On Tue, Oct 10, 2017 at 02:25:35AM +0000, Chen-Yu Tsai wrote: > On Tue, Oct 10, 2017 at 7:25 AM, Icenowy Zheng <icen...@aosc.io> wrote: > > > > > > 于 2017年10月10日 GMT+08:00 上午5:04:07, Maxime Ripard > > <maxime.rip...@free-electrons.com> 写到: > >>On Sun, Oct 08, 2017 at 04:29:03AM +0000, Icenowy Zheng wrote: > >>> On newer revisions of the Banana Pi M2 Ultra boards, the 5V power > >>output > >>> (used by HDMI, SATA and USB) is controller via a GPIO. > >>> > >>> Add the regulator node for it. > >>> > >>> Older revisions just have the 5V power output always on, and the GPIO > >>is > >>> reserved on these boards. So it won't affect the older revisions. > >>> > >>> Signed-off-by: Icenowy Zheng <icen...@aosc.io> > >>> --- > >>> arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 9 +++++++++ > >>> 1 file changed, 9 insertions(+) > >>> > >>> diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts > >>b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts > >>> index 7b52608cebe6..035599d870b9 100644 > >>> --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts > >>> +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts > >>> @@ -78,6 +78,15 @@ > >>> }; > >>> }; > >>> > >>> + reg_vcc5v0: vcc5v0 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "vcc5v0"; > >>> + regulator-min-microvolt = <5000000>; > >>> + regulator-max-microvolt = <5000000>; > >>> + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ > >>> + enable-active-high; > >> > >>This is redundant with the GPIO flag > > > > I remember someone suggested me to add this > > property (maybe wens). It's said that the driver may not > > process the GPIO_ACTIVE_HIGH correctly. > > I believe it was me. The fixed regulator driver has not migrated to > the GPIO descriptor API, and it doesn't look like it cares about the > GPIO flags.
Maybe we should just migrate it then? Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
signature.asc
Description: PGP signature