CONFIG_SOUND, CONFIG_SND, CONFIG_SOUND_PRIME, ...:
Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.
CONFIG_SND_*_DRIVERS:
Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",
so that the user can disable all the options in that menu at once
instead of having to disable each option separately.
CONFIG_SOUND_KAHULA:
Move it so that it appears correctly in menuconfig.
Signed-off-by: Jan Engelhardt <[EMAIL PROTECTED]>
---
sound/Kconfig | 30 +++++++++-----------
sound/aoa/Kconfig | 11 ++++---
sound/arm/Kconfig | 16 ++++++----
sound/core/Kconfig | 18 ++----------
sound/drivers/Kconfig | 20 ++++++-------
sound/isa/Kconfig | 45 +++++++++---------------------
sound/mips/Kconfig | 13 +++++---
sound/oss/Kconfig | 29 ++++++-------------
sound/parisc/Kconfig | 11 ++++---
sound/pci/Kconfig | 70 ++++++-----------------------------------------
sound/pcmcia/Kconfig | 12 ++++----
sound/ppc/Kconfig | 16 ++++++----
sound/soc/Kconfig | 10 ++++--
sound/soc/codecs/Kconfig | 9 ++----
sound/sparc/Kconfig | 15 ++++++----
sound/usb/Kconfig | 15 +++++-----
16 files changed, 136 insertions(+), 204 deletions(-)
--- linux-2.6.21-mm_20070428.orig/sound/Kconfig
+++ linux-2.6.21-mm_20070428/sound/Kconfig
@@ -1,9 +1,7 @@
# sound/Config.in
#
-menu "Sound"
-
-config SOUND
+menuconfig SOUND
tristate "Sound card support"
help
If you have a sound card in your computer, i.e. if it can say more
@@ -32,14 +30,13 @@ config SOUND
Kernel patches and supporting utilities to do that are in the pcsp
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+if SOUND
+
source "sound/oss/dmasound/Kconfig"
if !M68K
-menu "Advanced Linux Sound Architecture"
- depends on SOUND!=n
-
-config SND
+menuconfig SND
tristate "Advanced Linux Sound Architecture"
depends on SOUND
help
@@ -48,6 +45,8 @@ config SND
For more information, see <http://www.alsa-project.org/>
+if SND
+
source "sound/core/Kconfig"
source "sound/drivers/Kconfig"
@@ -78,22 +77,23 @@ source "sound/parisc/Kconfig"
source "sound/soc/Kconfig"
-endmenu
+endif # SND
-menu "Open Sound System"
- depends on SOUND!=n
-
-config SOUND_PRIME
+menuconfig SOUND_PRIME
tristate "Open Sound System (DEPRECATED)"
depends on SOUND
help
Say 'Y' or 'M' to enable Open Sound System drivers.
+if SOUND_PRIME
+
source "sound/oss/Kconfig"
-endmenu
+endif # SOUND_PRIME
-endif
+endif # !M68K
+
+endif # SOUND
config AC97_BUS
tristate
@@ -102,5 +102,3 @@ config AC97_BUS
sound subsystem and other function drivers completely unrelated to
sound although they're sharing the AC97 bus. Concerned drivers
should "select" this.
-
-endmenu
--- linux-2.6.21-mm_20070428.orig/sound/aoa/Kconfig
+++ linux-2.6.21-mm_20070428/sound/aoa/Kconfig
@@ -1,9 +1,12 @@
-menu "Apple Onboard Audio driver"
- depends on SND!=n && PPC_PMAC
+menuconfig SND_AOA_DRIVERS
+ bool "Apple Onboard Audio driver"
+ depends on PPC_PMAC
+ default y
+
+if SND_AOA_DRIVERS
config SND_AOA
tristate "Apple Onboard Audio driver"
- depends on SND
select SND_PCM
---help---
This option enables the new driver for the various
@@ -15,4 +18,4 @@ source "sound/aoa/codecs/Kconfig"
source "sound/aoa/soundbus/Kconfig"
-endmenu
+endif # SND_AOA_DRIVERS
--- linux-2.6.21-mm_20070428.orig/sound/arm/Kconfig
+++ linux-2.6.21-mm_20070428/sound/arm/Kconfig
@@ -1,11 +1,15 @@
# ALSA ARM drivers
-menu "ALSA ARM devices"
- depends on SND!=n && ARM
+menuconfig SND_ARM_DRIVERS
+ bool "ALSA ARM devices"
+ depends on ARM
+ default y
+
+if SND_ARM_DRIVERS
config SND_SA11XX_UDA1341
tristate "SA11xx UDA1341TS driver (iPaq H3600)"
- depends on ARCH_SA1100 && SND && L3
+ depends on ARCH_SA1100 && L3
select SND_PCM
help
Say Y here if you have a Compaq iPaq H3x00 handheld computer
@@ -16,7 +20,7 @@ config SND_SA11XX_UDA1341
config SND_ARMAACI
tristate "ARM PrimeCell PL041 AC Link support"
- depends on SND && ARM_AMBA
+ depends on ARM_AMBA
select SND_PCM
select SND_AC97_CODEC
@@ -26,11 +30,11 @@ config SND_PXA2XX_PCM
config SND_PXA2XX_AC97
tristate "AC97 driver for the Intel PXA2xx chip"
- depends on ARCH_PXA && SND
+ depends on ARCH_PXA
select SND_PXA2XX_PCM
select SND_AC97_CODEC
help
Say Y or M if you want to support any AC97 codec attached to
the PXA2xx AC97 interface.
