Hi Marek,
Also, this patch need to fix the patch subject as following:
- max88743 -> max77843
If you fix the subject, feel free to add my acked-tag.
Acked-by: Chanwoo Choi <cw00.c...@samsung.com>
After finishing the review from MFD maintainer, I'll merge them.
Regards,
Chanwoo Choi
On 2017년 10월 18일 18:28, Marek Szyprowski wrote:
> SmartDock uses ADC_RESERVED_ACC_3 (0x10) ADC ID type and provides following
> features:
> 1. USB host with embedded USB hub (2-4 ports) for mice, keyboard, etc,
> 2. MHL for video output,
> 3. charging.
>
> Tested with Unitek Y-2165 MHL+OTG Hub Smart Phone Dock.
>
> Signed-off-by: Marek Szyprowski <m.szyprow...@samsung.com>
> ---
> drivers/extcon/extcon-max77843.c | 77
> +++++++++++++++++++++++++++++-------
> include/linux/mfd/max77843-private.h | 2 +
> 2 files changed, 65 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/extcon/extcon-max77843.c
> b/drivers/extcon/extcon-max77843.c
> index 217c743405f8..cc28d2622ae7 100644
> --- a/drivers/extcon/extcon-max77843.c
> +++ b/drivers/extcon/extcon-max77843.c
> @@ -80,7 +80,7 @@ enum max77843_muic_accessory_type {
> MAX77843_MUIC_ADC_REMOTE_S12_BUTTON,
> MAX77843_MUIC_ADC_RESERVED_ACC_1,
> MAX77843_MUIC_ADC_RESERVED_ACC_2,
> - MAX77843_MUIC_ADC_RESERVED_ACC_3,
> + MAX77843_MUIC_ADC_RESERVED_ACC_3, /* SmartDock */
> MAX77843_MUIC_ADC_RESERVED_ACC_4,
> MAX77843_MUIC_ADC_RESERVED_ACC_5,
> MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2,
> @@ -119,6 +119,7 @@ enum max77843_muic_charger_type {
> MAX77843_MUIC_CHG_SPECIAL_BIAS,
> MAX77843_MUIC_CHG_RESERVED,
> MAX77843_MUIC_CHG_GND,
> + MAX77843_MUIC_CHG_DOCK,
> };
>
> static const unsigned int max77843_extcon_cable[] = {
> @@ -130,6 +131,7 @@ static const unsigned int max77843_extcon_cable[] = {
> EXTCON_CHG_USB_FAST,
> EXTCON_CHG_USB_SLOW,
> EXTCON_DISP_MHL,
> + EXTCON_DOCK,
> EXTCON_JIG,
> EXTCON_NONE,
> };
> @@ -200,7 +202,7 @@ static const struct regmap_irq_chip
> max77843_muic_irq_chip = {
> };
>
> static int max77843_muic_set_path(struct max77843_muic_info *info,
> - u8 val, bool attached)
> + u8 val, bool attached, bool nobccomp)
> {
> struct max77693_dev *max77843 = info->max77843;
> int ret = 0;
> @@ -210,10 +212,16 @@ static int max77843_muic_set_path(struct
> max77843_muic_info *info,
> ctrl1 = val;
> else
> ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN;
> + if (nobccomp) {
> + /* Disable BC1.2 protocol and force manual switch control */
> + ctrl1 |= MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK;
> + }
>
> ret = regmap_update_bits(max77843->regmap_muic,
> MAX77843_MUIC_REG_CONTROL1,
> - MAX77843_MUIC_CONTROL1_COM_SW, ctrl1);
> + MAX77843_MUIC_CONTROL1_COM_SW |
> + MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK,
> + ctrl1);
> if (ret < 0) {
> dev_err(info->dev, "Cannot switch MUIC port\n");
> return ret;
> @@ -303,6 +311,19 @@ static int max77843_muic_get_cable_type(struct
> max77843_muic_info *info,
> break;
> }
>
> + if (adc == MAX77843_MUIC_ADC_RESERVED_ACC_3) { /* SmartDock */
> + if (chg_type == MAX77843_MUIC_CHG_NONE) {
> + *attached = false;
> + cable_type = info->prev_chg_type;
> + info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
> + } else {
> + *attached = true;
