This flag is only used to warn if CLKRUN_EN wasn't disabled on Braswell
systems, but the only way this can happen is if the code is not correct.

So it's an unnecessary check that just makes the code harder to read.

Suggested-by: Jarkko Sakkinen <jarkko.sakki...@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javi...@redhat.com>
---

 drivers/char/tpm/tpm_tis.c      | 15 ---------------
 drivers/char/tpm/tpm_tis_core.c |  2 --
 drivers/char/tpm/tpm_tis_core.h |  1 -
 3 files changed, 18 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index d29add49b033..d0ad9a89b02b 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -138,9 +138,6 @@ static int tpm_tcg_read_bytes(struct tpm_tis_data *data, 
u32 addr, u16 len,
 {
        struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-       if (is_bsw() && !(data->flags & TPM_TIS_CLK_ENABLE))
-               WARN(1, "CLKRUN not enabled!\n");
-
        while (len--)
                *result++ = ioread8(phy->iobase + addr);
 
@@ -152,9 +149,6 @@ static int tpm_tcg_write_bytes(struct tpm_tis_data *data, 
u32 addr, u16 len,
 {
        struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-       if (is_bsw() && !(data->flags & TPM_TIS_CLK_ENABLE))
-               WARN(1, "CLKRUN not enabled!\n");
-
        while (len--)
                iowrite8(*value++, phy->iobase + addr);
 
@@ -165,9 +159,6 @@ static int tpm_tcg_read16(struct tpm_tis_data *data, u32 
addr, u16 *result)
 {
        struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-       if (is_bsw() && !(data->flags & TPM_TIS_CLK_ENABLE))
-               WARN(1, "CLKRUN not enabled!\n");
-
        *result = ioread16(phy->iobase + addr);
 
        return 0;
@@ -177,9 +168,6 @@ static int tpm_tcg_read32(struct tpm_tis_data *data, u32 
addr, u32 *result)
 {
        struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-       if (is_bsw() && !(data->flags & TPM_TIS_CLK_ENABLE))
-               WARN(1, "CLKRUN not enabled!\n");
-
        *result = ioread32(phy->iobase + addr);
 
        return 0;
@@ -189,9 +177,6 @@ static int tpm_tcg_write32(struct tpm_tis_data *data, u32 
addr, u32 value)
 {
        struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
 
-       if (is_bsw() && !(data->flags & TPM_TIS_CLK_ENABLE))
-               WARN(1, "CLKRUN not enabled!\n");
-
        iowrite32(value, phy->iobase + addr);
 
        return 0;
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 3455abbb2035..09da1e1adc40 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -746,7 +746,6 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, 
bool value)
                return;
 
        if (value) {
-               data->flags |= TPM_TIS_CLK_ENABLE;
                data->clkrun_enabled++;
                if (data->clkrun_enabled > 1)
                        return;
@@ -777,7 +776,6 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, 
bool value)
                 * sure LPC clock is running before sending any TPM command.
                 */
                outb(0xCC, 0x80);
-               data->flags &= ~TPM_TIS_CLK_ENABLE;
        }
 }
 
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index afc50cde1ba6..d5c6a2e952b3 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -86,7 +86,6 @@ enum tis_defaults {
 
 enum tpm_tis_flags {
        TPM_TIS_ITPM_WORKAROUND         = BIT(0),
-       TPM_TIS_CLK_ENABLE              = BIT(1),
 };
 
 struct tpm_tis_data {
-- 
2.14.3

Reply via email to