On 21/09/2017 19:16, Jerome Brunet wrote:
> TEST_N gpio has been moved so the gpio-line-names of the cc
> must be adjusted accordingly
>
> Signed-off-by: Jerome Brunet <jbru...@baylibre.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
> b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
> index 69ca14ac10fa..3e9b9c8b72f0 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
> @@ -146,7 +146,9 @@
> "7J1 Header Pin12",
> "IR In",
> "9J3 Switch HDMI CEC/7J1 Header Pin11",
> - "7J1 Header Pin13";
> + "7J1 Header Pin13",
> + /* GPIO_TEST_N */
> + "7J1 Header Pin15";
> };
>
> &pinctrl_periphs {
> @@ -188,9 +190,7 @@
> "7J1 Header Pin32", "7J1 Header Pin29",
> "7J1 Header Pin31",
> /* Bank GPIOCLK */
> - "7J1 Header Pin7", "",
> - /* GPIO_TEST_N */
> - "7J1 Header Pin15";
> + "7J1 Header Pin7", "";
> };
>
> /* SD card */
>
Reviewed-by: Neil Armstrong <narmstr...@baylibre.com>