-endmenu
+endif # SND_ARM_DRIVERS
--- linux-2.6.21-mm_20070428.orig/sound/core/Kconfig
+++ linux-2.6.21-mm_20070428/sound/core/Kconfig
@@ -1,24 +1,19 @@
# ALSA soundcard-configuration
config SND_TIMER
tristate
- depends on SND
config SND_PCM
tristate
select SND_TIMER
- depends on SND
config SND_HWDEP
tristate
- depends on SND
config SND_RAWMIDI
tristate
- depends on SND
config SND_SEQUENCER
tristate "Sequencer support"
- depends on SND
select SND_TIMER
help
Say Y or M to enable MIDI sequencer and router support. This
@@ -44,11 +39,9 @@ config SND_SEQ_DUMMY
config SND_OSSEMUL
bool
- depends on SND
config SND_MIXER_OSS
tristate "OSS Mixer API"
- depends on SND
select SND_OSSEMUL
help
To enable OSS mixer API emulation (/dev/mixer*), say Y here
@@ -61,7 +54,6 @@ config SND_MIXER_OSS
config SND_PCM_OSS
tristate "OSS PCM (digital audio) API"
- depends on SND
select SND_OSSEMUL
select SND_PCM
help
@@ -84,7 +76,7 @@ config SND_PCM_OSS_PLUGINS
config SND_SEQUENCER_OSS
bool "OSS Sequencer API"
- depends on SND && SND_SEQUENCER
+ depends on SND_SEQUENCER
select SND_OSSEMUL
help
Say Y here to enable OSS sequencer emulation (both
@@ -98,7 +90,7 @@ config SND_SEQUENCER_OSS
config SND_RTCTIMER
tristate "RTC Timer support"
- depends on SND && RTC
+ depends on RTC
select SND_TIMER
help
Say Y here to enable RTC timer support for ALSA. ALSA uses
@@ -123,7 +115,6 @@ config SND_SEQ_RTCTIMER_DEFAULT
config SND_DYNAMIC_MINORS
bool "Dynamic device file minor numbers"
- depends on SND
help
If you say Y here, the minor numbers of ALSA device files in
/dev/snd/ are allocated dynamically. This allows you to have
@@ -134,7 +125,6 @@ config SND_DYNAMIC_MINORS
config SND_SUPPORT_OLD_API
bool "Support old ALSA API"
- depends on SND
default y
help
Say Y here to support the obsolete ALSA PCM API (ver.0.9.0 rc3
@@ -142,7 +132,7 @@ config SND_SUPPORT_OLD_API
config SND_VERBOSE_PROCFS
bool "Verbose procfs contents"
- depends on SND && PROC_FS
+ depends on PROC_FS
default y
help
Say Y here to include code for verbose procfs contents (provides
@@ -151,7 +141,6 @@ config SND_VERBOSE_PROCFS
config SND_VERBOSE_PRINTK
bool "Verbose printk"
- depends on SND
help
Say Y here to enable verbose log messages. These messages
will help to identify source file and position containing
@@ -161,7 +150,6 @@ config SND_VERBOSE_PRINTK
config SND_DEBUG
bool "Debug"
- depends on SND
help
Say Y here to enable ALSA debug code.
--- linux-2.6.21-mm_20070428.orig/sound/drivers/Kconfig
+++ linux-2.6.21-mm_20070428/sound/drivers/Kconfig
@@ -1,9 +1,5 @@
# ALSA generic drivers
-menu "Generic devices"
- depends on SND!=n
-
-
config SND_MPU401_UART
tristate
select SND_RAWMIDI
@@ -28,9 +24,14 @@ config SND_AC97_CODEC
select SND_PCM
select AC97_BUS
+menuconfig SND_GENERIC_DRIVERS
+ bool "Generic devices"
+ default y
+
+if SND_GENERIC_DRIVERS
+
config SND_DUMMY
tristate "Dummy (/dev/null) soundcard"
- depends on SND
select SND_PCM
help
Say Y here to include the dummy driver. This driver does
@@ -59,7 +60,6 @@ config SND_VIRMIDI
config SND_MTPAV
tristate "MOTU MidiTimePiece AV multiport MIDI"
- depends on SND
select SND_RAWMIDI
help
To use a MOTU MidiTimePiece AV multiport MIDI adapter
@@ -71,7 +71,7 @@ config SND_MTPAV
config SND_MTS64
tristate "ESI Miditerminal 4140 driver"
- depends on SND && PARPORT
+ depends on PARPORT
select SND_RAWMIDI
help
The ESI Miditerminal 4140 is a 4 In 4 Out MIDI Interface with
@@ -84,7 +84,6 @@ config SND_MTS64
config SND_SERIAL_U16550
tristate "UART16550 serial MIDI driver"
- depends on SND
select SND_RAWMIDI
help
To include support for MIDI serial port interfaces, say Y here
@@ -100,7 +99,6 @@ config SND_SERIAL_U16550
config SND_MPU401
tristate "Generic MPU-401 UART driver"
- depends on SND
select SND_MPU401_UART
help
Say Y here to include support for MIDI ports compatible with
@@ -111,7 +109,7 @@ config SND_MPU401
config SND_PORTMAN2X4
tristate "Portman 2x4 driver"
- depends on SND && PARPORT
+ depends on PARPORT
select SND_RAWMIDI
help
Say Y here to include support for Midiman Portman 2x4 parallel
@@ -120,4 +118,4 @@ config SND_PORTMAN2X4
To compile this driver as a module, choose M here: the module
will be called snd-portman2x4.
