Le 30/11/2017 à 19:45, Cyrille Pitchen a écrit :
> Hi all,
>
> Le 30/11/2017 à 19:18, Lorenzo Pieralisi a écrit :
>> On Thu, Nov 30, 2017 at 12:43:20PM +0530, Kishon Vijay Abraham I wrote:
>>
>> [...]
>>
>>>>> For linux-next, I applied this series on top of Kishon's patch
>>>>> ("PCI: endpoint: Use EPC's device in
>>>>> dma_alloc_coherent/dma_free_coherent")
>>>>> otherwise dma_alloc_coherent() fails when called by pci_epf_alloc_space().
>>>>>
>>>>> Also, I patched drivers/Makefile rather than drivers/pci/Makefile to make
>>>>> the drivers/pci/cadence/pcie-cadence-ep.o linked after
>>>
>>> The reason to patch drivers/Makefile should be because pcie-cadence-ep has
>>> to
>>> be compiled even when CONFIG_PCI is not enabled. CONFIG_PCI enables host
>>> specific features and ENDPOINT shouldn't depend on CONFIG_PCI.
>>>>> drivers/pci/endpoint/*.o objects, otherwise the built-in pci-cadence-ep
>>>>> driver would be probed before the PCI endpoint framework would have been
>>>>> initialized, which results in a kernel crash.
>>>>
>>>> Nice :( - isn't there a way to improve this (ie probe deferral or
>>>> registering the EPF bus earlier) ?
>>>>
>>>>> I guess this is the reason why the "pci/dwc" line was also put in
>>>>> drivers/Makefile, right after the "pci/endpoint" line.
>>>>
>>>> Or probably the other way around - see commit 5e8cb4033807
>>>>
>>>> @Kishon, thoughts ?
>>>
>>> Lorenzo, ordering Makefile is one way to initialize EP core before
>>
>> Makefile ordering is fragile, I do not like relying on it.
>>
>>> other drivers. the other way is to have PCI EP core have a different
>>> initcall level.. subsys_initcall??
>>
>> Yes, registering the bus at eg postcore_initcall() as PCI does should do
>> (if that's the problem this is solving) but still, the code must not
>> crash if the ordering is not correct, we have to fix this regardless.
>>
>> I would appreciate if Cyrille can debug the cause of the kernel crash
>> so that we can fix it in the longer term.
>>
>
> I had the crash kernel few weeks ago hence I have to test again to confirm
> but if I remember correctly it was a NULL pointer dereferencing crash:
>
> cdns_pcie_ep_probe()
> |
> +--> devm_pci_epc_create()
> |
> +--> __devm_pci_ep_create()
> |
> +--> __pci_epc_create()
> |
> +--> pci_ep_cfs_add_epc_group()
> |
> | /*
> | * Here controllers_group is still NULL because
> | * pci_ep_cfs_init() has not been called yet.
> | */
> +--> configfs_register_group(controllers_group, ...)
> |
> +--> link_group()
> /* Dereferencing NULL pointer */
>
> Best regards,
>
> Cyrille
>
I know it's far from perfect but what do you think or something like that:
---8<---------------------------------------------------------------------------
diff --git a/drivers/Makefile b/drivers/Makefile
index 27bdd98784d9..9757199b9a65 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -16,11 +16,7 @@ obj-$(CONFIG_PINCTRL) += pinctrl/
obj-$(CONFIG_GPIOLIB) += gpio/
obj-y += pwm/
-obj-$(CONFIG_PCI) += pci/
-obj-$(CONFIG_PCI_ENDPOINT) += pci/endpoint/
-obj-$(CONFIG_PCI_CADENCE) += pci/cadence/
-# PCI dwc controller drivers
-obj-y += pci/dwc/
+obj-y += pci/
obj-$(CONFIG_PARISC) += parisc/
obj-$(CONFIG_RAPIDIO) += rapidio/
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 3d5e047f0a32..4e57fe4499ce 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -3,6 +3,7 @@
# Makefile for the PCI bus specific drivers.
#
+ifdef CONFIG_PCI
obj-y += access.o bus.o probe.o host-bridge.o remove.o pci.o \
pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
irq.o vpd.o setup-bus.o vc.o mmap.o setup-irq.o
@@ -54,3 +55,9 @@ ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
# PCI host controller drivers
obj-y += host/
obj-y += switch/
+endif
+
+obj-$(CONFIG_PCI_ENDPOINT) += endpoint/
+obj-$(CONFIG_PCI_CADENCE) += cadence/
+# PCI dwc controller drivers
+obj-y += dwc/
---8<---------------------------------------------------------------------------
I admit it doesn't solve the ordering issue but at least it cleans some mess
in drivers/Makefile.
I agree with Lorenzo, we should avoid as much as we could to rely on the
link order.
However I faced another issue: code from pcie-cadence.c is used by both
pcie-cadence-host.c and pcie-cadence-ep.c so I had to find a way to compile
this shared file if at least one of the host and EPC driver was selected.
That's why I put source files in the cadence sub-directory and used the
single cadence/Makefile to regroup all the compilation rules, instead of
splitting them between pci/Makefile and pci/endpoint/Makefile and having to
add pcie-cadence.o in both Makefiles.
>> Thanks,
>> Lorenzo
>>
>
>
--
Cyrille Pitchen, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
