* Added support for translating the SGLs associated with incoming
commands either to IEE SGL or NVMe PRPs for NVMe devices.
* The hardware translation of IEEE SGL to NVMe PRPs has limitation
and if a command cannot be translated by hardware then it will go
to firmware and the firmware needs to translate it. And this will
have a performance reduction. To avoid that driver proactively
checks whether the translation will be done in hardware or not,
if not then driver try to translate inside the driver.
Signed-off-by: Chaitra P B <chaitra.basa...@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subram...@broadcom.com>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 339 ++++++++++++++++++++++++++++++-
drivers/scsi/mpt3sas/mpt3sas_base.h | 41 +++-
drivers/scsi/mpt3sas/mpt3sas_ctl.c | 1 +
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 14 +-
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c | 2 +-
5 files changed, 380 insertions(+), 17 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c
b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 11c6afe..1ad3cbb 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -59,6 +59,7 @@
#include <linux/time.h>
#include <linux/ktime.h>
#include <linux/kthread.h>
+#include <asm/page.h> /* To get host page size per arch */
#include <linux/aer.h>
@@ -1344,7 +1345,218 @@ _base_build_sg(struct MPT3SAS_ADAPTER *ioc, void *psge,
}
}
-/* IEEE format sgls */
+/**
+ * base_make_prp_nvme -
+ * Prepare PRPs(Physical Region Page)- SGLs specific to NVMe drives only
+ *
+ * @ioc: per adapter object
+ * @scmd: SCSI command from the mid-layer
+ * @mpi_request: mpi request
+ * @smid: msg Index
+ * @sge_count: scatter gather element count.
+ *
+ * Returns: true: PRPs are built
+ * false: IEEE SGLs needs to be built
+ */
+void
+base_make_prp_nvme(struct MPT3SAS_ADAPTER *ioc,
+ struct scsi_cmnd *scmd,
+ Mpi25SCSIIORequest_t *mpi_request,
+ u16 smid, int sge_count)
+{
+ int sge_len, offset, num_prp_in_chain = 0;
+ Mpi25IeeeSgeChain64_t *main_chain_element, *ptr_first_sgl;
+ u64 *curr_buff;
+ dma_addr_t msg_phys;
+ u64 sge_addr;
+ u32 page_mask, page_mask_result;
+ struct scatterlist *sg_scmd;
+ u32 first_prp_len;
+ int data_len = scsi_bufflen(scmd);
+ u32 nvme_pg_size;
+
+ nvme_pg_size = max_t(u32, ioc->page_size, NVME_PRP_PAGE_SIZE);
+ /*
+ * Nvme has a very convoluted prp format. One prp is required
+ * for each page or partial page. Driver need to split up OS sg_list
+ * entries if it is longer than one page or cross a page
+ * boundary. Driver also have to insert a PRP list pointer entry as
+ * the last entry in each physical page of the PRP list.
+ *
+ * NOTE: The first PRP "entry" is actually placed in the first
+ * SGL entry in the main message as IEEE 64 format. The 2nd
+ * entry in the main message is the chain element, and the rest
+ * of the PRP entries are built in the contiguous pcie buffer.
+ */
+ page_mask = nvme_pg_size - 1;
+
+ /*
+ * Native SGL is needed.
+ * Put a chain element in main message frame that points to the first
+ * chain buffer.
+ *
+ * NOTE: The ChainOffset field must be 0 when using a chain pointer to
+ * a native SGL.
+ */
+
+ /* Set main message chain element pointer */
+ main_chain_element = (pMpi25IeeeSgeChain64_t)&mpi_request->SGL;
+ /*
+ * For NVMe the chain element needs to be the 2nd SG entry in the main
+ * message.