-endmenu
+endif # SND_GENERIC_DRIVERS
--- linux-2.6.21-mm_20070428.orig/sound/isa/Kconfig
+++ linux-2.6.21-mm_20070428/sound/isa/Kconfig
@@ -1,7 +1,11 @@
# ALSA ISA drivers
-menu "ISA devices"
- depends on SND!=n && ISA && ISA_DMA_API
+menuconfig SND_ISA_DRIVERS
+ bool "ISA devices"
+ depends on ISA && ISA_DMA_API
+ default y
+
+if SND_ISA_DRIVERS
config SND_AD1848_LIB
tristate
@@ -13,7 +17,6 @@ config SND_CS4231_LIB
config SND_ADLIB
tristate "AdLib FM card"
- depends on SND
select SND_OPL3_LIB
help
Say Y here to include support for AdLib FM cards.
@@ -23,7 +26,7 @@ config SND_ADLIB
config SND_AD1816A
tristate "Analog Devices SoundPort AD1816A"
- depends on SND && PNP && ISA
+ depends on PNP
select ISAPNP
select SND_OPL3_LIB
select SND_MPU401_UART
@@ -37,7 +40,6 @@ config SND_AD1816A
config SND_AD1848
tristate "Generic AD1848/CS4248 driver"
- depends on SND
select SND_AD1848_LIB
help
Say Y here to include support for AD1848 (Analog Devices) or
@@ -51,7 +53,7 @@ config SND_AD1848
config SND_ALS100
tristate "Avance Logic ALS100/ALS120"
- depends on SND && PNP && ISA
+ depends on PNP
select ISAPNP
select SND_OPL3_LIB
select SND_MPU401_UART
@@ -65,7 +67,7 @@ config SND_ALS100
config SND_AZT2320
tristate "Aztech Systems AZT2320"
- depends on SND && PNP && ISA
+ depends on PNP
select ISAPNP
select SND_OPL3_LIB
select SND_MPU401_UART
@@ -79,7 +81,6 @@ config SND_AZT2320
config SND_CMI8330
tristate "C-Media CMI8330"
- depends on SND
select SND_AD1848_LIB
help
Say Y here to include support for soundcards based on the
@@ -90,7 +91,6 @@ config SND_CMI8330
config SND_CS4231
tristate "Generic Cirrus Logic CS4231 driver"
- depends on SND
select SND_MPU401_UART
select SND_CS4231_LIB
help
@@ -102,7 +102,6 @@ config SND_CS4231
config SND_CS4232
tristate "Generic Cirrus Logic CS4232 driver"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_CS4231_LIB
@@ -115,7 +114,6 @@ config SND_CS4232
config SND_CS4236
tristate "Generic Cirrus Logic CS4236+ driver"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_CS4231_LIB
@@ -128,7 +126,7 @@ config SND_CS4236
config SND_DT019X
tristate "Diamond Technologies DT-019X, Avance Logic ALS-007"
- depends on SND && PNP && ISA
+ depends on PNP
select ISAPNP
select SND_OPL3_LIB
select SND_MPU401_UART
@@ -142,7 +140,7 @@ config SND_DT019X
config SND_ES968
tristate "Generic ESS ES968 driver"
- depends on SND && PNP && ISA
+ depends on PNP
select ISAPNP
select SND_MPU401_UART
select SND_PCM
@@ -154,7 +152,6 @@ config SND_ES968
config SND_ES1688
tristate "Generic ESS ES688/ES1688 driver"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
@@ -167,7 +164,6 @@ config SND_ES1688
config SND_ES18XX
tristate "Generic ESS ES18xx driver"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
@@ -182,7 +178,6 @@ config SND_GUS_SYNTH
config SND_GUSCLASSIC
tristate "Gravis UltraSound Classic"
- depends on SND
select SND_RAWMIDI
select SND_PCM
select SND_GUS_SYNTH
@@ -195,7 +190,6 @@ config SND_GUSCLASSIC
config SND_GUSEXTREME
tristate "Gravis UltraSound Extreme"
- depends on SND
select SND_HWDEP
select SND_MPU401_UART
select SND_PCM
@@ -209,7 +203,6 @@ config SND_GUSEXTREME
config SND_GUSMAX
tristate "Gravis UltraSound MAX"
- depends on SND
select SND_RAWMIDI
select SND_CS4231_LIB
select SND_GUS_SYNTH
@@ -222,7 +215,7 @@ config SND_GUSMAX
config SND_INTERWAVE
tristate "AMD InterWave, Gravis UltraSound PnP"
- depends on SND && PNP && ISA
+ depends on PNP
select SND_RAWMIDI
select SND_CS4231_LIB
select SND_GUS_SYNTH
@@ -236,7 +229,7 @@ config SND_INTERWAVE
config SND_INTERWAVE_STB
tristate "AMD InterWave + TEA6330T (UltraSound 32-Pro)"
- depends on SND && PNP && ISA
+ depends on PNP
select SND_RAWMIDI
select SND_CS4231_LIB
select SND_GUS_SYNTH
@@ -250,7 +243,6 @@ config SND_INTERWAVE_STB
config SND_OPL3SA2
tristate "Yamaha OPL3-SA2/SA3"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_CS4231_LIB
@@ -263,7 +255,6 @@ config SND_OPL3SA2
config SND_OPTI92X_AD1848
tristate "OPTi 82C92x - AD1848"
- depends on SND
select SND_OPL3_LIB
select SND_OPL4_LIB
select SND_MPU401_UART
@@ -277,7 +268,6 @@ config SND_OPTI92X_AD1848
config SND_OPTI92X_CS4231
tristate "OPTi 82C92x - CS4231"
- depends on SND
select SND_OPL3_LIB
select SND_OPL4_LIB
select SND_MPU401_UART
@@ -291,7 +281,6 @@ config SND_OPTI92X_CS4231
config SND_OPTI93X
tristate "OPTi 82C93x"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
@@ -304,7 +293,6 @@ config SND_OPTI93X
config SND_MIRO
tristate "Miro miroSOUND PCM1pro/PCM12/PCM20radio driver"
- depends on SND
select SND_OPL4_LIB
select SND_CS4231_LIB
select SND_MPU401_UART
@@ -318,7 +306,6 @@ config SND_MIRO
