On 8 May 2007, at 01:36, Krzysztof Halasa wrote:
Adds a driver for built-in IXP4xx Network Processor Engines.
This patch requires IXP4xx Queue Manager driver and the "fuses" patch.
Signed-off-by: Krzysztof Halasa <[EMAIL PROTECTED]>
[snip]
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-
ixp4xx/ixp4xx_npe.c
new file mode 100644
index 0000000..4c77d8a
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
Already in mach-ixp4xx, so can just be called npe.c
@@ -0,0 +1,737 @@
+/*
+ * Intel IXP4xx Network Processor Engine driver for Linux
+ *
+ * Copyright (C) 2007 Krzysztof Halasa <[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or
modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * The code is based on publicly available information:
+ * - Intel IXP4xx Developer's Manual and other e-papers
+ * - Intel IXP400 Access Library Software (BSD license)
+ * - previous works by Christian Hohnstaedt
<[EMAIL PROTECTED]>
+ * Thanks, Christian.
+ */
[snip]
+int npe_load_firmware(struct npe *npe, const char *name, struct
device *dev)
+{
+ const struct firmware *fw_entry;
+
+ struct dl_block {
+ u32 type;
+ u32 offset;
+ } *blk;
+
+ struct dl_image {
+ u32 magic;
+ u32 id;
+ u32 size;
+ union {
+ u32 data[0];
+ struct dl_block blocks[0];
+ };
+ } *image;
+
+ struct dl_codeblock {
+ u32 npe_addr;
+ u32 size;
+ u32 data[0];
+ } *cb;
+
+ int i, j, err, data_size, instr_size, blocks, table_end;
+ u32 cmd;
+
+ if ((err = request_firmware(&fw_entry, name, dev)) != 0)
+ return err;
+
+ err = -EINVAL;
+ if (fw_entry->size < sizeof(struct dl_image)) {
+ print_npe(KERN_ERR, npe, "incomplete firmware file\n");
+ goto err;
+ }
+ image = (struct dl_image*)fw_entry->data;
+
+#if DEBUG_FW
+ print_npe(KERN_DEBUG, npe, "firmware: %08X %08X %08X (0x%X bytes)
\n",
+ image->magic, image->id, image->size, image->size * 4);
+#endif
+
+ if (image->magic == swab32(FW_MAGIC)) { /* swapped file */
+ image->id = swab32(image->id);
+ image->size = swab32(image->size);
+ } else if (image->magic != FW_MAGIC) {
+ print_npe(KERN_ERR, npe, "bad firmware file magic: 0x%X\n",
+ image->magic);
+ goto err;
+ }
+ if ((image->size * 4 + sizeof(struct dl_image)) != fw_entry->size) {
+ print_npe(KERN_ERR, npe,
+ "inconsistent size of firmware file\n");
+ goto err;
+ }
+ if (((image->id >> 24) & 0xF /* NPE ID */) != npe->id) {
+ print_npe(KERN_ERR, npe, "firmware file NPE ID mismatch\n");
+ goto err;
+ }
+ if (image->magic == swab32(FW_MAGIC))
+ for (i = 0; i < image->size; i++)
+ image->data[i] = swab32(image->data[i]);
+
+ if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) {
+ print_npe(KERN_INFO, npe, "IXP46x firmware ignored on "
+ "IXP42x\n");
+ goto err;
+ }
+
+ if (npe_running(npe)) {
+ print_npe(KERN_INFO, npe, "unable to load firmware, NPE is "
+ "already running\n");
+ err = -EBUSY;
+ goto err;
+ }
+#if 0
+ npe_stop(npe);
+ npe_reset(npe);
+#endif
Debugging code? Can this go?
