In case of k2l there are 2 more banks with 16 pins each. Adding the node as the da-vinci driver now supports multiple banks.
Signed-off-by: Keerthy <[email protected]> --- This is based on linux-next branch. Boot tested on keystone-k2l-evm. arch/arm/boot/dts/keystone-k2l.dtsi | 44 +++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index 4370e65..cc77113 100644 --- a/arch/arm/boot/dts/keystone-k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -63,6 +63,50 @@ interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>; }; + gpio1: gpio@2348000 { + compatible = "ti,keystone-gpio"; + reg = <0x02348000 0x100>; + gpio-controller; + #gpio-cells = <2>; + /* HW Interrupts mapped to GPIO pins */ + interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 155 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 165 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 401 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 402 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 403 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 404 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 405 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkgpio>; + clock-names = "gpio"; + ti,ngpio = <32>; + ti,davinci-gpio-unbanked = <32>; + }; + k2l_pmx: pinmux@2620690 { compatible = "pinctrl-single"; reg = <0x02620690 0xc>; -- 1.9.1