config SND_SB8
tristate "Sound Blaster 1.0/2.0/Pro (8-bit)"
- depends on SND
select SND_OPL3_LIB
select SND_RAWMIDI
select SND_PCM
@@ -331,7 +318,6 @@ config SND_SB8
config SND_SB16
tristate "Sound Blaster 16 (PnP)"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
@@ -344,7 +330,6 @@ config SND_SB16
config SND_SBAWE
tristate "Sound Blaster AWE (32,64) (PnP)"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
@@ -386,7 +371,6 @@ config SND_SGALAXY
config SND_SSCAPE
tristate "Ensoniq SoundScape PnP driver"
- depends on SND
select SND_HWDEP
select SND_MPU401_UART
select SND_CS4231_LIB
@@ -399,7 +383,6 @@ config SND_SSCAPE
config SND_WAVEFRONT
tristate "Turtle Beach Maui,Tropez,Tropez+ (Wavefront)"
- depends on SND
select FW_LOADER
select SND_OPL3_LIB
select SND_MPU401_UART
@@ -420,4 +403,4 @@ config SND_WAVEFRONT_FIRMWARE_IN_KERNEL
for the Wavefront driver. If you choose N here, you need to
install the firmware files from the alsa-firmware package.
-endmenu
+endif # SND_ISA_DRIVERS
--- linux-2.6.21-mm_20070428.orig/sound/mips/Kconfig
+++ linux-2.6.21-mm_20070428/sound/mips/Kconfig
@@ -1,15 +1,18 @@
# ALSA MIPS drivers
-menu "ALSA MIPS devices"
- depends on SND!=n && MIPS
+menuconfig SND_MIPS_DRIVERS
+ bool "ALSA MIPS devices"
+ depends on MIPS
+ default y
+
+if SND_MIPS_DRIVERS
config SND_AU1X00
tristate "Au1x00 AC97 Port Driver"
- depends on (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && SND
+ depends on SOC_AU1000 || SOC_AU1100 || SOC_AU1500
select SND_PCM
select SND_AC97_CODEC
help
ALSA Sound driver for the Au1x00's AC97 port.
-endmenu
-
+endif # SND_MIPS_DRIVERS
--- linux-2.6.21-mm_20070428.orig/sound/oss/Kconfig
+++ linux-2.6.21-mm_20070428/sound/oss/Kconfig
@@ -376,16 +376,16 @@ config SOUND_OSS
driver for your sound card above, then pick your driver from the
list below.
+if SOUND_OSS
+
config SOUND_TRACEINIT
bool "Verbose initialisation"
- depends on SOUND_OSS
help
Verbose soundcard initialization -- affects the format of autoprobe
and initialization messages at boot time.
config SOUND_DMAP
bool "Persistent DMA buffers"
- depends on SOUND_OSS
---help---
Linux can often have problems allocating DMA buffers for ISA sound
cards on machines with more than 16MB of RAM. This is because ISA
@@ -402,7 +402,7 @@ config SOUND_DMAP
config SOUND_CS4232
tristate "Crystal CS4232 based (PnP) cards"
- depends on SOUND_OSS && OSS_OBSOLETE
+ depends on OSS_OBSOLETE
help
Say Y here if you have a card based on the Crystal CS4232 chip set,
which uses its own Plug and Play protocol.
@@ -416,7 +416,6 @@ config SOUND_CS4232
config SOUND_SSCAPE
tristate "Ensoniq SoundScape support"
- depends on SOUND_OSS
help
Answer Y if you have a sound card based on the Ensoniq SoundScape
chipset. Such cards are being manufactured at least by Ensoniq, Spea
@@ -429,13 +428,11 @@ config SOUND_SSCAPE
config SOUND_VMIDI
tristate "Loopback MIDI device support"
- depends on SOUND_OSS
help
Support for MIDI loopback on port 1 or 2.
config SOUND_TRIX
tristate "MediaTrix AudioTrix Pro support"
- depends on SOUND_OSS
help
Answer Y if you have the AudioTriX Pro sound card manufactured
by MediaTrix.
@@ -459,7 +456,6 @@ config TRIX_BOOT_FILE
config SOUND_MSS
tristate "Microsoft Sound System support"
- depends on SOUND_OSS
---help---
Again think carefully before answering Y to this question. It's
safe to answer Y if you have the original Windows Sound System card
@@ -491,7 +487,6 @@ config SOUND_MSS
config SOUND_MPU401
tristate "MPU-401 support (NOT for SB16)"
- depends on SOUND_OSS
---help---
Be careful with this question. The MPU401 interface is supported by
all sound cards. However, some natively supported cards have their
@@ -507,7 +502,6 @@ config SOUND_MPU401
config SOUND_PAS
tristate "ProAudioSpectrum 16 support"
- depends on SOUND_OSS
---help---
Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio
16 or Logitech SoundMan 16 sound card. Answer N if you have some
@@ -529,7 +523,6 @@ config PAS_JOYSTICK
config SOUND_PSS
tristate "PSS (AD1848, ADSP-2115, ESC614) support"
- depends on SOUND_OSS
help
Answer Y or M if you have an Orchid SW32, Cardinal DSP16, Beethoven
ADSP-16 or some other card based on the PSS chipset (AD1848 codec +
@@ -572,7 +565,6 @@ config PSS_BOOT_FILE
config SOUND_SB
tristate "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16)
support"
- depends on SOUND_OSS
---help---
Answer Y if you have an original Sound Blaster card made by Creative
Labs or a 100% hardware compatible clone (like the Thunderboard or
@@ -597,9 +589,12 @@ config SOUND_SB
You can say M here to compile this driver as a module; the module is
called sb.
