USB2517i hubs are very like USB251xb devices series. They have almost
the same configuration registers space except number of ports, led
configurations and lack of battery settings. All these peculiarities
are reflected in this patch.
Signed-off-by: Serge Semin <fancer.lan...@gmail.com>
---
Documentation/devicetree/bindings/usb/usb251xb.txt | 4 +-
drivers/usb/misc/usb251xb.c | 84 +++++++++++++++++++---
2 files changed, 78 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt
b/Documentation/devicetree/bindings/usb/usb251xb.txt
index 3957d4eda..3d84626d3 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
@@ -6,7 +6,8 @@ Hi-Speed Controller.
Required properties :
- compatible : Should be "microchip,usb251xb" or one of the specific types:
"microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b",
- "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi"
+ "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi",
+ "microchip,usb2517", "microchip,usb2517i"
- reset-gpios : Should specify the gpio for hub reset
- reg : I2C address on the selected bus (default is <0x2C>)
@@ -36,6 +37,7 @@ Optional properties :
an invalid value is given, the default is used instead.
- compound-device : indicate the hub is part of a compound device
- port-mapping-mode : enable port mapping mode
+ - speed-led-mode : led speed indiation mode selection (usb2517 only)
- string-support : enable string descriptor support (required for
manufacturer,
product and serial string configuration)
- non-removable-ports : Should specify the ports which have a non-removable
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 91f66d68b..2ef22758c 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -38,6 +38,7 @@
#define USB251XB_DEF_PRODUCT_ID_12 0x2512 /* USB2512B/12Bi */
#define USB251XB_DEF_PRODUCT_ID_13 0x2513 /* USB2513B/13Bi */
#define USB251XB_DEF_PRODUCT_ID_14 0x2514 /* USB2514B/14Bi */
+#define USB251XB_DEF_PRODUCT_ID_17 0x2517 /* USB2517i */
#define USB251XB_ADDR_DEVICE_ID_LSB 0x04
#define USB251XB_ADDR_DEVICE_ID_MSB 0x05
@@ -48,7 +49,7 @@
#define USB251XB_ADDR_CONFIG_DATA_2 0x07
#define USB251XB_DEF_CONFIG_DATA_2 0x20
#define USB251XB_ADDR_CONFIG_DATA_3 0x08
-#define USB251XB_DEF_CONFIG_DATA_3 0x02
+#define USB251XB_DEF_CONFIG_DATA_3 0x00
#define USB251XB_ADDR_NON_REMOVABLE_DEVICES 0x09
#define USB251XB_DEF_NON_REMOVABLE_DEVICES 0x00
@@ -82,7 +83,7 @@
#define USB251XB_ADDR_PRODUCT_STRING_LEN 0x14
#define USB251XB_ADDR_PRODUCT_STRING 0x54
-#define USB251XB_DEF_PRODUCT_STRING "USB251xB/xBi"
+#define USB251XB_DEF_PRODUCT_STRING "USB251xB/xBi/7i"
#define USB251XB_ADDR_SERIAL_STRING_LEN 0x15
#define USB251XB_ADDR_SERIAL_STRING 0x92
@@ -93,8 +94,10 @@
#define USB251XB_ADDR_BOOST_UP 0xF6
#define USB251XB_DEF_BOOST_UP 0x00
-#define USB251XB_ADDR_BOOST_X 0xF8
-#define USB251XB_DEF_BOOST_X 0x00
+#define USB251XB_ADDR_BOOST_57 0xF8
+#define USB251XB_DEF_BOOST_57 0x00
+#define USB251XB_ADDR_BOOST_14 0xF8
+#define USB251XB_DEF_BOOST_14 0x00
#define USB251XB_ADDR_PORT_SWAP 0xFA
#define USB251XB_DEF_PORT_SWAP 0x00
@@ -102,7 +105,11 @@
#define USB251XB_ADDR_PORT_MAP_12 0xFB
#define USB251XB_DEF_PORT_MAP_12 0x00
#define USB251XB_ADDR_PORT_MAP_34 0xFC
-#define USB251XB_DEF_PORT_MAP_34 0x00 /* USB2513B/i & USB2514B/i only */
+#define USB251XB_DEF_PORT_MAP_34 0x00 /* USB251{3B/i,4B/i,7/i} only */
+#define USB251XB_ADDR_PORT_MAP_56 0xFD
+#define USB251XB_DEF_PORT_MAP_56 0x00 /* USB2517/i only */
+#define USB251XB_ADDR_PORT_MAP_7 0xFE
+#define USB251XB_DEF_PORT_MAP_7 0x00 /* USB2517/i only */
#define USB251XB_ADDR_STATUS_COMMAND 0xFF
#define USB251XB_STATUS_COMMAND_SMBUS_DOWN 0x04
@@ -144,48 +151,88 @@ struct usb251xb {
char serial[USB251XB_STRING_BUFSIZE];
u8 bat_charge_en;
u8 boost_up;
- u8 boost_x;
+ u8 boost_57;
+ u8 boost_14;
u8 port_swap;
u8 port_map12;
u8 port_map34;
+ u8 port_map56;
+ u8 port_map7;
u8 status;
};
struct usb251xb_data {
u16 product_id;
+ u8 port_cnt;
+ bool led_support;
+ bool bat_support;
