On Sun, Nov 5, 2017 at 6:49 AM, Wolfram Sang <w...@the-dreams.de> wrote: > On Wed, Nov 01, 2017 at 10:53:30AM +1030, Joel Stanley wrote: >> In order to use i2c from a cold boot, the i2c peripheral must be taken >> out of reset. We request a shared reset controller each time a bus >> driver is loaded, as the reset is shared between the 14 i2c buses. >> >> On remove the reset is asserted, which only touches the hardware once >> the last i2c bus is removed. >> >> The reset is required as the I2C buses will not work without releasing >> the reset. Previously the driver only worked with out of tree hacks >> that released this reset before the driver was loaded. Update the >> device tree bindings to reflect this. >> >> Signed-off-by: Joel Stanley <j...@jms.id.au> >> --- >> v4: >> - Make reset required and update device tree bindings > > For that change, I'd like to have an ack from Rob first. Won't that > cause problems when you update only the kernel and keep the "old" > devicetree?
Given it didn't really work as explained above, I'm okay with the change. Acked-by: Rob Herring <r...@kernel.org>
