On Tue, Dec 12, 2017 at 04:01:39PM -0600, Dan Murphy wrote:
> Update the lp8860 label binding to the LED
> standard as documented in
>
> Documentation/devicetree/bindings/leds/common.txt
>
> Signed-off-by: Dan Murphy <[email protected]>
> ---
>
> v4 - No changes
>
> v3 - Added address and size cells, updated label with color and inserted
> spaces
> around the reg node - https://patchwork.kernel.org/patch/10093749/
> v2 - Added reg to child node and made it required
>
> Documentation/devicetree/bindings/leds/leds-lp8860.txt | 17 +++++++++++++++--
> 1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt
> b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
> index b9d09acbaa73..c3d64ade1e26 100644
> --- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt
> +++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
> @@ -9,20 +9,33 @@ Required properties:
> - compatible :
> "ti,lp8860"
> - reg : I2C slave address
> - - label : Used for naming LEDs
> + - #address-cells : 1
> + - #size-cells : 0
>
> Optional properties:
> - enable-gpios : gpio pin to enable (active high)/disable the device.
> - vled-supply : LED supply
>
> +Required child properties:
> + - reg : 0
> +
This should be in previous patch?
> +Optional child properties:
> + - label : see Documentation/devicetree/bindings/leds/common.txt
> +
> Example:
>
> led-controller@2d {
> compatible = "ti,lp8860";
> + #address-cells = <1>;
> + #size-cells = <0>;
> reg = <0x2d>;
> - label = "display_cluster";
> enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> vled-supply = <&vbatt>;
> +
> + led@0 {
> + reg = <0>;
> + label = "white:display_cluster";
> + };
> }
>
> For more product information please see the link below:
> --
> 2.15.0.124.g7668cbc60
>
