cmdline param "no-hlt" has been removed in commit
27be457000211a6903968dfce06d5f73f051a217.
Signed-off-by: zhenwei.pi <zhenwei...@youruncloud.com>
---
arch/x86/Kconfig | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d4fc98c..fa9c33c 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2426,19 +2426,18 @@ menuconfig APM
1) make sure that you have enough swap space and that it is
enabled.
- 2) pass the "no-hlt" option to the kernel
- 3) switch on floating point emulation in the kernel and pass
+ 2) switch on floating point emulation in the kernel and pass
the "no387" option to the kernel
- 4) pass the "floppy=nodma" option to the kernel
- 5) pass the "mem=4M" option to the kernel (thereby disabling
+ 3) pass the "floppy=nodma" option to the kernel
+ 4) pass the "mem=4M" option to the kernel (thereby disabling
all but the first 4 MB of RAM)
- 6) make sure that the CPU is not over clocked.
- 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
- 8) disable the cache from your BIOS settings
- 9) install a fan for the video card or exchange video RAM
- 10) install a better fan for the CPU
- 11) exchange RAM chips
- 12) exchange the motherboard.
+ 5) make sure that the CPU is not over clocked.
+ 6) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
+ 7) disable the cache from your BIOS settings
+ 8) install a fan for the video card or exchange video RAM
+ 9) install a better fan for the CPU
+ 10) exchange RAM chips
+ 11) exchange the motherboard.
To compile this driver as a module, choose M here: the
module will be called apm.
--
2.7.4
