Document a "reset" and "assert-reset-us", it can be used for driver control reset property. And reuse post-power-on-delay-ms for deassert reset delay.
Signed-off-by: Lin Huang <h...@rock-chips.com> --- Documentation/devicetree/bindings/input/hid-over-i2c.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt index 28e8bd8..6ab0eed 100644 --- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt +++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt @@ -31,7 +31,9 @@ device-specific compatible properties, which should be used in addition to the - vdd-supply: phandle of the regulator that provides the supply voltage. - post-power-on-delay-ms: time required by the device after enabling its regulators - before it is ready for communication. Must be used with 'vdd-supply'. + or deassert reset pin before it is ready for communication. +- reset: phandle of the gpio that provides for hid reset pin. +- assert-reset-us: the device require reset assert time. Example: -- 2.7.4