+ */
+ main_chain_element = (Mpi25IeeeSgeChain64_t *)
+ ((u8 *)main_chain_element + sizeof(MPI25_IEEE_SGE_CHAIN64));
+
+ /*
+ * For the PRP entries, use the specially allocated buffer of
+ * contiguous memory. Normal chain buffers can't be used
+ * because each chain buffer would need to be the size of an OS
+ * page (4k).
+ */
+ curr_buff = mpt3sas_base_get_pcie_sgl(ioc, smid);
+ msg_phys = (dma_addr_t)mpt3sas_base_get_pcie_sgl_dma(ioc, smid);
+
+ main_chain_element->Address = cpu_to_le64(msg_phys);
+ main_chain_element->NextChainOffset = 0;
+ main_chain_element->Flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT |
+ MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR |
+ MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP;
+
+ /* Build first prp, sge need not to be page aligned*/
+ ptr_first_sgl = (pMpi25IeeeSgeChain64_t)&mpi_request->SGL;
+ sg_scmd = scsi_sglist(scmd);
+ sge_addr = sg_dma_address(sg_scmd);
+ sge_len = sg_dma_len(sg_scmd);
+
+ offset = (u32)(sge_addr & page_mask);
+ first_prp_len = nvme_pg_size - offset;
+
+ ptr_first_sgl->Address = cpu_to_le64(sge_addr);
+ ptr_first_sgl->Length = cpu_to_le32(first_prp_len);
+
+ data_len -= first_prp_len;
+
+ if (sge_len > first_prp_len) {
+ sge_addr += first_prp_len;
+ sge_len -= first_prp_len;
+ } else if (data_len && (sge_len == first_prp_len)) {
+ sg_scmd = sg_next(sg_scmd);
+ sge_addr = sg_dma_address(sg_scmd);
+ sge_len = sg_dma_len(sg_scmd);
+ }
+
+ for (;;) {
+ offset = (u32)(sge_addr & page_mask);
+
+ /* Put PRP pointer due to page boundary*/
+ page_mask_result = (uintptr_t)(curr_buff + 1) & page_mask;
+ if (unlikely(!page_mask_result)) {
+ scmd_printk(KERN_NOTICE,
+ scmd, "page boundary curr_buff: 0x%p\n",
+ curr_buff);
+ msg_phys += 8;
+ *curr_buff = cpu_to_le64(msg_phys);
+ curr_buff++;
+ num_prp_in_chain++;
+ }
+
+ *curr_buff = cpu_to_le64(sge_addr);
+ curr_buff++;
+ msg_phys += 8;
+ num_prp_in_chain++;
+
+ sge_addr += nvme_pg_size;
+ sge_len -= nvme_pg_size;
+ data_len -= nvme_pg_size;
+
+ if (data_len <= 0)
+ break;
+
+ if (sge_len > 0)
+ continue;
+
+ sg_scmd = sg_next(sg_scmd);
+ sge_addr = sg_dma_address(sg_scmd);
+ sge_len = sg_dma_len(sg_scmd);
+ }
+
+ main_chain_element->Length =
+ cpu_to_le32(num_prp_in_chain * sizeof(u64));
+ return;
+}
+
+static bool
+base_is_prp_possible(struct MPT3SAS_ADAPTER *ioc,
+ struct _pcie_device *pcie_device, struct scsi_cmnd *scmd, int sge_count)
+{
+ u32 data_length = 0;
+ struct scatterlist *sg_scmd;
+ bool build_prp = true;
+
+ data_length = cpu_to_le32(scsi_bufflen(scmd));
+ sg_scmd = scsi_sglist(scmd);
+
+ /* If Datalenth is <= 16K and number of SGE???s entries are <= 2
+ * we built IEEE SGL
+ */
+ if ((data_length <= NVME_PRP_PAGE_SIZE*4) && (sge_count <= 2))
+ build_prp = false;
+
+ return build_prp;
+}
+
+/**
+ * _base_check_pcie_native_sgl - This function is called for PCIe end devices
to
+ * determine if the driver needs to build a native SGL. If so, that native
+ * SGL is built in the special contiguous buffers allocated especially for
+ * PCIe SGL creation. If the driver will not build a native SGL, return
+ * TRUE and a normal IEEE SGL will be built. Currently this routine
+ * supports NVMe.