+config SOUND_KAHLUA
+ tristate "XpressAudio Sound Blaster emulation"
+ depends on SOUND_SB
+
config SOUND_YM3812
tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
- depends on SOUND_OSS
---help---
Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
Answering Y is usually a safe and recommended choice, however some
@@ -615,7 +610,6 @@ config SOUND_YM3812
config SOUND_UART6850
tristate "6850 UART support"
- depends on SOUND_OSS
help
This option enables support for MIDI interfaces based on the 6850
UART chip. This interface is rarely found on sound cards. It's safe
@@ -626,7 +620,6 @@ config SOUND_UART6850
config SOUND_AEDSP16
tristate "Gallant Audio Cards (SC-6000 and SC-6600 based)"
- depends on SOUND_OSS
---help---
Answer Y if you have a Gallant's Audio Excel DSP 16 card. This
driver supports Audio Excel DSP 16 but not the III nor PnP versions
@@ -707,14 +700,14 @@ endchoice
config SOUND_VIDC
tristate "VIDC 16-bit sound"
- depends on ARM && (ARCH_ACORN || ARCH_CLPS7500) && SOUND_OSS
+ depends on ARM && (ARCH_ACORN || ARCH_CLPS7500)
help
16-bit support for the VIDC onboard sound hardware found on Acorn
machines.
config SOUND_WAVEARTIST
tristate "Netwinder WaveArtist"
- depends on ARM && SOUND_OSS && ARCH_NETWINDER
+ depends on ARM && ARCH_NETWINDER
help
Say Y here to include support for the Rockwell WaveArtist sound
system. This driver is mainly for the NetWinder.
@@ -726,9 +719,7 @@ config SOUND_TVMIXER
Support for audio mixer facilities on the BT848 TV frame-grabber
card.
-config SOUND_KAHLUA
- tristate "XpressAudio Sound Blaster emulation"
- depends on SOUND_SB
+endif # SOUND_OSS
config SOUND_SH_DAC_AUDIO
tristate "SuperH DAC audio support"
--- linux-2.6.21-mm_20070428.orig/sound/parisc/Kconfig
+++ linux-2.6.21-mm_20070428/sound/parisc/Kconfig
@@ -1,15 +1,18 @@
# ALSA PA-RISC drivers
-menu "GSC devices"
- depends on SND!=n && GSC
+menuconfig SND_PARISC_DRIVERS
+ bool "GSC devices"
+ depends on GSC
+ default y
+
+if SND_PARISC_DRIVERS
config SND_HARMONY
tristate "Harmony/Vivace sound chip"
- depends on SND
select SND_PCM
help
Say 'Y' or 'M' to include support for the Harmony/Vivace sound
chip found in most GSC-based PA-RISC workstations. It's frequently
provided as part of the Lasi multi-function IC.
-endmenu
+endif # SND_PARISC_DRIVERS
--- linux-2.6.21-mm_20070428.orig/sound/pci/Kconfig
+++ linux-2.6.21-mm_20070428/sound/pci/Kconfig
@@ -1,11 +1,14 @@
# ALSA PCI drivers
-menu "PCI devices"
- depends on SND!=n && PCI
+menuconfig SND_PCI_DRIVERS
+ bool "PCI devices"
+ depends on PCI
+ default y
+
+if SND_PCI_DRIVERS
config SND_AD1889
tristate "Analog Devices AD1889"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for the integrated AC97 sound
@@ -17,7 +20,6 @@ config SND_AD1889
config SND_ALS300
tristate "Avance Logic ALS300/ALS300+"
- depends on SND
select SND_PCM
select SND_AC97_CODEC
select SND_OPL3_LIB
@@ -29,7 +31,7 @@ config SND_ALS300
config SND_ALS4000
tristate "Avance Logic ALS4000"
- depends on SND && ISA_DMA_API
+ depends on ISA_DMA_API
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
@@ -42,7 +44,6 @@ config SND_ALS4000
config SND_ALI5451
tristate "ALi M5451 PCI Audio Controller"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
@@ -56,7 +57,6 @@ config SND_ALI5451
config SND_ATIIXP
tristate "ATI IXP AC97 Controller"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for the integrated AC97 sound
@@ -68,7 +68,6 @@ config SND_ATIIXP
config SND_ATIIXP_MODEM
tristate "ATI IXP Modem"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for the integrated MC97 modem on
@@ -79,7 +78,6 @@ config SND_ATIIXP_MODEM
config SND_AU8810
tristate "Aureal Advantage"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
@@ -94,7 +92,6 @@ config SND_AU8810
config SND_AU8820
tristate "Aureal Vortex"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
@@ -108,7 +105,6 @@ config SND_AU8820
config SND_AU8830
tristate "Aureal Vortex 2"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
@@ -123,7 +119,7 @@ config SND_AU8830
config SND_AZT3328
tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)"
- depends on SND && EXPERIMENTAL
+ depends on EXPERIMENTAL
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
@@ -136,7 +132,6 @@ config SND_AZT3328
config SND_BT87X
