Dan, Thanks for the updated patch set. Applied to linux-leds.git.
-- Best regards, Jacek Anaszewski On 12/18/2017 09:23 PM, Dan Murphy wrote: > Update the lp8860 bindings to fix various issues > found. Rename enable-gpio to enable-gpios, > update the node name to the device name and > indent the node example. > > Reviewed-by: Rob Herring <r...@kernel.org> > Signed-off-by: Dan Murphy <dmur...@ti.com> > --- > > v5 - Update commit message to remove address and size cells - > https://patchwork.kernel.org/patch/10108357/ > > v4 - No changes > v3 - Indicatd enable-gpios is active high, moved address and size cells to > child > node patch and updated parent DT node name - > https://patchwork.kernel.org/patch/10093745/ > v2 - New patch > > Documentation/devicetree/bindings/leds/leds-lp8860.txt | 14 +++++++------- > 1 file changed, 7 insertions(+), 7 deletions(-) > > diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt > b/Documentation/devicetree/bindings/leds/leds-lp8860.txt > index aad38dd94d4b..b9d09acbaa73 100644 > --- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt > +++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt > @@ -6,22 +6,22 @@ current sinks that can be controlled by a PWM input > signal, a SPI/I2C master, or both. > > Required properties: > - - compatible: > + - compatible : > "ti,lp8860" > - - reg - I2C slave address > - - label - Used for naming LEDs > + - reg : I2C slave address > + - label : Used for naming LEDs > > Optional properties: > - - enable-gpio - gpio pin to enable/disable the device. > - - supply - "vled" - LED supply > + - enable-gpios : gpio pin to enable (active high)/disable the device. > + - vled-supply : LED supply > > Example: > > -leds: leds@6 { > +led-controller@2d { > compatible = "ti,lp8860"; > reg = <0x2d>; > label = "display_cluster"; > - enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; > + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; > vled-supply = <&vbatt>; > } > >
