On Thu, Apr 26, 2007 at 08:24:05AM -0700, Andrew Morton wrote: > On Thu, 26 Apr 2007 15:06:20 +0530 Vivek Goyal <[EMAIL PROTECTED]> wrote: > > > Hi, > > > > I am booting 2.6.21-rc7-mm2 on x86_64 box with "irqpoll" command line option > > and it panics. I can reproduce this problem easily on this box. Please > > let me know if serial console output is required. > > > > 2.6.21-rc7 works just fine. So problem seems to be in some -mm patch. > > > > Unable to handle kernel NULL pointer dereference at 0000000000000009 RIP: > > [<ffffffff8025bc5e>] note_interrupt+0x5d/0x21b > > PGD 1032c5067 PUD 1032c4067 PMD 0 > > Oops: 0000 [1] SMP > > CPU 1 > > Modules linked in: > > Pid: 0, comm: swapper Not tainted 2.6.21-rc7-mm2 #1 > > RIP: 0010:[<ffffffff8025bc5e>] [<ffffffff8025bc5e>] > > note_interrupt+0x5d/0x21b > > RSP: 0018:ffff810100cbff08 EFLAGS: 00010002 > > RAX: 0000000000000000 RBX: ffffffff807e2d40 RCX: 0000000000000000 > > RDX: 0000000000000000 RSI: ffffffff807e2d40 RDI: 0000000000000004 > > RBP: ffffffff807e2d40 R08: 0000000000000000 R09: 0000000000000000 > > R10: 0000000000000010 R11: 00000000000000a0 R12: ffff810104192f40 > > R13: ffffffff807e2d84 R14: 0000000000000000 R15: 0000000000000000 > > FS: 0000000000000000(0000) GS:ffff810100854140(0000) knlGS:0000000000000000 > > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b > > CR2: 0000000000000009 CR3: 00000001032c6000 CR4: 00000000000006e0 > > Process swapper (pid: 0, threadinfo ffff810100cb8000, task ffff810100cb7500) > > Stack: 0000000000000004 0000000400000000 0000000000000000 ffffffff807e2d40 > > 0000000000000004 ffff810104192f40 ffffffff807e2d84 0000000000000000 > > 0000000000000000 ffffffff8025c7c5 ffff810100cb9e98 ffff810100cb9e98 > > Call Trace: > > [<ffffffff8025c7c5>] handle_edge_irq+0xf9/0x127 > > [<ffffffff8020c2f9>] do_IRQ+0xf1/0x160 > > [<ffffffff8020a141>] ret_from_intr+0x0/0xa > > [<ffffffff80208fd9>] mwait_idle+0x42/0x45 > > [<ffffffff80208f2f>] cpu_idle+0xbd/0xe0 > > > > > > Code: f6 40 09 10 75 09 45 85 ff 0f 85 3d 01 00 00 49 c7 c4 c0 2b > > RIP [<ffffffff8025bc5e>] note_interrupt+0x5d/0x21b > > RSP <ffff810100cbff08> > > CR2: 0000000000000009 > > Kernel panic - not syncing: Aiee, killing interrupt handler! > > > > hm. I'd be suspecting > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc7/2.6.21-rc7-mm2/broken-out/add-irqf_irqpoll-flag-common-code.patch > and > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc7/2.6.21-rc7-mm2/broken-out/add-irqf_irqpoll-flag-on-x86_64.patch > > But because x86_64 doesn't implement IRQ_PER_CPU it's hard to see how we > got into note_interrupt as a result of that patch. > > Adding the `noirqdebug' boot option would be interesting, perhaps.
"noirqdebug" gets rid of the problem. But that also effectively nullifies "irqpoll" parameter. Interestingly on another x86_64 machine this problem does not occur. So something is dependent on hardware. I put some debug statements on note_interrupt() and found that desc->action is a NULL pointer and that's why the problem. Above patch acesses desc->action->flags, hence it ends up accessing a NULL pointer. handle_edge_irq() already makes sure that desc->action is not null, still note_interrupt() is receiving desc->action as null, that's strange. On my system this is happening for irq 4 and /proc/interrupt shows that it is coming from "serial". Thanks Vivek - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/