On 04/12/17 12:10, LinuxPatchCommit wrote:
> Dear all,
>
> Don't clear transfer mode register in sdhci_set_transfer_mode().
>
> In sdhci_set_transfer_mode(), clear transfer mode quirk2 will clear SD host
> transfer mode register for non-data commands. This quirk is used for the bug
> of O2micro/Bayhubtech devices. In eMMC HS200 tuning case, the tuning process
> uses hardware tuning and it needs to set transfer mode register for tuning
> command.
>
> Signed-off-by: ernest.zhang <[email protected]>
> ---
> drivers/mmc/host/sdhci.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index
> 0d5fcca18c9e..d5b19fc9ea56 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -918,7 +918,9 @@ static void sdhci_set_transfer_mode(struct sdhci_host
> *host,
> if (data == NULL) {
> if (host->quirks2 &
> SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) {
> - sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
> + /* cannot clear transfer mode register when tuning */
> + if (cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200)
> + sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
In the HS200 case you are sending the tuning command with data, so I do not
understand why you need this i.e. you will never get here
> } else {
> /* clear Auto CMD settings for no data CMDs */
> mode = sdhci_readw(host, SDHCI_TRANSFER_MODE);
> --
> 2.14.1
>