+ * @ioc: per adapter object
+ * @mpi_request: mf request pointer
+ * @smid: system request message index
+ * @scmd: scsi command
+ * @pcie_device: points to the PCIe device's info
+ *
+ * Returns 0 if native SGL was built, 1 if no SGL was built
+ */
+static int
+_base_check_pcie_native_sgl(struct MPT3SAS_ADAPTER *ioc,
+ Mpi25SCSIIORequest_t *mpi_request, u16 smid, struct scsi_cmnd *scmd,
+ struct _pcie_device *pcie_device)
+{
+ struct scatterlist *sg_scmd;
+ int sges_left;
+
+ /* Get the SG list pointer and info. */
+ sg_scmd = scsi_sglist(scmd);
+ sges_left = scsi_dma_map(scmd);
+ if (sges_left < 0) {
+ sdev_printk(KERN_ERR, scmd->device,
+ "scsi_dma_map failed: request for %d bytes!\n",
+ scsi_bufflen(scmd));
+ return 1;
+ }
+
+ /* Check if we need to build a native SG list. */
+ if (base_is_prp_possible(ioc, pcie_device,
+ scmd, sges_left) == 0) {
+ /* We built a native SG list, just return. */
+ goto out;
+ }
+
+ /*
+ * Build native NVMe PRP.
+ */
+ base_make_prp_nvme(ioc, scmd, mpi_request,
+ smid, sges_left);
+
+ return 0;
+out:
+ scsi_dma_unmap(scmd);
+ return 1;
+}
/**
* _base_add_sg_single_ieee - add sg element for IEEE format
@@ -1391,9 +1603,11 @@ _base_build_zero_len_sge_ieee(struct MPT3SAS_ADAPTER
*ioc, void *paddr)
/**
* _base_build_sg_scmd - main sg creation routine
+ * pcie_device is unused here!
* @ioc: per adapter object
* @scmd: scsi command
* @smid: system request message index
+ * @unused: unused pcie_device pointer
* Context: none.
*
* The main routine that builds scatter gather table from a given
@@ -1403,7 +1617,7 @@ _base_build_zero_len_sge_ieee(struct MPT3SAS_ADAPTER
*ioc, void *paddr)
*/
static int
_base_build_sg_scmd(struct MPT3SAS_ADAPTER *ioc,
- struct scsi_cmnd *scmd, u16 smid)
+ struct scsi_cmnd *scmd, u16 smid, struct _pcie_device *unused)
{
Mpi2SCSIIORequest_t *mpi_request;
dma_addr_t chain_dma;
@@ -1537,6 +1751,8 @@ _base_build_sg_scmd(struct MPT3SAS_ADAPTER *ioc,
* @ioc: per adapter object
* @scmd: scsi command
* @smid: system request message index
+ * @pcie_device: Pointer to pcie_device. If set, the pcie native sgl will be
+ * constructed on need.
* Context: none.