tristate "Bt87x Audio Capture"
- depends on SND
select SND_PCM
help
If you want to record audio from TV cards based on
@@ -158,7 +153,6 @@ config SND_BT87X_OVERCLOCK
config SND_CA0106
tristate "SB Audigy LS / Live 24bit"
- depends on SND
select SND_AC97_CODEC
select SND_RAWMIDI
help
@@ -170,7 +164,6 @@ config SND_CA0106
config SND_CMIPCI
tristate "C-Media 8738, 8338"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
@@ -184,7 +177,6 @@ config SND_CMIPCI
config SND_CS4281
tristate "Cirrus Logic (Sound Fusion) CS4281"
- depends on SND
select SND_OPL3_LIB
select SND_RAWMIDI
select SND_AC97_CODEC
@@ -196,7 +188,6 @@ config SND_CS4281
config SND_CS46XX
tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"
- depends on SND
select SND_RAWMIDI
select SND_AC97_CODEC
help
@@ -217,7 +208,7 @@ config SND_CS46XX_NEW_DSP
config SND_CS5535AUDIO
tristate "CS5535/CS5536 Audio"
- depends on SND && X86 && !X86_64
+ depends on X86 && !X86_64
select SND_PCM
select SND_AC97_CODEC
help
@@ -235,7 +226,6 @@ config SND_CS5535AUDIO
config SND_DARLA20
tristate "(Echoaudio) Darla20"
- depends on SND
select FW_LOADER
select SND_PCM
help
@@ -246,7 +236,6 @@ config SND_DARLA20
config SND_GINA20
tristate "(Echoaudio) Gina20"
- depends on SND
select FW_LOADER
select SND_PCM
help
@@ -257,7 +246,6 @@ config SND_GINA20
config SND_LAYLA20
tristate "(Echoaudio) Layla20"
- depends on SND
select FW_LOADER
select SND_RAWMIDI
select SND_PCM
@@ -269,7 +257,6 @@ config SND_LAYLA20
config SND_DARLA24
tristate "(Echoaudio) Darla24"
- depends on SND
select FW_LOADER
select SND_PCM
help
@@ -280,7 +267,6 @@ config SND_DARLA24
config SND_GINA24
tristate "(Echoaudio) Gina24"
- depends on SND
select FW_LOADER
select SND_PCM
help
@@ -291,7 +277,6 @@ config SND_GINA24
config SND_LAYLA24
tristate "(Echoaudio) Layla24"
- depends on SND
select FW_LOADER
select SND_RAWMIDI
select SND_PCM
@@ -303,7 +288,6 @@ config SND_LAYLA24
config SND_MONA
tristate "(Echoaudio) Mona"
- depends on SND
select FW_LOADER
select SND_RAWMIDI
select SND_PCM
@@ -315,7 +299,6 @@ config SND_MONA
config SND_MIA
tristate "(Echoaudio) Mia"
- depends on SND
select FW_LOADER
select SND_RAWMIDI
select SND_PCM
@@ -327,7 +310,6 @@ config SND_MIA
config SND_ECHO3G
tristate "(Echoaudio) 3G cards"
- depends on SND
select FW_LOADER
select SND_RAWMIDI
select SND_PCM
@@ -339,7 +321,6 @@ config SND_ECHO3G
config SND_INDIGO
tristate "(Echoaudio) Indigo"
- depends on SND
select FW_LOADER
select SND_PCM
help
@@ -350,7 +331,6 @@ config SND_INDIGO
config SND_INDIGOIO
tristate "(Echoaudio) Indigo IO"
- depends on SND
select FW_LOADER
select SND_PCM
help
@@ -361,7 +341,6 @@ config SND_INDIGOIO
config SND_INDIGODJ
tristate "(Echoaudio) Indigo DJ"
- depends on SND
select FW_LOADER
select SND_PCM
help
@@ -372,7 +351,6 @@ config SND_INDIGODJ
config SND_EMU10K1
tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"
- depends on SND
select FW_LOADER
select SND_HWDEP
select SND_RAWMIDI
@@ -390,7 +368,6 @@ config SND_EMU10K1
config SND_EMU10K1X
tristate "Emu10k1X (Dell OEM Version)"
- depends on SND
select SND_AC97_CODEC
select SND_RAWMIDI
help
@@ -402,7 +379,6 @@ config SND_EMU10K1X
config SND_ENS1370
tristate "(Creative) Ensoniq AudioPCI 1370"
- depends on SND
select SND_RAWMIDI
select SND_PCM
help
@@ -413,7 +389,6 @@ config SND_ENS1370
config SND_ENS1371
tristate "(Creative) Ensoniq AudioPCI 1371/1373"
- depends on SND
select SND_RAWMIDI
select SND_AC97_CODEC
help
@@ -425,7 +400,6 @@ config SND_ENS1371
config SND_ES1938
tristate "ESS ES1938/1946/1969 (Solo-1)"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
@@ -438,7 +412,6 @@ config SND_ES1938
config SND_ES1968
tristate "ESS ES1968/1978 (Maestro-1/2/2E)"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
@@ -450,7 +423,6 @@ config SND_ES1968
config SND_FM801
tristate "ForteMedia FM801"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
@@ -480,7 +452,6 @@ config SND_FM801_TEA575X
config SND_HDA_INTEL
tristate "Intel HD Audio"
- depends on SND
select SND_PCM
help
Say Y here to include support for Intel "High Definition
@@ -491,7 +462,6 @@ config SND_HDA_INTEL
config SND_HDSP
tristate "RME Hammerfall DSP Audio"
- depends on SND
select SND_HWDEP
select SND_RAWMIDI
select SND_PCM
@@ -504,7 +474,6 @@ config SND_HDSP
