This patch is to add the machine descriptions for ODROID-XU3/4 boards
in order to present the hardware name at /proc/cputinfo rather than
"SAMSUNG EXYNOS (Flattened Device Tree)". An embedded open source project,
such as DietPi, reads the hardware name to run different features.
$ cat /proc/cpuinfo | grep Hardware
Hardware : ODROID-XU4
Signed-off-by: Dongjin Kim <tobet...@gmail.com>
---
arch/arm/mach-exynos/exynos.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index c404c15ad07f..6197dbf9f48b 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -241,3 +241,31 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened
Device Tree)")
.dt_compat = exynos_dt_compat,
.dt_fixup = exynos_dt_fixup,
MACHINE_END
+
+#define ODROID_MACHINE_START(name, compat) \
+ DT_MACHINE_START(EXYNOS5422_ODROID_##name, "ODROID-"#name) \
+ .l2c_aux_val = 0x3c400001, \
+ .l2c_aux_mask = 0xc20fffff, \
+ .smp = smp_ops(exynos_smp_ops), \
+ .map_io = exynos_init_io, \
+ .init_early = exynos_firmware_init, \
+ .init_irq = exynos_init_irq, \
+ .init_machine = exynos_dt_machine_init, \
+ .init_late = exynos_init_late, \
+ .dt_compat = compat, \
+ .dt_fixup = exynos_dt_fixup, \
+ MACHINE_END
+
+static char const *const exynos5422_odroidxu3_dt_compat[] __initconst = {
+ "hardkernel,odroid-xu3",
+ "hardkernel,odroid-xu3-lite",
+ NULL,
+};
+
+static char const *const exynos5422_odroidxu4_dt_compat[] __initconst = {
+ "hardkernel,odroid-xu4",
+ NULL,
+};
+
+ODROID_MACHINE_START(XU3, exynos5422_odroidxu3_dt_compat)
+ODROID_MACHINE_START(XU4, exynos5422_odroidxu4_dt_compat)
--
2.11.0
