Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e
"s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1
\{/g" {} +
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x
from bindings notation")
Reported-by: David Daney <[email protected]>
Suggested-by: Rob Herring <[email protected]>
Signed-off-by: Mathieu Malaterre <[email protected]>
---
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 2 +-
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 2 +-
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 6 +++---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 6 +++---
4 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 3aee6123d161..3f5ff76109be 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -51,7 +51,7 @@
#size-cells = <2>;
ranges;
- ramoops@0x21f00000 {
+ ramoops@21f00000 {
compatible = "ramoops";
reg = <0x0 0x21f00000 0x0 0x00100000>;
record-size = <0x00020000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 26396ef53bde..0446b122a6e2 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -249,7 +249,7 @@
reg = <0 0x10005000 0 0x1000>;
};
- pio: pinctrl@0x10005000 {
+ pio: pinctrl@10005000 {
compatible = "mediatek,mt8173-pinctrl";
reg = <0 0x1000b000 0 0x1000>;
mediatek,pctl-regmap = <&syscfg_pctl_a>;
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 492a011f14f6..1c8f1b86472d 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -140,16 +140,16 @@
};
agnoc@0 {
- qcom,pcie@00600000 {
+ qcom,pcie@600000 {
perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
};
- qcom,pcie@00608000 {
+ qcom,pcie@608000 {
status = "okay";
perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
};
- qcom,pcie@00610000 {
+ qcom,pcie@610000 {
status = "okay";
perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi
b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 4b2afcc4fdf4..0a6f7952bbb1 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -840,7 +840,7 @@
#size-cells = <1>;
ranges;
- pcie0: qcom,pcie@00600000 {
+ pcie0: qcom,pcie@600000 {
compatible = "qcom,pcie-msm8996",
"snps,dw-pcie";
status = "disabled";
power-domains = <&gcc PCIE0_GDSC>;
@@ -893,7 +893,7 @@
};
- pcie1: qcom,pcie@00608000 {
+ pcie1: qcom,pcie@608000 {
compatible = "qcom,pcie-msm8996",
"snps,dw-pcie";
power-domains = <&gcc PCIE1_GDSC>;
bus-range = <0x00 0xff>;
@@ -946,7 +946,7 @@
"bus_slave";
};
- pcie2: qcom,pcie@00610000 {
+ pcie2: qcom,pcie@610000 {
compatible = "qcom,pcie-msm8996",
"snps,dw-pcie";
power-domains = <&gcc PCIE2_GDSC>;
bus-range = <0x00 0xff>;
--
2.11.0