config SND_HDSPM
tristate "RME Hammerfall DSP MADI"
- depends on SND
select SND_HWDEP
select SND_RAWMIDI
select SND_PCM
@@ -517,7 +486,6 @@ config SND_HDSPM
config SND_ICE1712
tristate "ICEnsemble ICE1712 (Envy24)"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
@@ -534,7 +502,6 @@ config SND_ICE1712
config SND_ICE1724
tristate "ICE/VT1724/1720 (Envy24HT/PT)"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
@@ -551,7 +518,6 @@ config SND_ICE1724
config SND_INTEL8X0
tristate "Intel/SiS/nVidia/AMD/ALi AC97 Controller"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for the integrated AC97 sound
@@ -564,7 +530,6 @@ config SND_INTEL8X0
config SND_INTEL8X0M
tristate "Intel/SiS/nVidia/AMD MC97 Modem"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for the integrated MC97 modem on
@@ -575,7 +540,6 @@ config SND_INTEL8X0M
config SND_KORG1212
tristate "Korg 1212 IO"
- depends on SND
select FW_LOADER
select SND_PCM
help
@@ -595,7 +559,6 @@ config SND_KORG1212_FIRMWARE_IN_KERNEL
config SND_MAESTRO3
tristate "ESS Allegro/Maestro3"
- depends on SND
select FW_LOADER
select SND_AC97_CODEC
help
@@ -616,7 +579,6 @@ config SND_MAESTRO3_FIRMWARE_IN_KERNEL
config SND_MIXART
tristate "Digigram miXart"
- depends on SND
select SND_HWDEP
select SND_PCM
help
@@ -628,7 +590,6 @@ config SND_MIXART
config SND_NM256
tristate "NeoMagic NM256AV/ZX"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for NeoMagic NM256AV/ZX chips.
@@ -638,7 +599,6 @@ config SND_NM256
config SND_PCXHR
tristate "Digigram PCXHR"
- depends on SND
select SND_PCM
select SND_HWDEP
help
@@ -649,7 +609,6 @@ config SND_PCXHR
config SND_RIPTIDE
tristate "Conexant Riptide"
- depends on SND
select FW_LOADER
select SND_OPL3_LIB
select SND_MPU401_UART
@@ -662,7 +621,6 @@ config SND_RIPTIDE
config SND_RME32
tristate "RME Digi32, 32/8, 32 PRO"
- depends on SND
select SND_PCM
help
Say Y to include support for RME Digi32, Digi32 PRO and
@@ -674,7 +632,6 @@ config SND_RME32
config SND_RME96
tristate "RME Digi96, 96/8, 96/8 PRO"
- depends on SND
select SND_PCM
help
Say Y here to include support for RME Digi96, Digi96/8 and
@@ -685,7 +642,6 @@ config SND_RME96
config SND_RME9652
tristate "RME Digi9652 (Hammerfall)"
- depends on SND
select SND_PCM
help
Say Y here to include support for RME Hammerfall (RME
@@ -696,7 +652,6 @@ config SND_RME9652
config SND_SONICVIBES
tristate "S3 SonicVibes"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
@@ -709,7 +664,6 @@ config SND_SONICVIBES
config SND_TRIDENT
tristate "Trident 4D-Wave DX/NX; SiS 7018"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
@@ -721,7 +675,6 @@ config SND_TRIDENT
config SND_VIA82XX
tristate "VIA 82C686A/B, 8233/8235 AC97 Controller"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
@@ -733,7 +686,6 @@ config SND_VIA82XX
config SND_VIA82XX_MODEM
tristate "VIA 82C686A/B, 8233 based Modems"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for the integrated MC97 modem on
@@ -744,7 +696,6 @@ config SND_VIA82XX_MODEM
config SND_VX222
tristate "Digigram VX222"
- depends on SND
select SND_VX_LIB
help
Say Y here to include support for Digigram VX222 soundcards.
@@ -754,7 +705,6 @@ config SND_VX222
config SND_YMFPCI
tristate "Yamaha YMF724/740/744/754"
- depends on SND
select FW_LOADER
select SND_OPL3_LIB
select SND_MPU401_UART
@@ -788,4 +738,4 @@ config SND_AC97_POWER_SAVE
snd-ac97-codec driver. You can toggle it dynamically over
sysfs, too.
-endmenu
+endif # SND_PCI_DRIVERS
--- linux-2.6.21-mm_20070428.orig/sound/pcmcia/Kconfig
+++ linux-2.6.21-mm_20070428/sound/pcmcia/Kconfig
@@ -1,11 +1,14 @@
# ALSA PCMCIA drivers
-menu "PCMCIA devices"
- depends on SND!=n && PCMCIA
+menuconfig SND_PCMCIA_DRIVERS
+ bool "PCMCIA devices"
+ depends on PCMCIA
+ default y
+
+if SND_PCMCIA_DRIVERS
config SND_VXPOCKET
tristate "Digigram VXpocket"
- depends on SND && PCMCIA
select SND_VX_LIB
help
Say Y here to include support for Digigram VXpocket and
@@ -16,7 +19,6 @@ config SND_VXPOCKET
config SND_PDAUDIOCF
tristate "Sound Core PDAudioCF"
- depends on SND && PCMCIA
select SND_PCM
help
Say Y here to include support for Sound Core PDAudioCF
@@ -25,4 +27,4 @@ config SND_PDAUDIOCF
To compile this driver as a module, choose M here: the module
will be called snd-pdaudiocf.
