Hi Javier, I love your patch! Yet something to improve:
[auto build test ERROR on next-20171214] [cannot apply to char-misc/char-misc-testing v4.15-rc3 v4.15-rc2 v4.15-rc1 v4.15-rc4] [if your patch is applied to the wrong git tree, please drop us a note to help improve the system] url: https://github.com/0day-ci/linux/commits/Javier-Martinez-Canillas/tpm-only-attempt-to-disable-the-LPC-CLKRUN-if-is-already/20171220-041605 config: x86_64-randconfig-x007-201751 (attached as .config) compiler: gcc-7 (Debian 7.2.0-12) 7.2.1 20171025 reproduce: # save the attached .config to linux build tree make ARCH=x86_64 All errors (new ones prefixed by >>): drivers/char/tpm/tpm_tis_core.c: In function 'tpm_tis_core_init': >> drivers/char/tpm/tpm_tis_core.c:836:26: error: assignment of member >> 'clk_enable' in read-only object chip->ops->clk_enable = NULL; ^ vim +/clk_enable +836 drivers/char/tpm/tpm_tis_core.c 815 816 /* Maximum timeouts */ 817 chip->timeout_a = msecs_to_jiffies(TIS_TIMEOUT_A_MAX); 818 chip->timeout_b = msecs_to_jiffies(TIS_TIMEOUT_B_MAX); 819 chip->timeout_c = msecs_to_jiffies(TIS_TIMEOUT_C_MAX); 820 chip->timeout_d = msecs_to_jiffies(TIS_TIMEOUT_D_MAX); 821 priv->phy_ops = phy_ops; 822 dev_set_drvdata(&chip->dev, priv); 823 824 if (is_bsw()) { 825 priv->ilb_base_addr = ioremap(INTEL_LEGACY_BLK_BASE_ADDR, 826 ILB_REMAP_SIZE); 827 if (!priv->ilb_base_addr) 828 return -ENOMEM; 829 830 clkrun_val = ioread32(priv->ilb_base_addr + LPC_CNTRL_OFFSET); 831 /* Check if CLKRUN# is already not enabled in the LPC bus */ 832 if (!(clkrun_val & LPC_CLKRUN_EN)) { 833 priv->flags |= TPM_TIS_CLK_ENABLE; 834 iounmap(priv->ilb_base_addr); 835 priv->ilb_base_addr = NULL; > 836 chip->ops->clk_enable = NULL; 837 } 838 } 839 840 if (chip->ops->clk_enable != NULL) 841 chip->ops->clk_enable(chip, true); 842 843 if (wait_startup(chip, 0) != 0) { 844 rc = -ENODEV; 845 goto out_err; 846 } 847 848 /* Take control of the TPM's interrupt hardware and shut it off */ 849 rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask); 850 if (rc < 0) 851 goto out_err; 852 853 intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT | 854 TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT; 855 intmask &= ~TPM_GLOBAL_INT_ENABLE; 856 tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask); 857 858 rc = tpm2_probe(chip); 859 if (rc) 860 goto out_err; 861 862 rc = tpm_tis_read32(priv, TPM_DID_VID(0), &vendor); 863 if (rc < 0) 864 goto out_err; 865 866 priv->manufacturer_id = vendor; 867 868 rc = tpm_tis_read8(priv, TPM_RID(0), &rid); 869 if (rc < 0) 870 goto out_err; 871 872 dev_info(dev, "%s TPM (device-id 0x%X, rev-id %d)\n", 873 (chip->flags & TPM_CHIP_FLAG_TPM2) ? "2.0" : "1.2", 874 vendor >> 16, rid); 875 876 probe = probe_itpm(chip); 877 if (probe < 0) { 878 rc = -ENODEV; 879 goto out_err; 880 } 881 882 /* Figure out the capabilities */ 883 rc = tpm_tis_read32(priv, TPM_INTF_CAPS(priv->locality), &intfcaps); 884 if (rc < 0) 885 goto out_err; 886 887 dev_dbg(dev, "TPM interface capabilities (0x%x):\n", 888 intfcaps); 889 if (intfcaps & TPM_INTF_BURST_COUNT_STATIC) 890 dev_dbg(dev, "\tBurst Count Static\n"); 891 if (intfcaps & TPM_INTF_CMD_READY_INT) 892 dev_dbg(dev, "\tCommand Ready Int Support\n"); 893 if (intfcaps & TPM_INTF_INT_EDGE_FALLING) 894 dev_dbg(dev, "\tInterrupt Edge Falling\n"); 895 if (intfcaps & TPM_INTF_INT_EDGE_RISING) 896 dev_dbg(dev, "\tInterrupt Edge Rising\n"); 897 if (intfcaps & TPM_INTF_INT_LEVEL_LOW) 898 dev_dbg(dev, "\tInterrupt Level Low\n"); 899 if (intfcaps & TPM_INTF_INT_LEVEL_HIGH) 900 dev_dbg(dev, "\tInterrupt Level High\n"); 901 if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT) 902 dev_dbg(dev, "\tLocality Change Int Support\n"); 903 if (intfcaps & TPM_INTF_STS_VALID_INT) 904 dev_dbg(dev, "\tSts Valid Int Support\n"); 905 if (intfcaps & TPM_INTF_DATA_AVAIL_INT) 906 dev_dbg(dev, "\tData Avail Int Support\n"); 907 908 /* INTERRUPT Setup */ 909 init_waitqueue_head(&priv->read_queue); 910 init_waitqueue_head(&priv->int_queue); 911 if (irq != -1) { 912 /* Before doing irq testing issue a command to the TPM in polling mode 913 * to make sure it works. May as well use that command to set the 914 * proper timeouts for the driver. 915 */ 916 if (tpm_get_timeouts(chip)) { 917 dev_err(dev, "Could not get TPM timeouts and durations\n"); 918 rc = -ENODEV; 919 goto out_err; 920 } 921 922 if (irq) { 923 tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED, 924 irq); 925 if (!(chip->flags & TPM_CHIP_FLAG_IRQ)) 926 dev_err(&chip->dev, FW_BUG 927 "TPM interrupt not working, polling instead\n"); 928 } else { 929 tpm_tis_probe_irq(chip, intmask); 930 } 931 } 932 933 rc = tpm_chip_register(chip); 934 if (rc && is_bsw() && priv->ilb_base_addr) 935 iounmap(priv->ilb_base_addr); 936 937 if (chip->ops->clk_enable != NULL) 938 chip->ops->clk_enable(chip, false); 939 940 return rc; 941 out_err: 942 tpm_tis_remove(chip); 943 if (is_bsw()) 944 iounmap(priv->ilb_base_addr); 945 946 if (chip->ops->clk_enable != NULL) 947 chip->ops->clk_enable(chip, false); 948 949 return rc; 950 } 951 EXPORT_SYMBOL_GPL(tpm_tis_core_init); 952 --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation
.config.gz
Description: application/gzip
