When using mcp23s08 module with gpio-keys, often (50% of boots) it fails to get irq numbers with message: "gpio-keys keys: Unable to get irq number for GPIO 0, error -6". Seems that irqs must be setup before devm_gpiochip_add_data().
Signed-off-by: Dmitry Mastykin <masti...@gmail.com> --- drivers/pinctrl/pinctrl-mcp23s08.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/pinctrl-mcp23s08.c b/drivers/pinctrl/pinctrl-mcp23s08.c index 9c950bbf..447763a 100644 --- a/drivers/pinctrl/pinctrl-mcp23s08.c +++ b/drivers/pinctrl/pinctrl-mcp23s08.c @@ -891,16 +891,16 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, goto fail; } - ret = devm_gpiochip_add_data(dev, &mcp->chip, mcp); - if (ret < 0) - goto fail; - if (mcp->irq && mcp->irq_controller) { ret = mcp23s08_irq_setup(mcp); if (ret) goto fail; } + ret = devm_gpiochip_add_data(dev, &mcp->chip, mcp); + if (ret < 0) + goto fail; + mcp->pinctrl_desc.name = "mcp23xxx-pinctrl"; mcp->pinctrl_desc.pctlops = &mcp_pinctrl_ops; mcp->pinctrl_desc.confops = &mcp_pinconf_ops; -- 2.7.4