*
* The main routine that builds scatter gather table from a given
@@ -1546,9 +1762,9 @@ _base_build_sg_scmd(struct MPT3SAS_ADAPTER *ioc,
*/
static int
_base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc,
- struct scsi_cmnd *scmd, u16 smid)
+ struct scsi_cmnd *scmd, u16 smid, struct _pcie_device *pcie_device)
{
- Mpi2SCSIIORequest_t *mpi_request;
+ Mpi25SCSIIORequest_t *mpi_request;
dma_addr_t chain_dma;
struct scatterlist *sg_scmd;
void *sg_local, *chain;
@@ -1571,6 +1787,13 @@ _base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc,
chain_sgl_flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT |
MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+ /* Check if we need to build a native SG list. */
+ if ((pcie_device) && (_base_check_pcie_native_sgl(ioc, mpi_request,
+ smid, scmd, pcie_device) == 0)) {
+ /* We built a native SG list, just return. */
+ return 0;
+ }
+
sg_scmd = scsi_sglist(scmd);
sges_left = scsi_dma_map(scmd);
if (sges_left < 0) {
@@ -1582,12 +1805,12 @@ _base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc,
sg_local = &mpi_request->SGL;
sges_in_segment = (ioc->request_sz -
- offsetof(Mpi2SCSIIORequest_t, SGL))/ioc->sge_size_ieee;
+ offsetof(Mpi25SCSIIORequest_t, SGL))/ioc->sge_size_ieee;
if (sges_left <= sges_in_segment)
goto fill_in_last_segment;
mpi_request->ChainOffset = (sges_in_segment - 1 /* chain element */) +
- (offsetof(Mpi2SCSIIORequest_t, SGL)/ioc->sge_size_ieee);
+ (offsetof(Mpi25SCSIIORequest_t, SGL)/ioc->sge_size_ieee);
/* fill in main message segment when there is a chain following */
while (sges_in_segment > 1) {
@@ -2267,6 +2490,33 @@ mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER
*ioc, u16 smid)
}
/**
+ * mpt3sas_base_get_pcie_sgl - obtain a PCIe SGL virt addr
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns virt pointer to a PCIe SGL.
+ */
+void *
+mpt3sas_base_get_pcie_sgl(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ return (void *)(ioc->scsi_lookup[smid - 1].pcie_sg_list.pcie_sgl);
+}
+
+/**
+ * mpt3sas_base_get_pcie_sgl_dma - obtain a PCIe SGL dma addr
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns phys pointer to the address of the PCIe buffer.
+ */
+void *
+mpt3sas_base_get_pcie_sgl_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ return (void *)(uintptr_t)
+ (ioc->scsi_lookup[smid - 1].pcie_sg_list.pcie_sgl_dma);
+}
+
+/**
* mpt3sas_base_get_reply_virt_addr - obtain reply frames virt address
* @ioc: per adapter object
* @phys_addr: lower 32 physical addr of the reply
@@ -2945,6 +3195,11 @@ _base_display_ioc_capabilities(struct MPT3SAS_ADAPTER
*ioc)
_base_display_OEMs_branding(ioc);
+ if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES) {
+ pr_info("%sNVMe", i ? "," : "");
+ i++;
+ }
+
pr_info(MPT3SAS_FMT "Protocol=(", ioc->name);
if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) {
@@ -3245,6 +3500,17 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
kfree(ioc->reply_post);
}
+ if (ioc->pcie_sgl_dma_pool) {
+ for (i = 0; i < ioc->scsiio_depth; i++) {
+ if (ioc->scsi_lookup[i].pcie_sg_list.pcie_sgl)
+ pci_pool_free(ioc->pcie_sgl_dma_pool,
+ ioc->scsi_lookup[i].pcie_sg_list.pcie_sgl,
+ ioc->scsi_lookup[i].pcie_sg_list.pcie_sgl_dma);
+ }
+ if (ioc->pcie_sgl_dma_pool)
+ pci_pool_destroy(ioc->pcie_sgl_dma_pool);
+ }
+
if (ioc->config_page) {
dexitprintk(ioc, pr_info(MPT3SAS_FMT
"config_page(0x%p): free\n", ioc->name,
@@ -3286,7 +3552,7 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
u16 chains_needed_per_io;
u32 sz, total_sz, reply_post_free_sz;
u32 retry_sz;
- u16 max_request_credit;
+ u16 max_request_credit, nvme_blocks_needed;
unsigned short sg_tablesize;
u16 sge_size;
int i;
@@ -3630,7 +3896,52 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
"internal(0x%p): depth(%d), start smid(%d)\n",
ioc->name, ioc->internal,
ioc->internal_depth, ioc->internal_smid));
+ /*
+ * The number of NVMe page sized blocks needed is:
+ * (((sg_tablesize * 8) - 1) / (page_size - 8)) + 1
+ * ((sg_tablesize * 8) - 1) is the max PRP's minus the first PRP entry
+ * that is placed in the main message frame. 8 is the size of each PRP
+ * entry or PRP list pointer entry. 8 is subtracted from page_size
+ * because of the PRP list pointer entry at the end of a page, so this
+ * is not counted as a PRP entry. The 1 added page is a round up.
