIT()?
> +
> +#define DRIVER_NAME "dc_ti_pwrbtn"
> +
> +static irqreturn_t dc_ti_pwrbtn_interrupt(int irq, void *dev_id)
> +{
> + struct input_dev *pwrbtn_input = dev_id;
> + struct device *dev = pwrbtn_input->dev.parent;
> + struct regmap *regmap = dev_get_drvdata(dev);
> + int state;
> +
> + if (!regmap_read(regmap, DC_TI_SIRQ_REG, &state)) {
> + dev_dbg(dev, "SIRQ_REG=0x%x\n", state);
> + state &= SIRQ_PWRBTN_REL;
> + input_event(pwrbtn_input, EV_KEY, KEY_POWER, !state);
Why not
input_report_key(pwrbtn_input, KEY_POWER,
!(state & SIRQ_PWRBTN_REL));
> + input_sync(pwrbtn_input);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int dc_ti_pwrbtn_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent);
> + struct input_dev *pwrbtn_input;
> + int irq;
> + int ret;
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0)
> + return -EINVAL;
Why do you clobber return value? Simply return "irq".
> + pwrbtn_input = devm_input_allocate_device(dev);
> + if (!pwrbtn_input)
> + return -ENOMEM;
> + pwrbtn_input->name = pdev->name;
> + pwrbtn_input->phys = "dc-ti-power/input0";
> + pwrbtn_input->id.bustype = BUS_HOST;
> + pwrbtn_input->dev.parent = dev;
Not needed since devm_input_allocate_device() does it for us.
> + input_set_capability(pwrbtn_input, EV_KEY, KEY_POWER);
> + ret = input_register_device(pwrbtn_input);
> + if (ret)
> + return ret;
If staying in input, can we please call this variable err or error?
> +
> + dev_set_drvdata(dev, pmic->regmap);
> +
> + ret = devm_request_threaded_irq(dev, irq, NULL, dc_ti_pwrbtn_interrupt,
> + 0, KBUILD_MODNAME, pwrbtn_input);
> + if (ret)
> + return ret;
> +
> + ret = enable_irq_wake(irq);
> + if (ret)
> + dev_warn(dev, "Can't enable IRQ as wake source: %d\n", ret);
We do not normally enable wake IRQs in probe, but instead do:
device_init_wakeup(&pdev->dev, true);
in probe() and then check it in suspend/resume:
if (device_may_wakeup(dev)) {
err = enable_irq_wake(XXX->irq);
if (!err)
XXX->irq_wake_enabled = true;
}
...
if (XXX->irq_wake_enabled)
disable_irq_wake(XXX->irq);
This allows userspace to inhibit wakeup, if needed.
> +
> + return 0;
> +}
> +
> +static struct platform_driver dc_ti_pwrbtn_driver = {
> + .driver = {
> + .name = DRIVER_NAME,
> + },
> + .probe = dc_ti_pwrbtn_probe,
> +};
> +
> +module_platform_driver(dc_ti_pwrbtn_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:" DRIVER_NAME);
> --
> 2.14.0
>
Thanks!
--
Dmitry