> + cable_type = MAX77843_MUIC_CHG_DOCK;
> + info->prev_chg_type = MAX77843_MUIC_CHG_DOCK;
> + }
> + break;
> + }
> +
> if (chg_type == MAX77843_MUIC_CHG_NONE) {
> *attached = false;
> cable_type = info->prev_chg_type;
> @@ -365,7 +386,7 @@ static int max77843_muic_adc_gnd_handler(struct
> max77843_muic_info *info)
> case MAX77843_MUIC_GND_USB_HOST_VB:
> ret = max77843_muic_set_path(info,
> MAX77843_MUIC_CONTROL1_SW_USB,
> - attached);
> + attached, false);
> if (ret < 0)
> return ret;
>
> @@ -376,7 +397,7 @@ static int max77843_muic_adc_gnd_handler(struct
> max77843_muic_info *info)
> case MAX77843_MUIC_GND_MHL:
> ret = max77843_muic_set_path(info,
> MAX77843_MUIC_CONTROL1_SW_OPEN,
> - attached);
> + attached, false);
> if (ret < 0)
> return ret;
>
> @@ -412,7 +433,7 @@ static int max77843_muic_jig_handler(struct
> max77843_muic_info *info,
> return -EINVAL;
> }
>
> - ret = max77843_muic_set_path(info, path, attached);
> + ret = max77843_muic_set_path(info, path, attached, false);
> if (ret < 0)
> return ret;
>
> @@ -421,6 +442,26 @@ static int max77843_muic_jig_handler(struct
> max77843_muic_info *info,
> return 0;
> }
>
> +static int max77843_muic_dock_handler(struct max77843_muic_info *info,
> + bool attached)
> +{
> + int ret;
> +
> + dev_dbg(info->dev, "external connector is %s (adc: 0x10)\n",
> + attached ? "attached" : "detached");
> +
> + ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_USB,
> + attached, attached);
> + if (ret < 0)
> + return ret;
> +
> + extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
> + extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
> + extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
> +
> + return 0;
> +}
> +
> static int max77843_muic_adc_handler(struct max77843_muic_info *info)
> {
> int ret, cable_type;
> @@ -435,6 +476,11 @@ static int max77843_muic_adc_handler(struct
> max77843_muic_info *info)
> info->prev_cable_type);
>
> switch (cable_type) {
> + case MAX77843_MUIC_ADC_RESERVED_ACC_3: /* SmartDock */
> + ret = max77843_muic_dock_handler(info, attached);
> + if (ret < 0)
> + return ret;
> + break;
> case MAX77843_MUIC_ADC_GROUND:
> ret = max77843_muic_adc_gnd_handler(info);
> if (ret < 0)
> @@ -462,7 +508,6 @@ static int max77843_muic_adc_handler(struct
> max77843_muic_info *info)
> case MAX77843_MUIC_ADC_REMOTE_S12_BUTTON:
> case MAX77843_MUIC_ADC_RESERVED_ACC_1:
> case MAX77843_MUIC_ADC_RESERVED_ACC_2:
> - case MAX77843_MUIC_ADC_RESERVED_ACC_3:
> case MAX77843_MUIC_ADC_RESERVED_ACC_4:
> case MAX77843_MUIC_ADC_RESERVED_ACC_5:
> case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2:
> @@ -506,7 +551,7 @@ static int max77843_muic_chg_handler(struct
> max77843_muic_info *info)
> case MAX77843_MUIC_CHG_USB:
> ret = max77843_muic_set_path(info,
> MAX77843_MUIC_CONTROL1_SW_USB,
> - attached);
> + attached, false);
> if (ret < 0)
> return ret;
>
> @@ -517,7 +562,7 @@ static int max77843_muic_chg_handler(struct
> max77843_muic_info *info)
> case MAX77843_MUIC_CHG_DOWNSTREAM:
> ret = max77843_muic_set_path(info,
> MAX77843_MUIC_CONTROL1_SW_OPEN,
> - attached);
> + attached, false);
> if (ret < 0)
> return ret;
>
> @@ -527,7 +572,7 @@ static int max77843_muic_chg_handler(struct
> max77843_muic_info *info)