+ *
+ * To avoid allocation failures due to the amount of memory that could
+ * be required for NVMe PRP's, only each set of NVMe blocks will be
+ * contiguous, so a new set is allocated for each possible I/O.
+ */
+ if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES) {
+ nvme_blocks_needed =
+ (ioc->shost->sg_tablesize * NVME_PRP_SIZE) - 1;
+ nvme_blocks_needed /= (ioc->page_size - NVME_PRP_SIZE);
+ nvme_blocks_needed++;
+
+ sz = nvme_blocks_needed * ioc->page_size;
+ ioc->pcie_sgl_dma_pool =
+ pci_pool_create("PCIe SGL pool", ioc->pdev, sz, 16, 0);
+ if (!ioc->pcie_sgl_dma_pool) {
+ pr_info(MPT3SAS_FMT
+ "PCIe SGL pool: pci_pool_create failed\n",
+ ioc->name);
+ goto out;
+ }
+ for (i = 0; i < ioc->scsiio_depth; i++) {
+ ioc->scsi_lookup[i].pcie_sg_list.pcie_sgl =
+ pci_pool_alloc(ioc->pcie_sgl_dma_pool,
+ GFP_KERNEL,
+ &ioc->scsi_lookup[i].pcie_sg_list.pcie_sgl_dma);
+ if (!ioc->scsi_lookup[i].pcie_sg_list.pcie_sgl) {
+ pr_info(MPT3SAS_FMT
+ "PCIe SGL pool: pci_pool_alloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ }
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "PCIe sgl pool depth(%d), "
+ "element_size(%d), pool_size(%d kB)\n", ioc->name,
+ ioc->scsiio_depth, sz, (sz * ioc->scsiio_depth)/1024));
+ total_sz += sz * ioc->scsiio_depth;
+ }
/* sense buffers, 4 byte align */
sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE;
ioc->sense_dma_pool = dma_pool_create("sense pool", &ioc->pdev->dev, sz,
@@ -4475,6 +4786,19 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc)
le16_to_cpu(mpi_reply.HighPriorityCredit);
facts->ReplyFrameSize = mpi_reply.ReplyFrameSize;
facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle);
+ facts->CurrentHostPageSize = mpi_reply.CurrentHostPageSize;
+
+ /*
+ * Get the Page Size from IOC Facts. If it's 0, default to 4k.
