On Sun, Sep 24, 2017 at 08:26:41AM +0200, Christophe JAILLET wrote:
> All sanity checks in this function set 'sdmac->status = DMA_ERROR' if
> something looks wrong, except if the byte count or the address don't match
> the bus width.
>
> Fix it and report the error in status in such a case.
>
> Signed-off-by: Christophe JAILLET <christophe.jail...@wanadoo.fr>
> ---
> Untested, so please review carefuly.
> ---
> drivers/dma/imx-sdma.c | 17 +++++++++++------
> 1 file changed, 11 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> index a67ec1bdc4e0..f0419967eb92 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -1240,26 +1240,31 @@ static struct dma_async_tx_descriptor
> *sdma_prep_slave_sg(
> sdmac->chn_count += count;
>
> if (sdmac->word_size > DMA_SLAVE_BUSWIDTH_4_BYTES) {
> - ret = -EINVAL;
> + ret = -EINVAL;
this is a style fix and should not be part of this patch
> goto err_out;
> }
>
> switch (sdmac->word_size) {
> case DMA_SLAVE_BUSWIDTH_4_BYTES:
> bd->mode.command = 0;
> - if (count & 3 || sg->dma_address & 3)
> - return NULL;
> + if (count & 3 || sg->dma_address & 3) {
> + ret = -EINVAL;
> + goto err_out;
> + }
this looks okay, but then slave configuration comes from different path, so
not sure if not setting was intentional or a miss. Fabio, Nandor??
> break;
> case DMA_SLAVE_BUSWIDTH_2_BYTES:
> bd->mode.command = 2;
> - if (count & 1 || sg->dma_address & 1)
> - return NULL;
> + if (count & 1 || sg->dma_address & 1) {
> + ret = -EINVAL;
> + goto err_out;
> + }
> break;
> case DMA_SLAVE_BUSWIDTH_1_BYTE:
> bd->mode.command = 1;
> break;
> default:
> - return NULL;
> + ret = -EINVAL;
> + goto err_out;
> }
>
> param = BD_DONE | BD_EXTD | BD_CONT;
> --
> 2.11.0
>
--
~Vinod
