From: Ondrej Jirman <meg...@megous.com>
[ Upstream commit a43c96427e713bea94e9ef50e8be1f493afc0691 ]
When adjusting PLL_CPUX on H3, the PLL is temporarily driven
too high, and the system becomes unstable (oopses or hangs).
Add a notifier to avoid this situation by temporarily switching
to a known stable 24 MHz oscillator.
Signed-off-by: Ondrej Jirman <meg...@megous.com>
Tested-by: Lutz Sammer <john...@gmx.net>
Acked-by: Chen-Yu Tsai <w...@csie.org>
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.le...@verizon.com>
---
drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
index 21c427d86f28..a26c8a19fe93 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
@@ -803,6 +803,13 @@ static const struct sunxi_ccu_desc sun8i_h3_ccu_desc = {
.num_resets = ARRAY_SIZE(sun8i_h3_ccu_resets),
};
+static struct ccu_mux_nb sun8i_h3_cpu_nb = {
+ .common = &cpux_clk.common,
+ .cm = &cpux_clk.mux,
+ .delay_us = 1, /* > 8 clock cycles at 24 MHz */
+ .bypass_index = 1, /* index of 24 MHz oscillator */
+};
+
static void __init sun8i_h3_ccu_setup(struct device_node *node)
{
void __iomem *reg;
@@ -821,6 +828,9 @@ static void __init sun8i_h3_ccu_setup(struct device_node
*node)
writel(val | (3 << 16), reg + SUN8I_H3_PLL_AUDIO_REG);
sunxi_ccu_probe(node, reg, &sun8i_h3_ccu_desc);
+
+ ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
+ &sun8i_h3_cpu_nb);
}
CLK_OF_DECLARE(sun8i_h3_ccu, "allwinner,sun8i-h3-ccu",
sun8i_h3_ccu_setup);
--
2.11.0