+ */
+ ioc->page_size = 1 << facts->CurrentHostPageSize;
+ if (ioc->page_size == 1) {
+ pr_info(MPT3SAS_FMT "CurrentHostPageSize is 0: Setting "
+ "default host page size to 4k\n", ioc->name);
+ ioc->page_size = 1 << MPT3SAS_HOST_PAGE_SIZE_4K;
+ }
+ dinitprintk(ioc, pr_info(MPT3SAS_FMT "CurrentHostPageSize(%d)\n",
+ ioc->name, facts->CurrentHostPageSize));
dinitprintk(ioc, pr_info(MPT3SAS_FMT
"hba queue depth(%d), max chains per io(%d)\n",
@@ -4514,6 +4838,7 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc)
mpi_request.VP_ID = 0;
mpi_request.MsgVersion = cpu_to_le16(ioc->hba_mpi_version_belonged);
mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
+ mpi_request.HostPageSize = MPT3SAS_HOST_PAGE_SIZE_4K;
if (_base_is_controller_msix_enabled(ioc))
mpi_request.HostMSIxVectors = ioc->reply_queue_count;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h
b/drivers/scsi/mpt3sas/mpt3sas_base.h
index dd04a28..4758729 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -54,6 +54,7 @@
#include "mpi/mpi2_raid.h"
#include "mpi/mpi2_tool.h"
#include "mpi/mpi2_sas.h"
+#include "mpi/mpi2_pci.h"
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
@@ -115,6 +116,7 @@
#define MPT3SAS_KDUMP_SCSI_IO_DEPTH 200
#define MPT3SAS_RAID_MAX_SECTORS 8192
+#define MPT3SAS_HOST_PAGE_SIZE_4K 12
#define MPT_NAME_LENGTH 32 /* generic length of
strings */
#define MPT_STRING_LENGTH 64
@@ -133,6 +135,15 @@
#define DEFAULT_NUM_FWCHAIN_ELEMTS 8
/*
+ * NVMe defines
+ */
+#define NVME_PRP_SIZE 8 /* PRP size */
+#define NVME_CMD_PRP1_OFFSET 24 /* PRP1 offset in NVMe
cmd */
+#define NVME_CMD_PRP2_OFFSET 32 /* PRP2 offset in NVMe
cmd */
+#define NVME_ERROR_RESPONSE_SIZE 16 /* Max NVME Error
Response */
+#define NVME_PRP_PAGE_SIZE 4096 /* Page size */
+
+/*
* reset phases
*/
#define MPT3_IOC_PRE_RESET 1 /* prior to host reset */
@@ -737,6 +748,16 @@ enum reset_type {
};
/**
+ * struct pcie_sg_list - PCIe SGL buffer (contiguous per I/O)
+ * @pcie_sgl: PCIe native SGL for NVMe devices
+ * @pcie_sgl_dma: physical address
+ */
+struct pcie_sg_list {
+ void *pcie_sgl;
+ dma_addr_t pcie_sgl_dma;
+};
+
+/**
* struct chain_tracker - firmware chain tracker
* @chain_buffer: chain buffer
* @chain_buffer_dma: physical address
@@ -762,6 +783,7 @@ struct scsiio_tracker {
struct scsi_cmnd *scmd;
u8 cb_idx;
u8 direct_io;
+ struct pcie_sg_list pcie_sg_list;
struct list_head chain_list;
struct list_head tracker_list;
u16 msix_io;
@@ -835,13 +857,19 @@ typedef void (*MPT_ADD_SGE)(void *paddr, u32
flags_length, dma_addr_t dma_addr);
/* SAS3.0 support */
typedef int (*MPT_BUILD_SG_SCMD)(struct MPT3SAS_ADAPTER *ioc,
- struct scsi_cmnd *scmd, u16 smid);
+ struct scsi_cmnd *scmd, u16 smid, struct _pcie_device *pcie_device);
typedef void (*MPT_BUILD_SG)(struct MPT3SAS_ADAPTER *ioc, void *psge,
dma_addr_t data_out_dma, size_t data_out_sz,
dma_addr_t data_in_dma, size_t data_in_sz);
typedef void (*MPT_BUILD_ZERO_LEN_SGE)(struct MPT3SAS_ADAPTER *ioc,
void *paddr);
+/* SAS3.5 support */
+typedef void (*NVME_BUILD_PRP)(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+ Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request,
+ dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
+ size_t data_in_sz);
+
/* To support atomic and non atomic descriptors*/
typedef void (*PUT_SMID_IO_FP_HIP) (struct MPT3SAS_ADAPTER *ioc, u16 smid,
u16 funcdep);
@@ -884,6 +912,7 @@ struct mpt3sas_facts {
u16 MaxDevHandle;
u16 MaxPersistentEntries;
u16 MinDevHandle;
+ u8 CurrentHostPageSize;
};
struct mpt3sas_port_facts {
@@ -1223,6 +1252,11 @@ struct MPT3SAS_ADAPTER {
int pending_io_count;
wait_queue_head_t reset_wq;
+ /* PCIe SGL */
+ struct dma_pool *pcie_sgl_dma_pool;
+ /* Host Page Size */
+ u32 page_size;
+
/* chain */
struct chain_tracker *chain_lookup;
struct list_head free_chain_list;