> case MAX77843_MUIC_CHG_DEDICATED:
> ret = max77843_muic_set_path(info,
> MAX77843_MUIC_CONTROL1_SW_OPEN,
> - attached);
> + attached, false);
> if (ret < 0)
> return ret;
>
> @@ -537,7 +582,7 @@ static int max77843_muic_chg_handler(struct
> max77843_muic_info *info)
> case MAX77843_MUIC_CHG_SPECIAL_500MA:
> ret = max77843_muic_set_path(info,
> MAX77843_MUIC_CONTROL1_SW_OPEN,
> - attached);
> + attached, false);
> if (ret < 0)
> return ret;
>
> @@ -547,7 +592,7 @@ static int max77843_muic_chg_handler(struct
> max77843_muic_info *info)
> case MAX77843_MUIC_CHG_SPECIAL_1A:
> ret = max77843_muic_set_path(info,
> MAX77843_MUIC_CONTROL1_SW_OPEN,
> - attached);
> + attached, false);
> if (ret < 0)
> return ret;
>
> @@ -566,6 +611,9 @@ static int max77843_muic_chg_handler(struct
> max77843_muic_info *info)
> extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
> false);
> break;
> + case MAX77843_MUIC_CHG_DOCK:
> + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, attached);
> + break;
> case MAX77843_MUIC_CHG_NONE:
> break;
> default:
> @@ -574,7 +622,7 @@ static int max77843_muic_chg_handler(struct
> max77843_muic_info *info)
> attached ? "attached" : "detached", chg_type);
>
> max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN,
> - attached);
> + attached, false);
> return -EINVAL;
> }
>
> @@ -814,7 +862,8 @@ static int max77843_muic_probe(struct platform_device
> *pdev)
> max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
>
> /* Set initial path for UART */
> - max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true);
> + max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true,
> + false);
>
> /* Check revision number of MUIC device */
> ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
> diff --git a/include/linux/mfd/max77843-private.h
> b/include/linux/mfd/max77843-private.h
> index 0223cd5941c8..b8908bf8d315 100644
> --- a/include/linux/mfd/max77843-private.h
> +++ b/include/linux/mfd/max77843-private.h
> @@ -350,6 +350,7 @@ enum max77843_irq_muic {
> /* MAX77843 CONTROL register */
> #define MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT 0
> #define MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT 3
> +#define MAX77843_MUIC_CONTROL1_NOBCCOMP_SHIFT 6
> #define MAX77843_MUIC_CONTROL1_IDBEN_SHIFT 7
> #define MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT 0
> #define MAX77843_MUIC_CONTROL2_ADCEN_SHIFT 1
> @@ -366,6 +367,7 @@ enum max77843_irq_muic {
> #define MAX77843_MUIC_CONTROL1_COMP1SW_MASK (0x7 <<
> MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT)
> #define MAX77843_MUIC_CONTROL1_COMP2SW_MASK (0x7 <<
> MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT)
> #define MAX77843_MUIC_CONTROL1_IDBEN_MASK
> BIT(MAX77843_MUIC_CONTROL1_IDBEN_SHIFT)
> +#define MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK
> BIT(MAX77843_MUIC_CONTROL1_NOBCCOMP_SHIFT)
> #define MAX77843_MUIC_CONTROL2_LOWPWR_MASK
> BIT(MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT)
> #define MAX77843_MUIC_CONTROL2_ADCEN_MASK
> BIT(MAX77843_MUIC_CONTROL2_ADCEN_SHIFT)
> #define MAX77843_MUIC_CONTROL2_CPEN_MASK
> BIT(MAX77843_MUIC_CONTROL2_CPEN_SHIFT)
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
