The correct DT property for specifying a GPIO used for reset
is "reset-gpios", fix this here.
Fixes: 4341881d0562 ("ARM: dts: Add devicetree for Gumstix Pepper board")
Signed-off-by: Andrew F. Davis <a...@ti.com>
---
arch/arm/boot/dts/am335x-pepper.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/am335x-pepper.dts
b/arch/arm/boot/dts/am335x-pepper.dts
index 03c7d77023c6..9fb7426070ce 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -139,7 +139,7 @@
&audio_codec {
status = "okay";
- gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
AVDD-supply = <&ldo3_reg>;
IOVDD-supply = <&ldo3_reg>;
DRVDD-supply = <&ldo3_reg>;
--
2.15.0