@@ -1356,7 +1390,8 @@ void *mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER
*ioc, u16 smid);
void *mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid);
__le32 mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc,
u16 smid);
-
+void *mpt3sas_base_get_pcie_sgl(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+void *mpt3sas_base_get_pcie_sgl_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid);
void mpt3sas_base_sync_reply_irqs(struct MPT3SAS_ADAPTER *ioc);
/* hi-priority queue */
@@ -1570,7 +1605,7 @@ void
mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8
direct_io);
void
mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
- struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
+ struct _raid_device *raid_device, Mpi25SCSIIORequest_t *mpi_request,
u16 smid);
/* NCQ Prio Handling Check */
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index d448fed..67c7280 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -299,6 +299,7 @@ mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8
msix_index,
}
}
}
+
_ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply);
ioc->ctl_cmds.status &= ~MPT3_CMD_PENDING;
complete(&ioc->ctl_cmds.done);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 4c9b63e..51dd92c 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -4256,7 +4256,7 @@ _scsih_flush_running_cmds(struct MPT3SAS_ADAPTER *ioc)
*/
static void
_scsih_setup_eedp(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
- Mpi2SCSIIORequest_t *mpi_request)
+ Mpi25SCSIIORequest_t *mpi_request)
{
u16 eedp_flags;
unsigned char prot_op = scsi_get_prot_op(scmd);
@@ -4359,7 +4359,8 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd
*scmd)
struct _raid_device *raid_device;
struct request *rq = scmd->request;
int class;
- Mpi2SCSIIORequest_t *mpi_request;
+ Mpi25SCSIIORequest_t *mpi_request;
+ struct _pcie_device *pcie_device = NULL;
u32 mpi_control;
u16 smid;
u16 handle;
@@ -4447,7 +4448,7 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd
*scmd)
goto out;
}
mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
- memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t));
+ memset(mpi_request, 0, ioc->request_sz);
_scsih_setup_eedp(ioc, scmd, mpi_request);
if (scmd->cmd_len == 32)
@@ -4466,13 +4467,14 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd
*scmd)
mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
mpi_request->SenseBufferLowAddress =
mpt3sas_base_get_sense_buffer_dma(ioc, smid);
- mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4;
+ mpi_request->SGLOffset0 = offsetof(Mpi25SCSIIORequest_t, SGL) / 4;
int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *)
mpi_request->LUN);
memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
if (mpi_request->DataLength) {
- if (ioc->build_sg_scmd(ioc, scmd, smid)) {
+ pcie_device = sas_target_priv_data->pcie_dev;
+ if (ioc->build_sg_scmd(ioc, scmd, smid, pcie_device)) {
mpt3sas_base_free_smid(ioc, smid);
goto out;
}
@@ -4925,7 +4927,7 @@ out_unlock:
static u8
_scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
{
- Mpi2SCSIIORequest_t *mpi_request;
+ Mpi25SCSIIORequest_t *mpi_request;
Mpi2SCSIIOReply_t *mpi_reply;
struct scsi_cmnd *scmd;
u16 ioc_status;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
b/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
index 540bd50..ced7d9f 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
@@ -299,7 +299,7 @@ mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16
smid, u8 direct_io)
*/
void
mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
- struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
+ struct _raid_device *raid_device, Mpi25SCSIIORequest_t *mpi_request,
u16 smid)
{
sector_t v_lba, p_lba, stripe_off, column, io_size;
--
2.5.5