-endmenu
+endif # SND_PCMCIA_DRIVERS
--- linux-2.6.21-mm_20070428.orig/sound/ppc/Kconfig
+++ linux-2.6.21-mm_20070428/sound/ppc/Kconfig
@@ -1,17 +1,21 @@
# ALSA PowerMac drivers
-menu "ALSA PowerMac devices"
- depends on SND!=n && PPC
+menuconfig SND_PPC_DRIVERS
+ bool "ALSA PowerMac devices"
+ depends on PPC
+ default y
+
+if SND_PPC_DRIVERS
comment "ALSA PowerMac requires I2C"
- depends on SND && I2C=n
+ depends on I2C=n
comment "ALSA PowerMac requires INPUT"
- depends on SND && INPUT=n
+ depends on INPUT=n
config SND_POWERMAC
tristate "PowerMac (AWACS, DACA, Burgundy, Tumbler, Keywest)"
- depends on SND && I2C && INPUT && PPC_PMAC
+ depends on I2C && INPUT && PPC_PMAC
select SND_PCM
help
Say Y here to include support for the integrated sound device.
@@ -32,4 +36,4 @@ config SND_POWERMAC_AUTO_DRC
Note that you can turn on/off DRC manually even without this
option.
-endmenu
+endif # SND_PPC_DRIVERS
--- linux-2.6.21-mm_20070428.orig/sound/soc/Kconfig
+++ linux-2.6.21-mm_20070428/sound/soc/Kconfig
@@ -2,15 +2,17 @@
# SoC audio configuration
#
-menu "System on Chip audio support"
- depends on SND!=n
+menuconfig SND_SOC_DRIVERS
+ bool "System on Chip audio support"
+ default y
+
+if SND_SOC_DRIVERS
config SND_SOC_AC97_BUS
bool
config SND_SOC
tristate "ALSA for SoC audio support"
- depends on SND
select SND_PCM
---help---
@@ -31,4 +33,4 @@ source "sound/soc/s3c24xx/Kconfig"
# Supported codecs
source "sound/soc/codecs/Kconfig"
-endmenu
+endif # SND_SOC_DRIVERS
--- linux-2.6.21-mm_20070428.orig/sound/soc/codecs/Kconfig
+++ linux-2.6.21-mm_20070428/sound/soc/codecs/Kconfig
@@ -1,19 +1,18 @@
+if SND_SOC
+
config SND_SOC_AC97_CODEC
tristate
- depends on SND_SOC
config SND_SOC_WM8731
tristate
- depends on SND_SOC
config SND_SOC_WM8750
tristate
- depends on SND_SOC
config SND_SOC_WM8753
tristate
- depends on SND_SOC
config SND_SOC_WM9712
tristate
- depends on SND_SOC
+
+endif # SND_SOC
--- linux-2.6.21-mm_20070428.orig/sound/sparc/Kconfig
+++ linux-2.6.21-mm_20070428/sound/sparc/Kconfig
@@ -1,11 +1,15 @@
# ALSA Sparc drivers
-menu "ALSA Sparc devices"
- depends on SND!=n && SPARC
+menuconfig SND_SPARC_DRIVERS
+ bool "ALSA Sparc devices"
+ depends on SPARC
+ default y
+
+if SND_SPARC_DRIVERS
config SND_SUN_AMD7930
tristate "Sun AMD7930"
- depends on SBUS && SND
+ depends on SBUS
select SND_PCM
help
Say Y here to include support for AMD7930 sound device on Sun.
@@ -15,7 +19,6 @@ config SND_SUN_AMD7930
config SND_SUN_CS4231
tristate "Sun CS4231"
- depends on SND
select SND_PCM
help
Say Y here to include support for CS4231 sound device on Sun.
@@ -25,7 +28,7 @@ config SND_SUN_CS4231
config SND_SUN_DBRI
tristate "Sun DBRI"
- depends on SND && SBUS
+ depends on SBUS
select SND_PCM
help
Say Y here to include support for DBRI sound device on Sun.
@@ -33,4 +36,4 @@ config SND_SUN_DBRI
To compile this driver as a module, choose M here: the module
will be called snd-sun-dbri.
-endmenu
+endif # SND_SPARC_DRIVERS
--- linux-2.6.21-mm_20070428.orig/sound/usb/Kconfig
+++ linux-2.6.21-mm_20070428/sound/usb/Kconfig
@@ -1,11 +1,14 @@
# ALSA USB drivers
-menu "USB devices"
- depends on SND!=n && USB!=n
+menuconfig SND_USB_DRIVERS
+ bool "USB devices"
+ depends on USB
+ default y
+
+if SND_USB_DRIVERS
config SND_USB_AUDIO
tristate "USB Audio/MIDI driver"
- depends on SND && USB
select SND_HWDEP
select SND_RAWMIDI
select SND_PCM
@@ -18,7 +21,7 @@ config SND_USB_AUDIO
config SND_USB_USX2Y
tristate "Tascam US-122, US-224 and US-428 USB driver"
- depends on SND && USB && (X86 || PPC || ALPHA)
+ depends on X86 || PPC || ALPHA
select SND_HWDEP
select SND_RAWMIDI
select SND_PCM
@@ -31,7 +34,6 @@ config SND_USB_USX2Y
config SND_USB_CAIAQ
tristate "Native Instruments USB audio devices"
- depends on SND && USB
select SND_HWDEP
select SND_RAWMIDI
select SND_PCM
@@ -57,5 +59,4 @@ config SND_USB_CAIAQ_INPUT
* Native Instruments RigKontrol2
* Native Instruments Audio Kontrol 1
-endmenu
-
+endif # SND_USB_DRIVERS
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
