From: Jan Engelhardt <[EMAIL PROTECTED]>
Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.
Signed-off-by: Jan Engelhardt <[EMAIL PROTECTED]>
Signed-off-by: Krzysztof Halasa <[EMAIL PROTECTED]>
---
drivers/net/wan/Kconfig | 34 +++++++++++++++-------------------
1 file changed, 15 insertions(+), 19 deletions(-)
--- linux-2.6.21-mm_20070428.orig/drivers/net/wan/Kconfig
+++ linux-2.6.21-mm_20070428/drivers/net/wan/Kconfig
@@ -2,10 +2,7 @@
# wan devices configuration
#
-menu "Wan interfaces"
- depends on NETDEVICES
-
-config WAN
+menuconfig WAN
bool "Wan interfaces support"
---help---
Wide Area Networks (WANs), such as X.25, Frame Relay and leased
@@ -23,10 +20,12 @@ config WAN
If unsure, say N.
+if WAN
+
# There is no way to detect a comtrol sv11 - force it modular for now.
config HOSTESS_SV11
tristate "Comtrol Hostess SV-11 support"
- depends on WAN && ISA && m && ISA_DMA_API && INET
+ depends on ISA && m && ISA_DMA_API && INET
help
Driver for Comtrol Hostess SV-11 network card which
operates on low speed synchronous serial links at up to
@@ -38,7 +37,7 @@ config HOSTESS_SV11
# The COSA/SRP driver has not been tested as non-modular yet.
config COSA
tristate "COSA/SRP sync serial boards support"
- depends on WAN && ISA && m && ISA_DMA_API
+ depends on ISA && m && ISA_DMA_API
---help---
Driver for COSA and SRP synchronous serial boards.
@@ -62,7 +61,7 @@ config COSA
#
config LANMEDIA
tristate "LanMedia Corp. SSI/V.35, T1/E1, HSSI, T3 boards"
- depends on WAN && PCI
+ depends on PCI
---help---
Driver for the following Lan Media family of serial boards:
@@ -89,7 +88,7 @@ config LANMEDIA
# There is no way to detect a Sealevel board. Force it modular
config SEALEVEL_4021
tristate "Sealevel Systems 4021 support"
- depends on WAN && ISA && m && ISA_DMA_API && INET
+ depends on ISA && m && ISA_DMA_API && INET
help
This is a driver for the Sealevel Systems ACB 56 serial I/O adapter.
@@ -99,7 +98,6 @@ config SEALEVEL_4021
# Generic HDLC
config HDLC
tristate "Generic HDLC layer"
- depends on WAN
help
Say Y to this option if your Linux box contains a WAN (Wide Area
Network) card supported by this driver and you are planning to
@@ -167,7 +165,7 @@ config HDLC_X25
If unsure, say N.
comment "X.25/LAPB support is disabled"
- depends on WAN && HDLC && (LAPB!=m || HDLC!=m) && LAPB!=y
+ depends on HDLC && (LAPB!=m || HDLC!=m) && LAPB!=y
config PCI200SYN
tristate "Goramo PCI200SYN support"
@@ -230,10 +228,10 @@ config PC300_MLPPP
Multilink PPP over the PC300 synchronous communication boards.
comment "Cyclades-PC300 MLPPP support is disabled."
- depends on WAN && HDLC && PC300 && (PPP=n || !PPP_MULTILINK ||
PPP_SYNC_TTY=n || !HDLC_PPP)
+ depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n
|| !HDLC_PPP)
comment "Refer to the file README.mlppp, provided by PC300 package."
- depends on WAN && HDLC && PC300 && (PPP=n || !PPP_MULTILINK ||
PPP_SYNC_TTY=n || !HDLC_PPP)
+ depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n
|| !HDLC_PPP)
config PC300TOO
tristate "Cyclades PC300 RSV/X21 alternative support"
@@ -338,7 +336,6 @@ config DSCC4_PCI_RST
config DLCI
tristate "Frame Relay DLCI support"
- depends on WAN
---help---
Support for the Frame Relay protocol.
@@ -385,7 +382,7 @@ config SDLA
# Wan router core.
config WAN_ROUTER_DRIVERS
tristate "WAN router drivers"
- depends on WAN && WAN_ROUTER
+ depends on WAN_ROUTER
---help---
Connect LAN to WAN via Linux box.
@@ -440,7 +437,7 @@ config CYCLOMX_X25
# X.25 network drivers
config LAPBETHER
tristate "LAPB over Ethernet driver (EXPERIMENTAL)"
- depends on WAN && LAPB && X25
+ depends on LAPB && X25
---help---
Driver for a pseudo device (typically called /dev/lapb0) which allows
you to open an LAPB point-to-point connection to some other computer
@@ -456,7 +453,7 @@ config LAPBETHER
config X25_ASY
tristate "X.25 async driver (EXPERIMENTAL)"
- depends on WAN && LAPB && X25
+ depends on LAPB && X25
---help---
Send and receive X.25 frames over regular asynchronous serial
lines such as telephone lines equipped with ordinary modems.
@@ -471,7 +468,7 @@ config X25_ASY
config SBNI
tristate "Granch SBNI12 Leased Line adapter support"
- depends on WAN && X86
+ depends on X86
---help---
Driver for ISA SBNI12-xx cards which are low cost alternatives to
leased line modems.
@@ -497,5 +494,4 @@ config SBNI_MULTILINE
If unsure, say N.
-endmenu
-
+endif # WAN
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
