Hi! > Introducing the LM3692x Dual-String white LED driver. > > Data sheet is located
"located at"? (Twice.) > http://www.ti.com/lit/ds/snvsa29/snvsa29.pdf > > Signed-off-by: Dan Murphy <[email protected]> > +config LEDS_LM3692X > + tristate "LED support for LM3692x Chips" > + depends on LEDS_CLASS && I2C > + select REGMAP_I2C > + help > + This option enables support for the TI LM3692x family > + of LED drivers. "If unsure ..., module will be named..." Might want to say this is for backlight LEDs here. > +static int lm3692x_fault_check(struct lm3692x_led *led) > +{ > + int ret, fault; > + unsigned int read_buf; > + > + ret = regmap_read(led->regmap, LM3692X_FAULT_FLAGS, &read_buf); > + if (ret) > + return ret; > + > + fault = read_buf; > + > + if (fault) > + dev_err(&led->client->dev, "Detected a fault 0x%X\n", > + fault); > + > + return ret; > +} Get rid of "fault" variable? Does fault need to be propagated to the caller? > +static int lm3692x_init(struct lm3692x_led *led) > +{ > + int ret; > + > + if (led->regulator) { > + ret = regulator_enable(led->regulator); > + if (ret) > + dev_err(&led->client->dev, > + "Failed to enable regulator\n"); > + goto out; > + } > + > + if (led->enable_gpio) > + gpiod_direction_output(led->enable_gpio, 1); > + > + ret = lm3692x_fault_check(led); > + if (ret) { > + dev_err(&led->client->dev, "Cannot read/clear faults\n"); > + goto out; > + } > + > + ret = regmap_write(led->regmap, LM3692X_BRT_CTRL, 0x00); > + if (ret) { > + dev_err(&led->client->dev, "Fail writing BRT CTRL\n"); > + goto out; > + } How often are those fails reached? Maybe regmap wrapper that would print "reading/writing register XY failed" would be enough? Otherwise looks good, Acked-by: Pavel Machek <[email protected]> Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
signature.asc
Description: Digital signature