+ print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
+ "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
+ (image->id >> 8) & 0xFF, image->id & 0xFF);
+
+ if (!cpu_is_ixp46x()) {
+ if (!npe->id)
+ instr_size = NPE_A_42X_INSTR_SIZE;
+ else
+ instr_size = NPE_B_AND_C_42X_INSTR_SIZE;
+ data_size = NPE_42X_DATA_SIZE;
+ } else {
+ instr_size = NPE_46X_INSTR_SIZE;
+ data_size = NPE_46X_DATA_SIZE;
+ }
+
+ for (blocks = 0; blocks * sizeof(struct dl_block) / 4 < image->size;
+ blocks++)
+ if (image->blocks[blocks].type == FW_BLOCK_TYPE_EOF)
+ break;
+ if (blocks * sizeof(struct dl_block) / 4 >= image->size) {
+ print_npe(KERN_INFO, npe, "firmware EOF block marker not "
+ "found\n");
+ goto err;
+ }
+
+#if DEBUG_FW
+ print_npe(KERN_DEBUG, npe, "%i firmware blocks found\n", blocks);
+#endif
+
+ table_end = blocks * sizeof(struct dl_block) / 4 + 1 /* EOF
marker */;
+ for (i = 0, blk = image->blocks; i < blocks; i++, blk++) {
+ if (blk->offset > image->size - sizeof(struct dl_codeblock) / 4
+ || blk->offset < table_end) {
+ print_npe(KERN_INFO, npe, "invalid offset 0x%X of "
+ "firmware block #%i\n", blk->offset, i);
+ goto err;
+ }
+
+ cb = (struct dl_codeblock*)&image->data[blk->offset];
+ if (blk->type == FW_BLOCK_TYPE_INSTR) {
+ if (cb->npe_addr + cb->size > instr_size)
+ goto too_big;
+ cmd = CMD_WR_INS_MEM;
+ } else if (blk->type == FW_BLOCK_TYPE_DATA) {
+ if (cb->npe_addr + cb->size > data_size)
+ goto too_big;
+ cmd = CMD_WR_DATA_MEM;
+ } else {
+ print_npe(KERN_INFO, npe, "invalid firmware block #%i "
+ "type 0x%X\n", i, blk->type);
+ goto err;
+ }
+ if (blk->offset + sizeof(*cb) / 4 + cb->size > image->size) {
+ print_npe(KERN_INFO, npe, "firmware block #%i doesn't "
+ "fit in firmware image: type %c, start 0x%X,"
+ " length 0x%X\n", i,
+ blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
+ cb->npe_addr, cb->size);
+ goto err;
+ }
+
+ for (j = 0; j < cb->size; j++)
+ npe_cmd_write(npe, cb->npe_addr + j, cmd, cb->data[j]);
+ }
+
+ npe_start(npe);
+ if (!npe_running(npe))
+ print_npe(KERN_ERR, npe, "unable to start\n");
+ release_firmware(fw_entry);
+ return 0;
+
+too_big:
+ print_npe(KERN_INFO, npe, "firmware block #%i doesn't fit in NPE "
+ "memory: type %c, start 0x%X, length 0x%X\n", i,
+ blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
+ cb->npe_addr, cb->size);
+err:
+ release_firmware(fw_entry);
+ return err;
+}
[snip]
+module_init(npe_init_module);
+module_exit(npe_cleanup_module);
+
+MODULE_AUTHOR("Krzysztof Halasa");
+MODULE_LICENSE("GPL v2");
+
+EXPORT_SYMBOL(npe_names);
+EXPORT_SYMBOL(npe_running);
+EXPORT_SYMBOL(npe_request);
+EXPORT_SYMBOL(npe_release);
+EXPORT_SYMBOL(npe_load_firmware);
+EXPORT_SYMBOL(npe_send_message);
+EXPORT_SYMBOL(npe_recv_message);
+EXPORT_SYMBOL(npe_send_recv_message);
diff --git a/include/asm-arm/arch-ixp4xx/npe.h b/include/asm-arm/
arch-ixp4xx/npe.h
new file mode 100644
index 0000000..fd20bf5
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/npe.h
@@ -0,0 +1,41 @@
+#ifndef __IXP4XX_NPE_H
+#define __IXP4XX_NPE_H
+
+#include <linux/etherdevice.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+
+extern const char *npe_names[];
+
+struct npe_regs {
+ u32 exec_addr, exec_data, exec_status_cmd, exec_count;
+ u32 action_points[4];
+ u32 watchpoint_fifo, watch_count;
+ u32 profile_count;
+ u32 messaging_status, messaging_control;
+ u32 mailbox_status, /*messaging_*/ in_out_fifo;
+};
+
+struct npe {
+ struct resource *mem_res;
+ struct npe_regs __iomem *regs;
+ u32 regs_phys;
+ int id;
+ int valid;
+};
+
+
+static inline const char *npe_name(struct npe *npe)
+{
+ return npe_names[npe->id];
+}
+
+int npe_running(struct npe *npe);
+int npe_send_message(struct npe *npe, const void *msg, const char
*what);
+int npe_recv_message(struct npe *npe, void *msg, const char *what);
+int npe_send_recv_message(struct npe *npe, void *msg, const char
*what);
+int npe_load_firmware(struct npe *npe, const char *name, struct
device *dev);
+struct npe *npe_request(int id);
+void npe_release(struct npe *npe);
+
+#endif /* __IXP4XX_NPE_H */
It may be a matter of taste, but could some of the many definitions
at the top of ixp4xx_npe.c go in the header file here?
Michael-Luke
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
