On Thu, 26 Oct 2017 10:00:21 +0200
SF Markus Elfring <elfr...@users.sourceforge.net> wrote:

> From: Markus Elfring <elfr...@users.sourceforge.net>
> Date: Thu, 26 Oct 2017 09:50:21 +0200
> 
> * Add jump targets so that two error messages are stored only once
>   at the end of this function implementation.
> 
> * Adjust condition checks.
> 
> This issue was detected by using the Coccinelle software.
> 
> Signed-off-by: Markus Elfring <elfr...@users.sourceforge.net>

Same issue - readability is worse than without the patch so it is always
going to be rejected.

Hence I am not going to take this or anything similar, and I doubt anyone
else in the kernel will either...

Jonathan

> ---
>  drivers/iio/light/gp2ap020a00f.c | 37 +++++++++++++++++--------------------
>  1 file changed, 17 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/iio/light/gp2ap020a00f.c 
> b/drivers/iio/light/gp2ap020a00f.c
> index 44b13fbcd093..ae29bce660ac 100644
> --- a/drivers/iio/light/gp2ap020a00f.c
> +++ b/drivers/iio/light/gp2ap020a00f.c
> @@ -741,19 +741,13 @@ static bool gp2ap020a00f_adjust_lux_mode(struct 
> gp2ap020a00f_data *data,
>                */
>               err =  gp2ap020a00f_write_event_threshold(data,
>                                       GP2AP020A00F_THRESH_TH, false);
> -             if (err < 0) {
> -                     dev_err(&data->client->dev,
> -                             "Clearing als threshold register failed.\n");
> -                     return false;
> -             }
> +             if (err)
> +                     goto report_clearing_failure;
>  
>               err =  gp2ap020a00f_write_event_threshold(data,
>                                       GP2AP020A00F_THRESH_TL, false);
> -             if (err < 0) {
> -                     dev_err(&data->client->dev,
> -                             "Clearing als threshold register failed.\n");
> -                     return false;
> -             }
> +             if (err)
> +                     goto report_clearing_failure;
>  
>               /* Change lux mode */
>               err = regmap_update_bits(data->regmap,
> @@ -793,27 +787,30 @@ static bool gp2ap020a00f_adjust_lux_mode(struct 
> gp2ap020a00f_data *data,
>               if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags)) {
>                       err =  gp2ap020a00f_write_event_threshold(data,
>                                       GP2AP020A00F_THRESH_TH, true);
> -                     if (err < 0) {
> -                             dev_err(&data->client->dev,
> -                             "Adjusting als threshold value failed.\n");
> -                             return false;
> -                     }
> +                     if (err)
> +                             goto report_adjustment_failure;
>               }
>  
>               if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags)) {
>                       err =  gp2ap020a00f_write_event_threshold(data,
>                                       GP2AP020A00F_THRESH_TL, true);
> -                     if (err < 0) {
> -                             dev_err(&data->client->dev,
> -                             "Adjusting als threshold value failed.\n");
> -                             return false;
> -                     }
> +                     if (err)
> +                             goto report_adjustment_failure;
>               }
>  
>               return true;
>       }
>  
>       return false;
> +
> +report_clearing_failure:
> +     dev_err(&data->client->dev,
> +             "Clearing als threshold register failed.\n");
> +     return false;
> +
> +report_adjustment_failure:
> +     dev_err(&data->client->dev, "Adjusting als threshold value failed.\n");
> +     return false;
>  }
>  
>  static void gp2ap020a00f_output_to_lux(struct gp2ap020a00f_data *data,

Reply via email to