Since usbatm doesn't set the usb_interface driver data until after calling bind
and heavy_init, it would be NULL when the sysfs attributes are read. Reading the
MAC address from atm_dev before atm_dev exists would have been be possible too.
Calling create_device_file in atm_start will avoid this problem, and the data
is useless until the first status poll runs. However, it must be ready before a
status poll does a printk on line status change otherwise userspace could react
before the files exist.
For completeness I've moved remove_device_file to atm_stop so it's not called in
unbind when it's not needed.
Signed-off-by: Simon Arlott <[EMAIL PROTECTED]>
Cc: Duncan Sands <[EMAIL PROTECTED]>
---
This is a resend of my email 28/04/07 with part of the description removed due
to patch 2/2.
#undef CXACRU_DEVICE_REVOVE_FILE
Oops.
drivers/usb/atm/cxacru.c | 45 +++++++++++++++++++++++++--------------------
1 files changed, 25 insertions(+), 20 deletions(-)
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 0b12ace..4ecb4c7 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -618,10 +618,22 @@ static int cxacru_card_status(struct cxacru_data
*instance)
return 0;
}
+static void cxacru_remove_device_files(struct usbatm_data *usbatm_instance,
+ struct atm_dev *atm_dev)
+{
+ struct usb_interface *intf = usbatm_instance->usb_intf;
+
+ #define CXACRU_DEVICE_REMOVE_FILE(_name) \
+ device_remove_file(&intf->dev, &dev_attr_##_name);
+ CXACRU_ALL_FILES(REMOVE);
+ #undef CXACRU_DEVICE_REMOVE_FILE
+}
+
static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
struct atm_dev *atm_dev)
{
struct cxacru_data *instance = usbatm_instance->driver_data;
+ struct usb_interface *intf = usbatm_instance->usb_intf;
/*
struct atm_dev *atm_dev = usbatm_instance->atm_dev;
*/
@@ -638,6 +650,13 @@ static int cxacru_atm_start(struct usbatm_data
*usbatm_instance,
return ret;
}
+ #define CXACRU_DEVICE_CREATE_FILE(_name) \
+ ret = device_create_file(&intf->dev, &dev_attr_##_name); \
+ if (unlikely(ret)) \
+ goto fail_sysfs;
+ CXACRU_ALL_FILES(CREATE);
+ #undef CXACRU_DEVICE_CREATE_FILE
+
/* start ADSL */
mutex_lock(&instance->adsl_state_serialize);
ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0,
NULL, 0);
@@ -669,6 +688,11 @@ static int cxacru_atm_start(struct usbatm_data
*usbatm_instance,
if (start_polling)
cxacru_poll_status(&instance->poll_work.work);
return 0;
+
+fail_sysfs:
+ usb_err(usbatm_instance, "cxacru_atm_start: device_create_file failed
(%d)\n", ret);
+ cxacru_remove_device_files(usbatm_instance, atm_dev);
+ return ret;
}
static void cxacru_poll_status(struct work_struct *work)
@@ -1054,13 +1078,6 @@ static int cxacru_bind(struct usbatm_data
*usbatm_instance,
goto fail;
}
- #define CXACRU_DEVICE_CREATE_FILE(_name) \
- ret = device_create_file(&intf->dev, &dev_attr_##_name); \
- if (unlikely(ret)) \
- goto fail_sysfs;
- CXACRU_ALL_FILES(CREATE);
- #undef CXACRU_DEVICE_CREATE_FILE
-
usb_fill_int_urb(instance->rcv_urb,
usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD),
instance->rcv_buf, PAGE_SIZE,
@@ -1081,14 +1098,6 @@ static int cxacru_bind(struct usbatm_data
*usbatm_instance,
return 0;
- fail_sysfs:
- dbg("cxacru_bind: device_create_file failed (%d)\n", ret);
-
- #define CXACRU_DEVICE_REMOVE_FILE(_name) \
- device_remove_file(&intf->dev, &dev_attr_##_name);
- CXACRU_ALL_FILES(REMOVE);
- #undef CXACRU_DEVICE_REVOVE_FILE
-
fail:
free_page((unsigned long) instance->snd_buf);
free_page((unsigned long) instance->rcv_buf);
@@ -1135,11 +1144,6 @@ static void cxacru_unbind(struct usbatm_data
*usbatm_instance,
free_page((unsigned long) instance->snd_buf);
free_page((unsigned long) instance->rcv_buf);
- #define CXACRU_DEVICE_REMOVE_FILE(_name) \
- device_remove_file(&intf->dev, &dev_attr_##_name);
- CXACRU_ALL_FILES(REMOVE);
- #undef CXACRU_DEVICE_REVOVE_FILE
-
kfree(instance);
usbatm_instance->driver_data = NULL;
@@ -1220,6 +1224,7 @@ static struct usbatm_driver cxacru_driver = {
.heavy_init = cxacru_heavy_init,
.unbind = cxacru_unbind,
.atm_start = cxacru_atm_start,
+ .atm_stop = cxacru_remove_device_files,
.bulk_in = CXACRU_EP_DATA,
.bulk_out = CXACRU_EP_DATA,
.rx_padding = 3,
--
1.5.0.1
--
Simon Arlott
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
