From: Markus Elfring <elfr...@users.sourceforge.net>
Date: Thu, 2 Nov 2017 10:45:08 +0100

* Add a jump target so that a specific error message is stored only once
  at the end of this function implementation.

* Replace two calls of the function "dev_err" by goto statements.

* Adjust two condition checks.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfr...@users.sourceforge.net>
---
 drivers/rtc/rtc-ds1302.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/rtc/rtc-ds1302.c b/drivers/rtc/rtc-ds1302.c
index 0ec4be62322b..06ef64736ac3 100644
--- a/drivers/rtc/rtc-ds1302.c
+++ b/drivers/rtc/rtc-ds1302.c
@@ -132,19 +132,13 @@ static int ds1302_probe(struct spi_device *spi)
 
        addr = RTC_ADDR_CTRL << 1 | RTC_CMD_READ;
        status = spi_write_then_read(spi, &addr, sizeof(addr), buf, 1);
-       if (status < 0) {
-               dev_err(&spi->dev, "control register read error %d\n",
-                               status);
-               return status;
-       }
+       if (status)
+               goto report_read_failure;
 
        if ((buf[0] & ~RTC_CMD_WRITE_DISABLE) != 0) {
                status = spi_write_then_read(spi, &addr, sizeof(addr), buf, 1);
-               if (status < 0) {
-                       dev_err(&spi->dev, "control register read error %d\n",
-                                       status);
-                       return status;
-               }
+               if (status)
+                       goto report_read_failure;
 
                if ((buf[0] & ~RTC_CMD_WRITE_DISABLE) != 0) {
                        dev_err(&spi->dev, "junk in control register\n");
@@ -189,6 +183,10 @@ static int ds1302_probe(struct spi_device *spi)
        }
 
        return 0;
+
+report_read_failure:
+       dev_err(&spi->dev, "control register read error %d\n", status);
+       return status;
 }
 
 static int ds1302_remove(struct spi_device *spi)
-- 
2.14.3

Reply via email to