3.16.52-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Geert Uytterhoeven <geert+rene...@glider.be>
commit b78412b8300a8453b78d2c1b0b925b66493bb011 upstream.
Patch series "sh: sh7722/sh7757i/sh7264/sh7269: Fix pinctrl registration",
v2.
Magnus Damm reported that on sh7722/Migo-R, pinctrl registration fails
with:
sh-pfc pfc-sh7722: pin 0 already registered
sh-pfc pfc-sh7722: error during pin registration
sh-pfc pfc-sh7722: could not register: -22
sh-pfc: probe of pfc-sh7722 failed with error -22
pinmux_pins[] is initialized through PINMUX_GPIO(), using designated
array initializers, where the GPIO_* enums serve as indices. Apparently
GPIO_PTQ7 was defined in the enum, but never used. If enum values are
defined, but never used, pinmux_pins[] contains (zero-filled) holes.
Hence such entries are treated as pin zero, which was registered before,
and pinctrl registration fails.
I can't see how this ever worked, as at the time of commit f5e25ae52fef
("sh-pfc: Add sh7722 pinmux support"), pinmux_gpios[] in
drivers/pinctrl/sh-pfc/pfc-sh7722.c already had the hole, and
drivers/pinctrl/core.c already had the check.
Some scripting revealed a few more broken drivers:
- sh7757 has four holes, due to nonexistent GPIO_PT[JLNQ]7_RESV.
- sh7264 and sh7269 define GPIO_PH[0-7], but don't use it with
PINMUX_GPIO().
Patch 1 fixes the issue on sh7722, and was tested. Patches 3-4 should
fix the issue on the other 3 SoCs, but was untested due to lack of
hardware.
This patch (of 4):
On sh7722/Migo-R, pinctrl registration fails with:
sh-pfc pfc-sh7722: pin 0 already registered
sh-pfc pfc-sh7722: error during pin registration
sh-pfc pfc-sh7722: could not register: -22
sh-pfc: probe of pfc-sh7722 failed with error -22
pinmux_pins[] is initialized through PINMUX_GPIO(), using designated array
initializers, where the GPIO_* enums serve as indices. As GPIO_PTQ7 is
defined in the enum, but never used, pinmux_pins[] contains a
(zero-filled) hole. Hence this entry is treated as pin zero, which was
registered before, and pinctrl registration fails.
According to the datasheet, port PTQ7 does not exist. Hence remove
GPIO_PTQ7 from the enum to fix this.
Link:
http://lkml.kernel.org/r/1505205657-18012-2-git-send-email-geert+rene...@glider.be
Fixes: 8d7b5b0af7e070b9 ("sh: Add sh7722 pinmux code")
Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
Reported-by: Magnus Damm <magnus.d...@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
Cc: Rich Felker <dal...@libc.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
Cc: Yoshinori Sato <ys...@users.sourceforge.jp>
Signed-off-by: Andrew Morton <a...@linux-foundation.org>
Signed-off-by: Linus Torvalds <torva...@linux-foundation.org>
Signed-off-by: Ben Hutchings <b...@decadent.org.uk>
---
arch/sh/include/cpu-sh4/cpu/sh7722.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/sh/include/cpu-sh4/cpu/sh7722.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7722.h
@@ -67,7 +67,7 @@ enum {
GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
/* PTQ */
- GPIO_PTQ7, GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
+ GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
/* PTR */