char product_str[USB251XB_STRING_BUFSIZE / 2]; /* ASCII string */
};
static const struct usb251xb_data usb2512b_data = {
.product_id = 0x2512,
+ .port_cnt = 2,
+ .led_support = false,
+ .bat_support = true,
.product_str = "USB2512B",
};
static const struct usb251xb_data usb2512bi_data = {
.product_id = 0x2512,
+ .port_cnt = 2,
+ .led_support = false,
+ .bat_support = true,
.product_str = "USB2512Bi",
};
static const struct usb251xb_data usb2513b_data = {
.product_id = 0x2513,
+ .port_cnt = 3,
+ .led_support = false,
+ .bat_support = true,
.product_str = "USB2513B",
};
static const struct usb251xb_data usb2513bi_data = {
.product_id = 0x2513,
+ .port_cnt = 3,
+ .led_support = false,
+ .bat_support = true,
.product_str = "USB2513Bi",
};
static const struct usb251xb_data usb2514b_data = {
.product_id = 0x2514,
+ .port_cnt = 4,
+ .led_support = false,
+ .bat_support = true,
.product_str = "USB2514B",
};
static const struct usb251xb_data usb2514bi_data = {
.product_id = 0x2514,
+ .port_cnt = 4,
+ .led_support = false,
+ .bat_support = true,
.product_str = "USB2514Bi",
};
+static const struct usb251xb_data usb2517_data = {
+ .product_id = 0x2517,
+ .port_cnt = 7,
+ .led_support = true,
+ .bat_support = false,
+ .product_str = "USB2517",
+};
+
+static const struct usb251xb_data usb2517i_data = {
+ .product_id = 0x2517,
+ .port_cnt = 7,
+ .led_support = true,
+ .bat_support = false,
+ .product_str = "USB2517i",
+};
+
static void usb251xb_reset(struct usb251xb *hub, int state)
{
if (!gpio_is_valid(hub->gpio_reset))
@@ -254,10 +301,13 @@ static int usb251xb_connect(struct usb251xb *hub)
USB251XB_STRING_BUFSIZE);
i2c_wb[USB251XB_ADDR_BATTERY_CHARGING_ENABLE] = hub->bat_charge_en;
i2c_wb[USB251XB_ADDR_BOOST_UP] = hub->boost_up;
- i2c_wb[USB251XB_ADDR_BOOST_X] = hub->boost_x;
+ i2c_wb[USB251XB_ADDR_BOOST_57] = hub->boost_57;
+ i2c_wb[USB251XB_ADDR_BOOST_14] = hub->boost_14;
i2c_wb[USB251XB_ADDR_PORT_SWAP] = hub->port_swap;
i2c_wb[USB251XB_ADDR_PORT_MAP_12] = hub->port_map12;
i2c_wb[USB251XB_ADDR_PORT_MAP_34] = hub->port_map34;
+ i2c_wb[USB251XB_ADDR_PORT_MAP_56] = hub->port_map56;
+ i2c_wb[USB251XB_ADDR_PORT_MAP_7] = hub->port_map7;
i2c_wb[USB251XB_ADDR_STATUS_COMMAND] = USB251XB_STATUS_COMMAND_ATTACH;
usb251xb_reset(hub, 1);
@@ -402,6 +452,9 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
if (of_get_property(np, "port-mapping-mode", NULL))
hub->conf_data3 |= BIT(3);
+ if (data->led_support && of_get_property(np, "speed-led-mode", NULL))
+ hub->conf_data3 |= BIT(1);
+
if (of_get_property(np, "string-support", NULL))
hub->conf_data3 |= BIT(0);
@@ -411,8 +464,10 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
for (i = 0; i < len / sizeof(u32); i++) {
u32 port = be32_to_cpu(cproperty_u32[i]);
- if ((port >= 1) && (port <= 4))
+ if ((port >= 1) && (port <= data->port_cnt))
hub->non_rem_dev |= BIT(port);
+ else
+ dev_warn(dev, "port %u doesn't exist\n", port);
}
}
@@ -483,10 +538,13 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS;
hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE;
hub->boost_up = USB251XB_DEF_BOOST_UP;
- hub->boost_x = USB251XB_DEF_BOOST_X;
+ hub->boost_57 = USB251XB_DEF_BOOST_57;
+ hub->boost_14 = USB251XB_DEF_BOOST_14;
hub->port_swap = USB251XB_DEF_PORT_SWAP;
hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
hub->port_map34 = USB251XB_DEF_PORT_MAP_34;
+ hub->port_map56 = USB251XB_DEF_PORT_MAP_56;
+ hub->port_map7 = USB251XB_DEF_PORT_MAP_7;
return 0;
}
@@ -511,6 +569,12 @@ static const struct of_device_id usb251xb_of_match[] = {
.compatible = "microchip,usb2514bi",
.data = &usb2514bi_data,
}, {
+ .compatible = "microchip,usb2517",
+ .data = &usb2517_data,
+ }, {
+ .compatible = "microchip,usb2517i",
+ .data = &usb2517i_data,
+ }, {
/* sentinel */
}
};
@@ -574,6 +638,8 @@ static const struct i2c_device_id usb251xb_id[] = {
{ "usb2513bi", 0 },
{ "usb2514b", 0 },
{ "usb2514bi", 0 },
+ { "usb2517", 0 },
+ { "usb2517i", 0 },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(i2c, usb251xb_id);
--
2.12.0
