Updating 'power_mode' in sdhci_omap_init_74_clocks results in
'power_mode' never updated to MMC_POWER_OFF during card
removal. This results in initialization sequence not sent to the
card during re-insertion.
Fix it here by adding sdhci_omap_set_power_mode to update power_mode.
This function can also be used later to perform operations that
are specific to a power mode (e.g, disable tuning during power off).
Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
---
drivers/mmc/host/sdhci-omap.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 628bfe9a3d17..96985786cadf 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -244,6 +244,12 @@ static int sdhci_omap_start_signal_voltage_switch(struct
mmc_host *mmc,
return 0;
}
+static void sdhci_omap_set_power_mode(struct sdhci_omap_host *omap_host,
+ u8 power_mode)
+{
+ omap_host->power_mode = power_mode;
+}
+
static void sdhci_omap_set_bus_mode(struct sdhci_omap_host *omap_host,
unsigned int mode)
{
@@ -273,6 +279,7 @@ static void sdhci_omap_set_ios(struct mmc_host *mmc, struct
mmc_ios *ios)
sdhci_omap_set_bus_mode(omap_host, ios->bus_mode);
sdhci_set_ios(mmc, ios);
+ sdhci_omap_set_power_mode(omap_host, ios->power_mode);
}
static u16 sdhci_omap_calc_divisor(struct sdhci_pltfm_host *host,
@@ -401,8 +408,6 @@ static void sdhci_omap_init_74_clocks(struct sdhci_host
*host, u8 power_mode)
sdhci_omap_writel(omap_host, SDHCI_OMAP_STAT, INT_CC_EN);
enable_irq(host->irq);
-
- omap_host->power_mode = power_mode;
}
static struct sdhci_ops sdhci_omap_ops = {
@@ -504,6 +509,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
omap_host->host = host;
omap_host->base = host->ioaddr;
omap_host->dev = dev;
+ omap_host->power_mode = MMC_POWER_UNDEFINED;
host->ioaddr += offset;
mmc = host->mmc;
--
2.11.0
