On 11/29/2017 03:32 PM, Andrew F. Davis wrote:
> Move to using newer gpiod_* GPIO handling functions. This simplifies
> the code and eases dropping platform data in the next patch. Also
> remember GPIO are active low, so set "1" to reset.
>
> Signed-off-by: Andrew F. Davis <a...@ti.com>
> ---
Kbuild bot seems mad a this one, looks like I need to include
linux/gpio/consumer.h, will fix for v3.
> sound/soc/codecs/tlv320aic31xx.c | 23 ++++++++++-------------
> 1 file changed, 10 insertions(+), 13 deletions(-)
>
> diff --git a/sound/soc/codecs/tlv320aic31xx.c
> b/sound/soc/codecs/tlv320aic31xx.c
> index c84febd991a0..ab03a19f6aaa 100644
> --- a/sound/soc/codecs/tlv320aic31xx.c
> +++ b/sound/soc/codecs/tlv320aic31xx.c
> @@ -157,6 +157,7 @@ struct aic31xx_priv {
> u8 i2c_regs_status;
> struct device *dev;
> struct regmap *regmap;
> + struct gpio_desc *gpio_reset;
> struct aic31xx_pdata pdata;
> struct regulator_bulk_data supplies[AIC31XX_NUM_SUPPLIES];
> struct aic31xx_disable_nb disable_nb[AIC31XX_NUM_SUPPLIES];
> @@ -1020,8 +1021,8 @@ static int aic31xx_regulator_event(struct
> notifier_block *nb,
> * Put codec to reset and as at least one of the
> * supplies was disabled.
> */
> - if (gpio_is_valid(aic31xx->pdata.gpio_reset))
> - gpio_set_value(aic31xx->pdata.gpio_reset, 0);
> + if (aic31xx->gpio_reset)
> + gpiod_set_value(aic31xx->gpio_reset, 1);
>
> regcache_mark_dirty(aic31xx->regmap);
> dev_dbg(aic31xx->dev, "## %s: DISABLE received\n", __func__);
> @@ -1073,8 +1074,8 @@ static int aic31xx_power_on(struct snd_soc_codec *codec)
> if (ret)
> return ret;
>
> - if (gpio_is_valid(aic31xx->pdata.gpio_reset)) {
> - gpio_set_value(aic31xx->pdata.gpio_reset, 1);
> + if (aic31xx->gpio_reset) {
> + gpiod_set_value(aic31xx->gpio_reset, 0);
> udelay(100);
> }
> regcache_cache_only(aic31xx->regmap, false);
> @@ -1334,15 +1335,11 @@ static int aic31xx_i2c_probe(struct i2c_client *i2c,
> else if (aic31xx->dev->of_node)
> aic31xx_pdata_from_of(aic31xx);
>
> - if (aic31xx->pdata.gpio_reset) {
> - ret = devm_gpio_request_one(aic31xx->dev,
> - aic31xx->pdata.gpio_reset,
> - GPIOF_OUT_INIT_HIGH,
> - "aic31xx-reset-pin");
> - if (ret < 0) {
> - dev_err(aic31xx->dev, "not able to acquire gpio\n");
> - return ret;
> - }
> + aic31xx->gpio_reset = devm_gpiod_get_optional(aic31xx->dev, "reset",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(aic31xx->gpio_reset)) {
> + dev_err(aic31xx->dev, "not able to acquire gpio\n");
> + return PTR_ERR(aic31xx->gpio_reset);
> }
>
> for (i = 0; i < ARRAY_SIZE(aic31xx->supplies); i++)
>
