The TSI channel, which is usually used for touchscreen support, but can
be used as 4 general purpose ADCs. When used as a touchscreen interface
the touchscreen driver switches the device into 1ms sampling mode (rather
than the default 10ms economy mode) as recommended by the manufacturer.
When using the TSI channels as a general purpose ADC we are currently not
doing this and testing suggests that this can result in ADC timeouts:
[ 5827.198289] da9052 spi2.0: timeout waiting for ADC conversion interrupt
[ 5827.728293] da9052 spi2.0: timeout waiting for ADC conversion interrupt
[ 5993.808335] da9052 spi2.0: timeout waiting for ADC conversion interrupt
[ 5994.328441] da9052 spi2.0: timeout waiting for ADC conversion interrupt
[ 5994.848291] da9052 spi2.0: timeout waiting for ADC conversion interrupt
Switching to the 1ms timing resolves this issue.
Cc: sta...@vger.kernel.org
Signed-off-by: Martyn Welch <martyn.we...@collabora.co.uk>
---
drivers/hwmon/da9052-hwmon.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/hwmon/da9052-hwmon.c b/drivers/hwmon/da9052-hwmon.c
index 97a62f5..a973eb6 100644
--- a/drivers/hwmon/da9052-hwmon.c
+++ b/drivers/hwmon/da9052-hwmon.c
@@ -477,6 +477,11 @@ static int da9052_hwmon_probe(struct platform_device *pdev)
/* disable touchscreen features */
da9052_reg_write(hwmon->da9052, DA9052_TSI_CONT_A_REG, 0x00);
+ /* Sample every 1ms */
+ da9052_reg_update(hwmon->da9052, DA9052_ADC_CONT_REG,
+ DA9052_ADCCONT_ADCMODE,
+ DA9052_ADCCONT_ADCMODE);
+
err = da9052_request_irq(hwmon->da9052, DA9052_IRQ_TSIREADY,
"tsiready-irq", da9052_tsi_datardy_irq,
hwmon);
--
1.8.3.1
