Dear all,

Please ignore this patch. It has some problem.
I'll fix and resend this patch on v2.

Chanwoo Choi
Samsung Electronics

On 2017년 09월 21일 09:33, Chanwoo Choi wrote:
> This patch registers the Exynos Bus-Frequency scaling device
> as a cooling device of thermal management.
> 
> Signed-off-by: Chanwoo Choi <[email protected]>
> Cc: Kukjin Kim <[email protected]>
> Cc: Krzysztof Kozlowski <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> ---
>  drivers/devfreq/Kconfig      |  1 +
>  drivers/devfreq/exynos-bus.c | 11 +++++++++++
>  2 files changed, 12 insertions(+)
> 
> diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
> index 6a172d338f6d..eb8128e08b2c 100644
> --- a/drivers/devfreq/Kconfig
> +++ b/drivers/devfreq/Kconfig
> @@ -81,6 +81,7 @@ config ARM_EXYNOS_BUS_DEVFREQ
>       select DEVFREQ_GOV_SIMPLE_ONDEMAND
>       select DEVFREQ_GOV_PASSIVE
>       select DEVFREQ_EVENT_EXYNOS_PPMU
> +     select DEVFREQ_THERMAL
>       select PM_DEVFREQ_EVENT
>       select PM_OPP
>       help
> diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
> index c25658b26598..200ca0d11834 100644
> --- a/drivers/devfreq/exynos-bus.c
> +++ b/drivers/devfreq/exynos-bus.c
> @@ -15,6 +15,7 @@
>  #include <linux/clk.h>
>  #include <linux/devfreq.h>
>  #include <linux/devfreq-event.h>
> +#include <linux/devfreq_cooling.h>
>  #include <linux/device.h>
>  #include <linux/export.h>
>  #include <linux/module.h>
> @@ -41,6 +42,8 @@ struct exynos_bus {
>       struct clk *clk;
>       unsigned int voltage_tolerance;
>       unsigned int ratio;
> +
> +     struct thermal_cooling_device *cdev;
>  };
>  
>  /*
> @@ -468,6 +471,14 @@ static int exynos_bus_probe(struct platform_device *pdev)
>               goto err;
>       }
>  
> +     /* Register devfreq cooling device */
> +     bus->cdev = of_devfreq_cooling_register(np, bus->devfreq);
> +     if (IS_ERR(bus->cdev) < 0) {
> +             dev_err(dev, "failed to register cooling device\n");
> +             ret = PTR_ERR(bus->cdev);
> +             goto err;
> +     }
> +
>       goto out;
>  passive:
>       /* Initialize the struct profile and governor data for passive device */
> 



Reply via email to