All Colibri iMX7 SKUs use either single-die NAND or eMMC, hence
NAND_CE1 is not used on the module and can be used as a GPIO by
carrier boards.
Signed-off-by: Stefan Agner <ste...@agner.ch>
Reviewed-by: Fabio Estevam <fabio.este...@nxp.com>
---
arch/arm/boot/dts/imx7-colibri.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi
b/arch/arm/boot/dts/imx7-colibri.dtsi
index e4e32aa786f4..f61041af026a 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -329,6 +329,7 @@
MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x14 /* SODIMM
127 */
MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x14 /* SODIMM
131 */
MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x14 /* SODIMM
133 */
+ MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x14 /* SODIMM
169 */
MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x14 /* SODIMM
24 */
MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM
100 */
MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM
102 */
@@ -439,7 +440,6 @@
MX7D_PAD_SD3_CLK__NAND_CLE 0x71
MX7D_PAD_SD3_CMD__NAND_ALE 0x71
MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B 0x71
- MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B 0x71
MX7D_PAD_SAI1_TX_DATA__NAND_READY_B 0x74
MX7D_PAD_SD3_STROBE__NAND_RE_B 0x71
MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x71
--
2.15.1
