Before this patch, driver generated random MAC address every time it was
initialized. After that random MAC address could be overwritten with fixed
one, if provided.

This patch changes order. First it tries to read fixed MAC address and if
it fails then driver generates random MAC address.

Signed-off-by: Pali Rohár <pali.ro...@gmail.com>
Acked-by: Pavel Machek <pa...@ucw.cz>
---
 drivers/net/wireless/ti/wl1251/main.c |   27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ti/wl1251/main.c 
b/drivers/net/wireless/ti/wl1251/main.c
index 8929bb3..9106c20 100644
--- a/drivers/net/wireless/ti/wl1251/main.c
+++ b/drivers/net/wireless/ti/wl1251/main.c
@@ -1492,7 +1492,24 @@ int wl1251_init_ieee80211(struct wl1251 *wl)
        wl->hw->queues = 4;
 
        if (wl->use_eeprom)
-               wl1251_read_eeprom_mac(wl);
+               ret = wl1251_read_eeprom_mac(wl);
+       else
+               ret = -EINVAL;
+
+       if (ret == 0 && !is_valid_ether_addr(wl->mac_addr))
+               ret = -EINVAL;
+
+       if (ret < 0) {
+               /*
+                * In case our MAC address is not correctly set,
+                * we use a random but Nokia MAC.
+                */
+               static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
+               memcpy(wl->mac_addr, nokia_oui, 3);
+               get_random_bytes(wl->mac_addr + 3, 3);
+               wl1251_warning("MAC address in eeprom or nvs data is not 
valid");
+               wl1251_warning("Setting random MAC address: %pM", wl->mac_addr);
+       }
 
        ret = wl1251_register_hw(wl);
        if (ret)
@@ -1513,7 +1530,6 @@ struct ieee80211_hw *wl1251_alloc_hw(void)
        struct ieee80211_hw *hw;
        struct wl1251 *wl;
        int i;
-       static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
 
        hw = ieee80211_alloc_hw(sizeof(*wl), &wl1251_ops);
        if (!hw) {
@@ -1563,13 +1579,6 @@ struct ieee80211_hw *wl1251_alloc_hw(void)
        INIT_WORK(&wl->irq_work, wl1251_irq_work);
        INIT_WORK(&wl->tx_work, wl1251_tx_work);
 
-       /*
-        * In case our MAC address is not correctly set,
-        * we use a random but Nokia MAC.
-        */
-       memcpy(wl->mac_addr, nokia_oui, 3);
-       get_random_bytes(wl->mac_addr + 3, 3);
-
        wl->state = WL1251_STATE_OFF;
        mutex_init(&wl->mutex);
        spin_lock_init(&wl->wl_lock);
-- 
1.7.9.5

Reply via email to